Italpresse PRE46 – Hydraulic Heated Platen Press GL 14-6/180

Italpress PRE46 –GL 14-6/180

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump Giedpfx Aod Tyvxea Eew - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 11

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beams No. 2 Horizontal top supporting beams (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Horizontal metal arms with vacuum cups, adjustables Gjdpoflc T Sjfx Aa Eoiw OPTIONAL No. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader No. 1 Motorized rollers table (which receives panels from the Loader) Separate electric and command panel Electronic Programmer Perimetral safety metal grids Total installed motor power Kw 17,7 Working capacity (cycles/min) 16-20 (ca.) Min/Max panels thickness mm 10-50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3000 (ca.)

Condition: used, Year of construction: 1997, No. 3214 Feed-through veneer press Sergiani LAS Plus Used, year of construction 1997, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Glue spreader / glue applicator not included (optionally available) Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing Gjdpfov Sthgsx Aa Eoiw High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: good (used), Code: 0328 Brand: ITALPRESSE Model: GL / 14,5 - 50 - 420 T - CE Standard Hydraulic press for composite materials and solid surfaces, moulds and decorative panels, suitable for use in the aerospace, aviation, woodworking, furniture, interior design, automotive, shipbuilding, construction, energy, defence, sports and public transport sectors, and various – CE Standard – Year 2005 Technical data: N°5 solid steel plates 1450 x 500 mm N° 3 pistons Diathermic oil heating Gsdpfx Aasyuyl Ie Eoiw Total thrust 420 tonnes Working diagram - see enclosed diagram Max power 9,3 Kw Full-load current 19 A The oil tank is located on top of the press and is fitted with a sight glass for checking the oil level Fluid (oil) temperature controller Two-hand control for closing the press Photocell safety barriers Fixed safety guards

Condition: like new (used), shelf length 3000 mm shelf width 1300 mm water heating 6 vertical hydraulic pressing pistons diameter of pistons 70 mm 3 hydraulic thrust pistons for stop movement diameter of pistons 80 mm 6 horizontal hydraulic cylinders loading table 1800x3000 mm Gsdpfx Asxygcija Esiw unloading table 1500x3000 mm

Condition: used, Year of construction: 2014, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, pressing force: 962 t, stroke length: 200 mm, table width: 1,400 mm, table length: 2,750 mm, working width: 1,400 mm, operating temperature: 135 °C, operating pressure: 290 bar, workpiece height (max.): 200 mm, workpiece weight (max.): 250 kg, cylinder diameter: 270 mm, opening width: 200 mm, plate width: 1,400 mm, pressure: 25 bar, temperature: 150 °C, We are offering this used ITALPRESSE MARK C/ 14-27.5/2 veneer press, year of manufacture 2014. Machine type: MARK/C 14-27.5/2 Serial number: 184450514 Rated voltage: 400 V Frequency: 50 Hz Year of manufacture: 2014 Single-level through-feed press system with top ram Machine is in perfect working condition Meets CE safety standards The machine can also be purchased together with other machines as part of a complete production line. Heating plate dimensions: 1400 x 2750 mm Number of heating plates: 2 units Number of levels: 1 unit Cylinder stroke: 200 mm Daylight opening: 200 mm Feed side: 1400 mm Specific pressure at 100%: 25 Kg/cm² Total pressing force: 9620 kN Cycle time: 2-30 min Operating temperature: 135°C Max. surface operating temperature: 150°C Intended heating medium: thermal oil Number of press cylinders: 6 units Diameter of press cylinders: 270 mm Return cylinders: 4 units Operating pressure: 290 bar Gsdpfeyxp Twjx Aa Esiw Closing speed: 50 mm/sec Opening speed: 50 mm/sec Operating voltage: 400 V Mould data: External mould dimensions: 1340 x 2540 mm Max. mould weight: 250 kg Mould cover dimensions: 1200 x 2400 mm Moulds are not included in this offer but can be supplied at additional cost Powered infeed roller conveyors: Dimensions: 1400 x 3500 mm Feed speed: 8-40 m/min Light barrier control Electropneumatic shaking device for the upper Mylar film Electronic flatness control Automatic switching to pressing speed Compressed air equipment in the lower press table Cylinder support plates are insulated and drilled from solid material for water cooling Feed speed with frequency control Powered outfeed roller conveyors, dimensions: 1400 x 3500 mm Electrical control cabinet / Siemens S7 PLC control panel Dismantling and collection at buyer’s own expense Pick-up location: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please send us a message or give us a call.