Long belt sander

Johannsen T94

Condition: used, L + Z Lathe WEILER Type LZ PRIMUS GS Machine no. No. 2461 Year of construction approx. 1990 Center width 400 mm Turning diameter over bed 250 mm Center height above bed 125 mm Turning diameter over support 140 mm Center height above support 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm 18 steps Feed lengthwise and flat Chuck flange short taper DIN 55022 size 4 Inner tailstock taper MK 2 Drive power 1.1 kW and 1.5 kW pole-changing Mains connection 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw lathe chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change tool holder with 1 interchangeable cassette - Set of collets Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centering tip for collet chuck holder - Emergency stop - Hinged chuck guard - Splash guard - Machine light - electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H 1200 x 900 x 1560 mm Weight 520 kg good condition Hsdpfx Ajrtd Uweh Njng

Condition: used, Year of construction: 2007, working width 1380 mm workpiece height 70 mm Hedpfxet Hw Iis Ah Nong total power requirement 45 kW weight of the machine ca. 5.500 kg

Condition: new, Year of construction: 2026, crosscut and miter saw type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Machine via handwheel and worm gear (rear) Tiltable Hnsdpfoi Dfidox Ah Njg Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake u. Automat. Star delta motor control cutting width at 90deg: 420 mm cutting width at 45deg: swivelled: 295 mm Cutting height at 90deg: 200 mm Cutting height at 45deg tilted: 140 mm Saw can be tilted on one side up to approx. 25 degrees to acute angles and tilted flat to the left up to 30 degrees Machine stitched: approx. 250 kg Location: ex stock 54634 Bitburg - immediately available -

Year of construction: 1972, condition: ready for operation (used), Table Ø: 300 mm Overall height in horizontal position: 155 mm Width: 500 mm Hodsd Rlifepfx Ah Nong Depth: 500 mm

Condition: new, diameter 200 mm Hjdehuxbropfx Ah Nong height 105 mm weight of the machine ca. 25 kg dimensions of the machine ca. 400 x 280x 150 m

Condition: new, diameter 200 mm height 105/265 mm centre height 105 mm weight of the machine ca. 41 kg Hsdpfxeupxd Rs Ah Nong dimensions of the machine ca. 400 x 330 x 310 m

Condition: used, Technical details: Hnedpju Ixy Djfx Ah Nsg turning diameter over bed: 320 mm turning length: 800 mm centre distance: 800 mm centre height: 150 mm spindle bore of work spindle: 30 mm range of revolution per miute: 35 - 1500 / 16 step U/min range of feed in x - axis: 0,04 - 2,4 / 30 step m/min tailstock quill adjustment:: 125 mm tailstock taper MT: MK2 dimension machine xH: 1,7 x 0,8 x 1,5 m Equipment and other features: -3-jaw chuck Röhm 160mm -chuck guard -protection system WxH: 510x400mm -Multifix tool clamp (4 pieces) -Tip in tailstock -Upper slide swivels +/- 45°, maximum travel = 100mm -Cross slide travel = 300mm feed Pump for coolant device (without feed) *

Condition: used, with mounted three-jaw chuck table-Ø: 200 mm bore approx.: 18 mm overall height: 100 mm total height with chuck: 165 mm width: 270 mm length: 320 mm Hnedpfxjda I Rvj Ah Neg

Condition: good (used), NHH lathe Type: 1N611N Turning diameter bed: 260 mm Hodpeqgdkijfx Ah Nong Turning diameter support: 160 mm Spindle bore: 26 mm Turning lenght: 600 mm Digital measurement Diameter faceplate: 155 mm Speed: 2000 RPM Dimensions: 150x85x155 cm LxWxH

Condition: new, Year of construction: 2025, Depth of cut at 90°: 200 mm Depth of cut at 45°: 140 mm Cutting width at 90°: 420 mm Cutting width at 45°: 295 mm Hnodpfsiy Ry Aox Ah Nsg Miter range horizontal: 45° -90° -25° Miter range vertically: 60° -90° -30° Sawblade diameter: 520 mm rpm: 2800 U/min Motor: 5 kW motor brake: yes suction plant diameter: 100 mm weight: 490 kg