Facing and Centering Machine

SEMA END 70-1-2-S-100-NC-A

Condition: used, Year of construction: 1999, operating hours: 65,090 h, functionality: fully functional, ET365 GS with bar feeder and chip conveyor The machine is fully equipped - Collection tray - High-pressure pump - Control cabinet air-conditioning unit Bljdpfx Akeycvaqenop - Kupa loader - The machine was purchased from a running production operation and has been technically inspected - Geometry measured and all settings adjusted - Wearing parts replaced - All functions checked and adjusted as required The machine is fully operational and ready for immediate production The machine is available immediately

Condition: used, Year of construction: 2025, functionality: fully functional, Equipment: CE marking, Holz-Her Edgebanding Machine SPRINT 1329 Multi with motorized pressure beam PUR & EVA adhesive (up to 60mm) with the NEW GLU JET GJ725 PUR PRO including vacuum pump motorized infeed guide rail guide for narrow parts edge trimming IntelliSet - tool correction fa.s.t. - setup in the gap + remaining length display of the edge band roll iTronic - pressure & adhesive quantity control automatic chain lubrication second workpiece discharge + air cushion table in the infeed area fully motorized equipment for all units multifunction milling - radius 1.3mm (2x) & 2mm (2x) + nesting package, vertical, bottom spraying devices + padding unit with texture finish for normal applications and structured surfaces and more The machine is currently being refurbished at the factory in Voitsberg / Austria. Completion: approximately October / November 2026 Delivery, installation and training for the machine can be arranged directly through us for an additional fee. The machine is currently located in our delivery warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign language version, only the German version shall be binding. Bledjzx Ennjpfx Aknsp Our terms and conditions can be found on our website at holzher.de/de/agb.

Year of construction: 2020, condition: as good as new (ex-display), electrode diameter 0,5 to 3mm travels 300x400x350mm ) CE-cretification verifies the best possible safty all Machines in over-floor construction Blsdjf Hmn Aspfx Aknep Elektrode Ø 0,5-3mm Travel X-Axis 300mm Travel Y-Axis 400mm Travel Z-Axis 350mm Travel W-Axis 300mm Speed W Axis 30-60mm/min Rapid feed Z-Axis 120mm/min removal rate (max.) 300:1 Table dimension 320x440mm max.generator capacity 30A

Condition: used, Year of construction: 1961, max. workpiece diameter 100 mm Bledswwl I Iopfx Aknop min. workpiece diameter 10 mm workpiece length 1000 mm total power requirement 16 kW weight of the machine ca. 3 t dimensions of the machine ca. 0 m The guides have been outdated 10 years ago

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, pressing force: 4,000 t, 5. Forging hammer SMERAL type KJH 4 Weight of the ram, kg: 1’800 Ram impact rated energy, kgm: 4’000 Number of ram strokes,1/min: 48 Ram stroke, mm: 500 Die camping area, mm: 286 x 600 Min. Die Height, mm: 350 Output of main motor, kW: 45 Lenght of the machine, mm: 3’100 Widht of the machine, mm: 1’900 Height of the machine, mm: 3’900 Weight of the machine, kg: 27’000 Bjdpfx Aewbginoknolp

Condition: good (used), fuel type: diesel, lifting height: 29,500 mm, General information Year of manufacture: 2013 Technical information Chassis type: rigid Empty weight: 23.000 kg Functional Lifting capacity: 4.999 kg Dimensions of cargo space: 808 x 255 x 315 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Production country: FR Additional information Please contact Christian Theißen for more information Bljdsv Ti Hnspfx Aknep = Additional options and accessories = - Forks = Remarks = Manufacturer: Manitou Model: MRT 3050 Year of build: 2013 Condition: Used Data: Max. lifting height: 29,45 m Lifting capacity: 4.999 kg Max. extension: 25,00 m Length forks: 1,20 m Drive type: Diesel Rotation range: 360° Supports: 4 Transport dimensions LxWxH: 8,08 x 2,55 x 3,15 m Empty weight: 23.000 kg Special features: All-wheel steering.

Condition: good (used), Year of construction: 1997, Also available CONQUEST T51 model The used HARDINGE CONQUEST T42L 3-axis motorized CNC lathe is a robust and precise medium-sized inclined bed numerical control lathe, turning length approximately 700mm, bar passage 42m, automatic turret with 12 positions with motorized tools, FANUC 18-T CNC with color LCD and RS232 serial interface for data transfer 5″ ASA spindle Bjdpfjvtrc Sex Aknjlp maximum revolutions: 4,200 rpm continuous C-axis 20HP spindle power X-axis travel: 172mm Z-axis travel: 575mm machine weight 4,000 Kg. Complete with 210mm AUTOBLOCK hydraulic chuck, tool presetting, programmable tailstock, 2 motorized tool holders (1 axial and 1 radial), chip evacuator, set of fixed and manual tool holders and backup disk; Year of construction 1997; machine compliant with “CE” standards, in excellent condition.

Condition: good (used), Bar feeder LNS Bledpfx Aksr Iygionep

Condition: new, Year of construction: 2025, Laser power: 6000W/12000W/20000W Applicable Material: metal Condition: New Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 200m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cooling Mode: WATER COOLING Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Weight (KG): 11000KG Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1. Flagship Series Bjdpfxsg Du Aqe Aknelp Super dynamic responding, easily handle complex patterns of sheets. 2. Automatic Edge-finding With the capability of identifying irregular sheets, the edge searching time is decreased to 3 seconds. 3. Automated Nozzle Changer The machine changes its nozzle within 35 seconds at the fastest speed - this saves 50% of time costs.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 51 h, functionality: fully functional, machine/vehicle number: 641426, load capacity: 1,500 kg, We can offer you a KAUP pallet inverter, pallet turner Pallet Inverter: KAUP (made in Germany) Model: Inverter Type: 1.6T451W/0099 Machine number: 641426 Platform dimensions: 1470 x 1200 mm Maximum platform opening: 2275 mm Minimum platform opening: 280 mm Maximum stack weight: 1500 kg Motor power: 4 KW Bodjykh Tropfx Aknslp Connection: 380 volts Net weight: 2125 kg Year of manufacture: 04 / 2017 Machine dimensions (W x D x H): 3900 x 3950 x 3200 mm Transport dimensions (W x D x H): 3900 x 2300 x 2535 mm Price for the KAUP pallet inverter upon request via email This offer is valid while the machine is unsold Delivery conditions: Delivery time: from stock, subject to prior sale Delivery: ex works Baarle-Nassau Payment: prior to collection Prices: quoted net, excluding VAT Machinehandel De Leeuw BV is one of the few companies in Europe specializing in the trade and stock of predominantly used Kardex Remstar automated lift & carousel storage systems. We assemble and/or dismantle these systems safely using VCA-certified technicians, a service we have provided for over 33 years. Machinehandel De Leeuw BV Oordeelsestraat 7–B 5111 PA Baarle-Nassau The Netherlands