Bandsawmachines IMET X-TECH 360 2002

IMET

Condition: used, Year of construction: 2023, gebraucht 2023 Gedpjy Dh Ikjfx Ab Deit 6246 prompt, Zwischenverkauf v Italien 2970 € 1 300 mm 300 x (2)2,5 x 32 mm 33/66 U/Min 45 ° 45 ° rund 102 mm, Quadratprofi rund 90 mm, Quadratprofil rund 80 mm, Quadratprofil 500 mm 1050 mm 990 mm 135 kg demo machine / mint condition net price vice with quick clamping device and additional clapming strip for reduced cuttinag burr reduction gear and clutch to save the gear and sawing blades coolant equipment saw blade protection material gauge pedestal 1 saw blade operating manual in German or English

Condition: good (used), Year of construction: 2001, Manufacturer: KASTO Type: KASTOtec A3 Year of construction: 2001 Specifications: Metric Metric US Standard Sawing capacity round 90 Gijdpfx Abju R R Ace Djt 330 Sawing capacity flat 90° 330 x 330 mm Max. Sawing speed 12 - 120 Saw blade dimensions 6830 x 41 x 1.3 mm Saw power 7.5 kW Dimensions (estimate) length 4600 mm width 2150 mm height 2310 mm weight 4300 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: ready for operation (used), Year of construction: 1998, cutting diameter 305 mm capacity 90 degrees: flat 350 x 200 mm capacity 45 degrees: round 250 mm capacity 45 degrees: flat 230 x 200 mm capacity 60 degrees: round 175 mm capacity 60 degrees: flat 170 x 100 mm cutting speed 18 - 110 m/min vice max. 350 mm dimensions of saw-band 3370 x 27 x 0.9 mm engine output 1.5 / 1.8 kW weight of the machine ca. 880 kg range L-W-H 1700 x 2200 x 2000 mm Equipment: - robust, electro-hydraulic fully automatic band saw - user-friendly controls - Mitre cuts left to 45 . possible in automatic mode Gsdpfoyy A Hyex Ab Deit - Mitre cuts up to 60° . only possible in semi-automatic mode - Hydraulic power unit with automatic . pressure cut-off when idling - Stationary base frame * with large chip drawer and automatic cooling system - infinitely variable saw blade speed adjustment (ESC) - rotating chip brush - remnant min. 80 mm - operating instructions (PDF)

Condition: good (used), Machine is in good working condition. Gijdpfxjqzypms Ab Dot

Condition: new, Year of construction: 2025, saw band length: 4,420 mm, saw band width: 34 mm, Double-column bandsaw, fully automatic Everising H-360 HB Cutting range round: 0 - 360mm Cutting range square: 360 x 360mm Bundle tension: Width: 180 - 280mm Bundle tension height: 50 - 160mm Drive power: 3.7 kW Saw blade dimensions: 4420 x 34 x 1.1mm Weight: 2310 KG Machine dimension 2500 x 2200mm The standard equipment of the machines is as follows: Solid steel construction in double column principle - NC feed system - Frequency-controlled cutting speed (infinitely variable, inverter-controlled) - Digital cutting speed display - Hydraulically controlled double horizontal clamping vices - Hydraulic saw blade tensioning - Saw band guides (incl. band back guide) made of carbide - Hydraulically pre-tensioned band guides - Precise PLC control (SPS) for all hydraulic and electrical components. - Cutting counter with automatic switch-off - Automatic out-of-stock switch-off - Multi-job function - Bundle clamping device - Driven chip brush - Automatic band breakage control incl. emergency stop - Chip flushing gun - Flexible work light - 2 meter roller conveyor - Tool box - Carbide function Special equipment included: - Variable clamping pressure reduction - Cutting process control Gijdpfoq St U Njx Ab Dst Extensive complete German documentation.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 5,500 h, Circular Metal Saw manufactured in 2017. This Imet VELOX 350 AF-ENC features a saw blade diameter of Ø350 mm and a spindle speed of 3600 rpm. It includes an electronic feed control for programming length and quantity, along with an extraction system and a roller conveyor for 6m profiles. If you are looking to get high-quality cutting capabilities, consider the Imet VELOX 350 AF-ENC machine we have for sale. Contact us for further details. • Feed stroke (X-axis): 520 mm (multi-stroke capable) • Saw blade diameter: Ø350 mm • Blade bore: 22 mm Giodpfjyxpcrsx Ab Dst • Spindle speed: 3600 rpm • Control: ENC (Electronic Feed Control) for programming length and quantity • Operating hours: 5,500 Additional equipment • Extraction system • Roller conveyor for 6 m profiles

Condition: good (used), Year of construction: 2018, Used cold circular saw from IMET Model: Sirio 370 Saw blade diameter: 370 mm Semi-automatic Double mitre Giedpfjytb I Ijx Ab Djt Automatic raise/lower Year of manufacture: 2018

Condition: good (used), Year of construction: 1988, 1 x oil-flooded single bar feeder LNS Hydrobar 6.60 HS-4,4 Year of manufacture: 1988 In good condition. Technical data: Diameter: 28/36/44/52/58/63 mm Bar length: 3,100 mm Accessories: Machine feet The feeder can be inspected at our warehouse in Reichenbach. Giodpfxovawtpj Ab Dst

Condition: used, Year of construction: 2008, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 200x88 mm capacity 45 degrees: round 115 mm capacity 45 degrees: square 110 mm capacity 45 degrees: square 150x80 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,27 t dimensions 1,1 x 0,95 x 1,7 m - Hydropneumatic semi-automatic - Miter left/right 45° - head diagonal cuts up to 45° (shifter) - Ball bearing table - pneumatic. Double clamping device - Machine base with fog spray device Godeyt R Iqopfx Ab Djit - Chip extraction socket on the saw blade protective hood

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, saw blade diameter: 350 mm, total length: 1,020 mm, total height: 1,850 mm, total width: 810 mm, overall weight: 371 kg, type of input current: three-phase, rotational speed (min.): 37 rpm, rotational speed (max.): 74 rpm, input voltage: 400 V, IMET Sirio 350 3 Phase 400 Volt 2-speed motor runs flawlessly. Pneumatic vice with double clamping system. 37 & 74 RPM. Miter cuts possible from -45 to +60 degrees. Maximum clamping capacity: 180mm Maximum saw blade diameter: 350mm Current blade diameter: 315mm Gedoynugajpfx Ab Dsit Coolant pump mounted in the machine base. Emergency stop switch. Splash guard. Made in Italy. Year of manufacture: 1997 Overall dimensions: 102x81x185cm Weight: 371 KG Overall good condition! Contact us for shipping options! € 2,150.00

Condition: repair required (used), Details: Center height 190 mm turning length 500 mm Speed 15 - 3100 rpm - infinitely variable Gsdpfx Abed Ta Ico Djit The machine is not functional due to a missing motor Viewing is possible by appointment. Contact us, our team is happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours?

Condition: used, Year of construction: 1998, saw blade diameter 350 mm cutting diameter 110 mm capacity 90 degrees: flat 180 x 85 mm capacity 45 degrees: round 105 mm capacity 45 degrees: flat 130 x 85 mm capacity 60 degrees: round 105 mm capacity 60 degrees: flat 90 x 85 mm turning speeds 9-18-36-74 U/min vice max. 180 mm Control IMET CNC total power requirement 1.5 / 2.2 kW weight 710 kg range L-W-H 2000 x 1100 x 2000 mm Current new price approx. 25.000 euros Special price on request Circular saws are used to cut thin-walled tubes and profiles. Clean, precise cut edges are achieved with the circular saw. Fast sawing and easy miter adjustment are the advantages of the circular saw. Basically, you should also pay attention to the correct cooling of the materials. Cooling lubrication is essential for metallic materials. Cooling lubrication is not required for non-metallic materials such as plastic, brass or cast iron. Choosing the right tooth pitch is decisive for the optimal use of metal circular saw blades. For the material cross-section to be machined in connection with the material quality. Furnishing: - CNC fully automatic / vertically guided metal circular saw - swiveling CNC control, front left * Entry of parameters such as quantities and material lengths - Precision prism guide of the gear head, laterally adjustable - Hydro-pneumatic control of the saw unit - with automatic material feed & quantity specification * electro-pneumatic material feed unit - Smooth-running, powerful worm drive * with large transmission ratio - with miter adjustment via large turntable - continuous saw blade lowering Gijdjxabzyspfx Ab Dot - pneumatic material clamping - Stable base with built-in automatic cooling and large chip drawer - Micro spray device for stainless steel cuts (untested) - Safety device for feed device (hood) - Saw blade guard - User manual (PDF) * Machine link : ?machineno=1008-9164086

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, saw blade diameter: 315 mm, IMET SIRIO 315 circular saw with 3 m roller conveyor on the loading side and 3 m electronic stop on the unloading side Gedpfewzhnlox Ab Djit

Condition: new, Year of construction: 2026, operating hours: 2 h, Model 2023 - Professional fiber laser source XRAYmark with 20 Watt power and 400 kHz - Scanner unit "PreciseView" with camera for live image - T-slot plate or threaded hole plate for easy mounting of the marking unit (200 x 200 mm) - Viewing window with certified laser safety glass - scanning area approx. 100 x 100 mm - manual height adjustment - Housing with man. Lift door for easy and safe marking. EZCAD III software Gjdpfjd Ibu Nex Ab Doit - Barcode and QR-Code support - Serial number function - Batch scanning from Excel file - Laser parameter finder by matrix over 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP Connectivity. Various commands can now be transmitted to the software via TCP protocol. This allows the easy integration of external components like third party camera position detection etc. - Industry 4.0 via the TCP/IP protocol can be processed at any time the state. - Inputs and outputs for direct interaction with the outside world - New look and feel. A fresh design which allows an even clearer and more pleasant operation. - 3D preview for rotary axis machining - Performance increase of up to 50% through 64Bit Technology - Improved stability - Optional up to 4 axis control WITHOUT switching via PLUGins. - Optional DEEP engraving (slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching. - Completely redesigned Galvo Generation (Eco, Hi-Speed & 3D) with 2x laser pointer to visually check the focus position. Cuhn227e - LED illumination of the marking area - Connection possibility for external suction - Start button and emergency stop on the housing - Software for PC for Windows operating system - USB cable for connection to the computer - Instruction manual and operating software in German As option offer among other things =ᐳ IPG laser source / fiber laser source in various powers =ᐳ motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ Automation for stocking, conveyor belts and much more! =ᐳ 3D Marking and GRAVING Function. =ᐳ automatic focus adjustment =ᐳ rotating unit =ᐳ motorized carriage =ᐳ Interlock system for marking WITHOUT protective housing, but only with PPE (personal protective equipment) for bulky parts. incl. training in our training center Schweinfurt! Our engraving lasers are manufactured in our factory in Schweinfurt! Therefore, individual requests are possible at any time! =ᐳ Made in Schweinfurt! Pictures may contain options! Laser engraving machine, laser marker, laser marking, laser marking, laser engraving, laser engraver, laser marking, laser marking, laser marking system, laser marking system, laser marking system, marking laser, marking laser, marking laser Laser engraving machine, laser marker, laser marking, laser marking, laser engraving, laser engraver, laser marking, laser marking, laser engraving, laser engraving machine, #Laser marking machine for marking many materials. Extremely clean and high contrast #engravings are achieved with the fiber laser source. This #laser engraving machine is economical and easy to use.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, saw blade diameter: 370 mm, CNC Mitre Circular Saw Full-Automatic with Microprocessor Control Details: - Frequency-controlled saw drive: 13-73 rpm - Modern microprocessor control - Max. saw blade Ø up to 370 mm - Mitre angles: 60° left and 45° right - Large chip drawer - Vise with double clamping arm for burr-free cuts - Vertical clamping cylinder - Automatic cooling with electric submersible pump Technical Data: Cutting range at 90°: Ø 120 mm or 180 x 100 mm Saw motor: 3.0 kW-400 V Working height: 925 mm Weight approx. 750 kg Air connection: 6 bar Dimensions (LxWxH): 3,300 x 1,250 x 1,400 mm Giedow Uftqjpfx Ab Djt Working height: 900 - 980 mm