Table milling machine

Aldinger ES23

Condition: used, Magnetic drill, hand drill -Magnetic base: Magnetor type PS 32 L -Drilling machine: AEG type HBE-IV - Recording: MK2 -Max. Drill: Ø 23 mm Lhedpfjfc R D Aox Ab Ajn -Connection: 265V/200Hz -Dimensions: 700/300/H670 mm -Weight: 49 kg

Condition: used, Wig welding machine L-TEC, Inverter TIG 200 DC type WIG welding machine for direct current DC Serial no. 184548, year of manufacture approx. 1994 Lhodpfxsdzqb Es Ab Aen Power: 200 Amps = 60% duty cycle 155 Amps = 100% duty cycle Adjustment range: stepless Current type: DC (direct current) Mains connection: 400 Volts, 50 Hz, 32 Amps plug - 4 meter hose set with central connection and hand torch - with remote potentiometer (foot switch) - gas pressure regulator - DC only - HF ignition Space requirement L x W x H: 850 x 480 x 740 mm Weight: approx. 150 kg The welding test yields very good results when welding stainless steel with direct current. Otherwise in good condition.

Condition: used, Year of construction: 2013, operating hours: 8,682 h, axle configuration: 4x4, power: 164 kW (222.98 HP), maximum speed: 80 km/h, first registration: 04/2013, color: orange, empty load weight: 8,293 kg, maximum load weight: 5,707 kg, overall weight: 14,000 kg, number of seats: 2, gearing type: other, mileage: 159,883 km, suspension: steel, driver cabin: day cab, wheelbase: 3,000 mm, brakes: other, emission class: none, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, compressed air brake, differential lock, front linkage, front power take-off, front-end loader, onboard computer, power assisted steering, traction control, trailer coupling, * German vehicle * First owner * Condition, see photos * Original: only 8,682 operating hours * Front and rear PTO * Municipal hydraulics at the front and rear * Front mower * Mulag boom MRS300 * Mulag verge mowing head RMK1200 * Rear mower * Mulag rear boom MHS800 * with Mulag mowing head MK1200 * Municipal and rear hydraulics * Rear linkage * Mulag verge mowing unit MRS 300 * Ideal for mowing in areas near roads, operating on the left and right sides * 3-point attachment to the front linkage * Reach up to 3.00 m * Drive via front PTO * Control: electro-hydraulic * Mowing head relief * Distance-dependent feeler automation * Verge mowing head RMK 1200 * Working width 1,200 mm * Telescopic rear boom mowing unit MHS 800 * Lateral displacement 1,600 mm * Reach, left and right 8.70 m * Automatic ground sensing * High portal for driving over obstacles up to 3.90 m * One-hand control panel with multi-function lever * Quick-change device * Mulag flail mowing head MK 1200 * Overall width 1,580 mm * Boom utilization * Comfortable cabin with 2 seats * Air conditioning * Windshield heating * Outside temperature display * Comfortable driver's suspension seat * Electrically heated mirrors * JCB Power Shift transmission with three load-shifting stages * Disc brakes * ABS * Differential lock * All-round warning lights * Wide-angle warning beacons * Work lights * 4x4 all-wheel drive * Tires: 495/70R24 * Top speed: 80 km/h * LOF tractor unit, agricultural tractor * Wheelbase: 3,000 mm * GVWR: 12,000 kg * LOF approval Lodpfx Abjvhqbcs Ajhn * In the event of a sale to commercial businesses and for export (non-EU and EU), the German commercial law applies. If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without a new DGUV, without a new SP, without a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer a viewing and inspection of the goods so that no false impressions arise regarding their condition and suitability for the buyer. Viewings and inspections are possible at any time by appointment and are expressly desired. All information is provided without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods / vehicle. Subject to change, prior sale and errors.

Condition: used, functionality: limited functionality, 1.Equalizer. - shaft width 260 mm - length of tabletops 1560 mm Ledpjqwg Efsfx Ab Ashn 2.Thicknessing machine - thickness of the workpiece 180mm 3.Drilling machine - max tool diameter 18 mm - drilling depth 80 mm - drilling width 140 mm - table top adjustable up/down front/back and sideways 4.Circular saw - NO SAW BLADE 5.Milling machine - Spindles 30 mm - Adjustable spindle CONDITION AND COMPLETENESS AS IN PICTURES

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine -Spindle adjustment: height and angle -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm Lsdjh Nvyzopfx Ab Ajhn -Feed apparatus Holz-Her 3 rolls -Useful shaft length: 100 mm -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2198535, overall weight: 2,409 kg, fuel type: diesel, tank capacity: 600 l, color: red, power: 160 kW (217.54 HP), output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 160 kW (217.54 HP), nominal power (apparent): 220 kVA, continuous power: 160 kW (217.54 HP), continuous power (apparent): 220 kVA, total length: 3,300 mm, total width: 1,200 mm, total height: 1,970 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: FPT/Iveco, type of cooling: water, fuel consumption (combined): 42.1 l/100km, fuel consumption (urban): 24 l/100km, fuel consumption (extra-urban): 32.87 l/100km, fuel: diesel, fuel tank capacity: 600 l, battery capacity: 100 Ah, battery voltage: 12 V, input voltage: 12 V, input frequency: 50 Hz, input current: 32 A, operating temperature: 25 °C, ambient temperature (min.): -25 °C, ambient temperature (max.): 45 °C, control cabinet height: 1,970 mm, control cabinet length: 3,300 mm, control cabinet width: 1,200 mm, protection type (IP code): IP65, rotational speed (min.): 1,500 rpm, temperature: 25 °C, type of input current: three-phase, warranty duration: 12 months, Equipment: documentation/manual, mobile diesel tank, De Bredenoord 200 KVA generator is een betrouwbare en veelzijdige oplossing voor tijdelijke en langdurige stroombehoeften in diverse omgevingen. Het aggregaat is ideaal voor mobiel gebruik en voldoet aan de emissie-eisen van Stage-V. De efficiënte PFT/Iveco motor, gecombineerd met een Stamford generator, levert uitstekende prestaties en lage operationele kosten. De generator is uitgevoerd in een geluidsisolerende omkasting die zorgt voor een minimale geluidsuitstoot, ideaal voor gebruik in geluidsgevoelige omgevingen (super silent). De kast is voorzien van dikke, oliebestendige geluidsisolatie en externe stekkerdozen met zekeringautomaten voor extra veiligheid. Met een brandstoftank van 600 liter heeft de generator een autonomie van maximaal 14 uur bij continu gebruik. Het systeem werkt op diesel, HVO of GTL brandstof, wat zorgt voor flexibele brandstofopties. Technische Specificaties: - Model: Bredenoord 200 KVA - Nom. vermogen: 220 KVA - Max. vermogen: 220 KVA - Motor: FPT/Iveco NEF67TM7 - Generator: Stamford borstelloze alternator (AVR) - Vermogen: 220 KVA - Voltage: 230/400 V, 50 Hz - Toerental: 1500 tpm - Geluidsniveau: 68 dB(A) op 7 meter - Brandstoftank: 600 liter - Autonomie: - 100% PRP: 14 uur - 70% PRP: 18 uur - Motorvermogen:160 KW - Batterijlader en motorverwarming: Standaard aanwezig - Control panel: Comap MRS16 (auto start/stop) - Afmetingen (L x B x H): 3.30 m x 1.20 m x 1.97 m - Gewicht: 2409 kg - Emissieklasse: Stage-V Brandstofverbruik: - 100% PRP: 42,1 L/h - 70% PRP: 32,87 L/h - 50% PRP: 24 L/h Opties: - Motorverwarming - Batterijlader Lsdswf Nkcspfx Ab Ajhn - 3-weg brandstofkraan - XXL brandstoftank Geluidsdemping: De generator is ontworpen met geoptimaliseerde luchtinlaten en speciale isolatiematerialen die geluid minimaliseren. De geluidsisolatie is versterkt met wol van verschillende diktes om geluid over een breed frequentiespectrum te reduceren. Dit maakt het ideaal voor gebruik in geluidsgevoelige gebieden. Duurzaamheid: De omkasting is bestand tegen corrosie dankzij een verflaag die getest is voor meer dan 2000 uur (C5I-H). Dit zorgt voor een lange levensduur, zelfs in de meest uitdagende omstandigheden. Veiligheid: De generator is uitgerust met versterkte sloten en roestvrijstalen scharnieren. De deuren zijn ontworpen met een afgeschuinde hoek van 20 graden om waterophoping te voorkomen en oxidatie te minimaliseren. Transport en Verplaatsing: De generator is gemakkelijk te verplaatsen dankzij versterkte hijsogen en stalen balken, die zorgen voor eenvoudig transport op bouwlocaties. Het ontwerp zorgt voor een stabiele en veilige verplaatsing van de generator zonder risico op schade. Klantspecifieke Aanpassingen: De Bredenoord 200 KVA generator is beschikbaar in verschillende uitvoeringen, van 20 KVA tot 600 KVA. Klantspecifieke aanpassingen zijn mogelijk, waardoor de generator kan worden aangepast aan specifieke eisen en toepassingen. Certificeringen: - CE-gecertificeerd - Europese makelij Toepassingsgebieden: De generator is geschikt voor diverse sectoren, waaronder de bouw, industrie en andere toepassingen waar betrouwbare en efficiënte stroomvoorziening vereist is.

Condition: used, machine/vehicle number: 1210A15, mileage: 29,049 km, power: 96 kW (130.52 HP), first registration: 01/1984, fuel type: diesel, overall weight: 7,490 kg, color: blue, gearing type: mechanical, Equipment: all wheel drive, parking heater, trailer coupling, TUV and AU are made NEW!!! KFZVersicherung 270, -Euro per year!!! KFZ is differential taxed VAT not showable. The Magirus is in a good and very well maintained condition directly from the THW only a few months out of service, and equipped with: double cab with 9 to 11 seats roller shutter body with shelves and drawers, four-wheel drive, rear axle lock, several other Magirus / Iveco vehicles are still in my offer e my vehicles are with data and prices on my homepage r info??? Call 0049 (0) 2248 le Gru?e Your Philipp from the Hanfbachtal Lsdpfxeqx Sv Aj Ab Aohn

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is an as-new Drechselmeister Twister FU 180 wood lathe with a center distance of 560 mm. The demonstration machine is in its original condition, so you receive full warranty coverage. Technical Specifications - Center height: 180 mm - Swing over bed: 358 mm (can be extended with optional outboard turning attachment – depending on workpiece) - Center distance: approx. 560 mm (extendable) Lhodpfotphy Aex Ab Aon - Spindle connection: M33 x 3.5 with ASR (Euro) anti-loosening groove* - Spindle and tailstock taper: MK2 - Speeds (2 belt ranges): 50 – 1,230 rpm and 150 – 3,700 rpm - Quill travel: 100 mm (with scale), with trapezoidal threaded spindle - Motor: 1.1 kW / 1.5 HP (230 V) - Total length: 1,345 mm - Weight, freestanding version: 144 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Shipping by carrier: Austria: € 95.00 incl. VAT Germany: € 120.00 incl. VAT South Tyrol: € 140.00 incl. VAT If you are interested in this machine, please enter your complete address details in the contact form so that we can process your inquiry professionally! Thank you, your NEUREITER Team Related terms: woodturning machine, lathe, woodworking lathe, turning, woodturning, turning tools, wood turning, machinery Reference: R-A0117

Condition: ready for operation (used), Year of construction: 1992, - Double mitre circular saw ADS type M - 2 saw heads Ljdpsucuhdefx Ab Ashn - max. saw length 5000mm

Condition: used, - Working width (mm): 140 Lhsdpfx Asrg Exrsb Ajn - Shafts: 7 1st shaft: bottom 2nd shaft: right 3rd shaft: left 4th shaft: right 5th wave: top 6th wave: bottom 7th wave: uni-wave