Aligner

Kolle

Condition: used, Working width 450 mm Length of the planing table 1.400 mm planing height 100 mm Godpfxsvnu H As Ankjub

Condition: used, machine/vehicle number: 4/14242, Frank Floor Sanding Machine FSR used Engine power: 0,75 KW Voltage: 230 Volt 5 amps, 50 Hz, Machine no.: 4/14242 Dust bag Gusdpfxeb Auu Re Anksb Location: Ex warehouse Bitburg

Condition: used, Working width 600 mm Length of the planing table 1.400 mm Number of knives 2 St. knife system Streifenhobelemesser Gsdpfx Aeud Uxfjnksub

Condition: good (used), Year of construction: 1977, functionality: fully functional, Spindle Moulder Type F - Year of manufacture: 1977 - 3, 4, 5, 6, 8, 10,000 rpm - Right/left rotation - Spindle diameter 30 mm - Clamping length 140 mm - Wooden jaws, fence with fine adjustment, rotatable Godpfx Aox E Dctonksub - Table size: 1200 x 800 mm - Weight: 700 kg - with Holz Her 3-roller power feeder - good condition - Machine has been checked - Margin scheme taxation Shipping available at additional cost! Due to the age of the used machine, warranty is excluded when selling to commercial customers.

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine -Spindle adjustment: height and angle -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed apparatus Holz-Her 3 rolls Gedpfeh Nvyzox Ankjub -Useful shaft length: 100 mm -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg

Condition: used, Year of construction: 1993, Working width: 630 mm Planing height: 220 mm Cutterhead: Tersa Number of knives: 4 Height adjustment: electric Planing thickness display: digital display Feed speed: 4 / 6 / 12 m/min Gusdpfx Aneyxgahekeb Infeed roller: steel, segmented Outfeed roller: rubber Table rollers: yes Motor power: 7.5 kW Extraction port: 160 mm Machine length: 1200 mm Machine width: 1000 mm Weight: 1000 kg

Condition: used, Year of construction: 1993, Working width: 500 mm Cutter block: Leitz - Centrofix Number of knives: 4 Surfacing table length: 2800 mm Surfacing table adjustment: Lever Chip removal display: Scale Godjyhgiaopfx Ankoub Adjustable fence angle: Yes Motor power: 5.5 kW Machine length: 2800 mm Machine width: 1000 mm Weight: 900 kg

Year of construction: 2004, condition: excellent (used), Four-side planer -max. planing width 23cm -max planing height 16cm -2 pulling rollers in the table -chromed table - smooth regulation of the feed speed -2 pulleys from the top in front of the lower head, additionally a roller apparatus for short elements Gsdpfohlp D Nsx Ankoub - 4 spindles: lower 5.5kW, right 5.5kW, left 5.5kW, upper 7.5kw The machine is in very good condition, little used, with spiral heads on the bottom right and left, with a Terssa knife head on the top.

Condition: good (used), functionality: fully functional, Thicknessing machine HDA 63 - Planing width: 630 mm - Planing height: 230 mm - Table length: 1200 mm - 5.5 kW - Weight: 100 kg - 2 feed speeds - Dial gauge for height adjustment - Digital display at the mitre fence - 4-knife cutterblock Gsdpjx Htbzefx Ankjub - Rubber outfeed roller - Steel infeed roller - Width: 1100 mm - Good condition - Machine has been inspected Cutterblock outfeed (1050 x 1230 mm) can be electrically braked Transport available at extra cost! Due to the age of the used machine, warranty is excluded for commercial customers.

Condition: used, Year of construction: 1981, Table size: 1200 x 1000 mm Table height: 850 mm Swivel range: -5° to +45° Spindle speeds: 3000/4000/5000/6000/8000/10000 rpm Height adjustment: 120 mm Tool holder: MK5 incl. integral fence Weight: approx. 1000 kg Storage location: Nattheim Godjx It Aujpfx Ankeub

Condition: used, Year of construction: 1995, Swivel spindle: Yes -5 to 45° Height adjustment: Handwheel Swivel adjustment: Handwheel Milling jaw adjustment: manual Height display: mech. counter Swivel angle display: mech. counter Milling stop display: mech. counter Milling spindle diameter: 30mm / new milling spindle Speeds: 3000, 4500, 6000, 9000 Motor power: 5.5 kW Motor brake: Yes, automatic Suction connection: 2 x 120mm Machine length: 2000mm Gujdeuzkwzopfx Ankjb Machine depth: 1400mm weight: 900kg

Condition: used, Year of construction: 1984, used, in good condition Cleaned Function-tested Test run Manufacturer: Kölle Model: L2 Year of manufacture: 1984 Machine no.: 1788 Motor: 1.5 kW 2-lever operation Chuck runout max. 8/100 mm Table size: 520 x 290 mm Drill chuck: 20 mm Dowel drilling unit with 4 stops: 16, 22, 25, 32 mm Workpiece stop Digital height adjustment display Required space approx. 1000 x 1200 x 1300 mm Weight approx. 200 kg Gujdpfoy Apfnsx Ankeb Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-is condition as inspected, function-tested without refurbishment, without warranty or guarantee

Condition: excellent (used), functionality: fully functional, Panel saw KFS40 Upper extraction Rear roller table Gsdpfx Ajt Ecabsnkoub 1250 mm to the right of the blade Tiltable 45° Table 2600 mm Transport available at extra cost!

Condition: reconditioned (used), machine/vehicle number: 591, functionality: fully functional, Motor power 4kW table size 800 x 800 mm spindle Ø 30 mm suction nozzle 120 mm Handwheel height adjustment Gusdpfxsiw D Uho Ankeb fence jaws individually adjustable right/left rotation speeds 3/4/6/9000 rpm no brake

Condition: good (used), Slot Mortising Machine L2 - Year of manufacture: 1977 - Weight approx. 220 kg - Overall dimensions approx. 1,120 x 880 x 1,120 mm (W x D x H) - Table height approx. 980 mm - Table size approx. 820 x 350 mm Guodpfjywnuwsx Anksb - Power consumption 3.2 A / 3-phase power connection - Drilling depth approx. 150 mm - Drilling length approx. 200 mm - Max. drilling height approx. 120 mm - Drill chuck approx. 3–20 mm