Box grinder KED S10

KED S10

Condition: new, Type SK-1000-P6 Working width 1000 mm Min.working length 500 mm Lrsdpfxodmi Nio Ad Neg Working thickness 2-150mm Polishing roller speed - Frequency control Feeding speed 3-12,5 m/min Total motor power 13.87 kW Disc motor 1.5 kW*1 Cross motor 1.5 kW *1 Screw roller motor 2.2 kW *2 Feeding power 2.2 kW Up and down motor 0.37kW*4 Swing motor 0.37kW *2 Working table up and down 0.55 kW Transport dimensions 3650x1850x2100mm Weight 4200 kg

Condition: used, Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm Control ja weight 3300 kg Dimensions (L/W/H) 2600x920x1890 mm Dust suction hood 2x180, 2x120 mm Löwer DSM 2004 Double-Sided Sanding Machine ----- 4-Belt Sander + Disc Unit (Top/Bottom) Manufacturer's Description: ----- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, and finishing, each from above and below 1. Belt grinding unit with heavy steel roller Lrjdpevu Hgbjfx Ad Nog 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) - Direct-drive grinding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated grinding shoes with very good thermal conductivity and absolute dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer belt life - Forced pneumatically controlled grinding belt oscillation - Effective grinding dust extraction directly at the grinding rollers - Airborne dust extraction at the tension rollers - Integrated brushing and finishing unit with large grinding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large linear ball bearing sets on hardened and ground precision shafts with dust and Dirt protection - Chip removal adjustment at the bottom via precision threaded spindle with dimension display via scale ring (0.1 mm resolution) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt release in seconds - Sanding belt tracking adjustment during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated, non-slip and adhesive conveyor belts over heavy-duty cast iron tables with a finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent workpiece transport - Geared feed motor with infinitely variable speed 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: ----- - Sanding belt speed 22 m/s - Sanding belt length 1800 mm - Sanding belt width 200 mm - Working width 190 mm - Sanding thickness 2-180 mm - Four brake motors for drive 5.5 kW - Feed motor 1.5 kW - Feed speed 4-20 m/min - Automatic height adjustment 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm at 0.37 kW each - Extraction ports 2 x 180 mm, 2 x 120 mm - Extraction air velocity 20 m/s - Pneumatic connection 6 bar - Working height 870 mm - Length (with soft disc 2740 mm) 2600 mm - Length with control unit (with soft disc 3035 mm) 2985 mm - Width 880 mm - Height 1910 mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE compliant Equipped with the following special options: -----...

Condition: ready for operation (used), Year of construction: 2008, Table size: 220 x 820 mm Table size (front table): 250 x 350 mm Lsdpfxsv Efn So Ad Nsrg Grinding wheel dimensions: 150 x 2260 mm Grinding belt speed: 16 m/s Drive motor: 400 V, 1.5 kW Weight: 164 kg Space required: 1200 x 600 x 1250 mm

Condition: excellent (used), Volpato LBK 150 edge grinder Grinding belt height 150mm Length of the grinding belt 2650mmm Oscillation of the grinding belt mechanical Raising/lowering the unit from the control panel Main motor 3kw Oscillation motor 0.37kw CE certificate Extraction nozzle 110mm Ledpfx Adovdpyve Norg

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Features and technical specifications: - Belt dimensions: 2600 × 200 mm - Worktable: 935 × 460 mm - Auxiliary table at belt tensioning roller: 350 × 350 mm (with round sanding attachment) - Sanding spindle with rubber rollers, supplied with sanding sleeves Ø 30, 40, 50, and 60 mm Lredpfoxwz I Iex Ad Njg - Oscillation (can be switched on/off), electromechanical with separate, maintenance-free oscillation motor - Table height adjustment via handwheel, additionally adjustable relative to the sanding belt (forward and backward) - Sanding unit tiltable from -10° to 90°, pivoted via handwheel with digital angle display - Precise angle accuracy ensured by mechanical locking of the sanding unit - Motor power: 2.2 kW - Belt speed: 15 m/s - Feed console with 3-roller feed and veneer device - Quick changeover from veneer to solid wood sanding - Height-adjustable idle disk table with adapter for dust extraction at the belt tensioning roller - Large-dimensioned mitre fence with stepless angle adjustment and movable ruler - Extraction: adapters Ø 100 mm on both sides (idle disk table, right and left extraction hoods) - 2 sockets 400 V on the machine base (for machine and feed unit) - Torsion-resistant, solid steel base for high running smoothness and stability - Large worktable with sliding surface - Recess in machine base for pallet truck for easier internal transport Dimensions: 1700 x 1000 x 1100 mm Weight: approx. 415 kg Availability: approx. mid-April 2026 Location: Hesse

Condition: new, Type 300 Brush roll width 320 mm Brush roll diametre 300 mm Working part 300 mm Lodpfx Asfhnx Ssd Nsrg Drum diameter 180mm Spindle 35 mm Transport dimensions 330x300x300 mm Weight 5,2 kg

Condition: used, Used machine Year of manufacture: 1988 Condition: well-maintained Lrsdjxzl Aqjpfx Ad Njg Equipment and technical specifications: - Length of worktables: 1,440 mm - Total width of two worktables: 710 mm - Worktable tilt adjustment: 0 – 30 degrees - Working pressure: 6 bar - Sanding belt length: 2,170 mm - Sanding belt width: 150 mm - Sanding belt speed: 10 – 20 m/sec - Vertical adjustment of oscillation unit: 125 mm - Air consumption: 25 NL/min - Electrical: 400 V / 2.9 kW Weight: 490 kg Availability: short notice Storage location: 63934 Röllbach

Condition: new, Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm LÖWER-DoubleSander Solid DSM 2004 ----- Double-sided four-belt single wood sander for Sanding solid wood such as window frames etc. Highly stable top design with innovative details. Suitable for high continuous loads even with higher chip removals. - sanding units arranged one after the other for pre-grinding, Fine sanding and finishing sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush - Directly driven grinding rollers for slip-free Power transmission - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Lodpfovnv Tqox Ad Nsrg Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large Grinding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, cast tables Finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor with stepless speed 4-20 m/min - all motors electrically protected - ergonomically arranged controls - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Grinding thickness 2-180mm - four brake motors for 5.5 kW drive - Feed motor 1.5 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units with fiber brushes D 120 x 200mm at 0.37 kW - Suction nozzle 2 x 180mm 2 x 120mm - Extraction air speed 20 m/s - Pneumatic connection 6 bar - Working height 870mm - Length (with soft disc 2740mm) 2600mm - Length with control panel (with soft disc 3035mm) 2985mm - Width 880mm - Height 1910mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional charge: Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled 4-belt sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Di...

Condition: used, Lightweight edge sander BGU Type KS 226 for precise sanding of straight and curved wood edges. The lightweight construction and powerful motor enable a consistent sanding pattern with high removal rates. Ideal for small carpentry shops, furniture construction, and interior design. sanding belt length: 2.250 mm Sanding belt width: 150 mm Ljdpfowcry Uex Ad Nerg table: swiveling engine power: 1,5 kW Suction nozzle: 100 mm

Condition: used, Lightweight edge sander Jet type EHVS-80 cs for precise sanding of straight and curved wood edges. The lightweight construction and powerful motor enable a consistent sanding pattern with high removal rates. Ideal for small carpentry shops, furniture construction, and interior design. sanding belt length: 2260 mm Sanding belt width: 150 mm Ljdpfxewffpbo Ad Norg table: Pivotable engine power: 1,5 kW Suction nozzle: 100 mm