Cold Circular Saw
IMET SIRIO 350 AF-E CEB

Name: IMET SIRIO 350 AF-E CEB
Brand: IMET
Availability: InStock

Year of construction

1998

Condition

Used

Location

Ahaus

Cold Circular Saw IMET SIRIO 350 AF-E CEB

Show map

Machine data

Machine type:: Cold Circular Saw

Manufacturer:: IMET

Model:: SIRIO 350 AF-E CEB

Year of construction:: 1998

Condition:: used

Price & Location

Location:: Ahaus

Call

Details about the offer

Listing ID:: A19924660

Reference number:: 1125-9164086

Update:: 05.09.2025

Description

saw blade diameter 350 mm
Godpfx Asxabzysgfeua
cutting diameter 110 mm
capacity 90 degrees: flat 180 x 85 mm
capacity 45 degrees: round 105 mm
capacity 45 degrees: flat 130 x 85 mm
capacity 60 degrees: round 105 mm
capacity 60 degrees: flat 90 x 85 mm
turning speeds 9-18-36-74 U/min
vice max. 180 mm
Control IMET CNC
total power requirement 1.5 / 2.2 kW
weight 710 kg
range L-W-H 2000 x 1100 x 2000 mm
Current new price approx. 25.000 euros
Special price on request

Circular saws are used to cut thin-walled tubes and profiles. Clean, precise
cut edges are achieved with the circular saw. Fast sawing and easy miter
adjustment are the advantages of the circular saw.

Basically, you should also pay attention to the correct cooling of the
materials. Cooling lubrication is essential for metallic materials. Cooling
lubrication is not required for non-metallic materials such as plastic, brass
or cast iron.

Choosing the right tooth pitch is decisive for the optimal use of metal
circular saw blades. For the material cross-section to be machined in
connection with the material quality.

Furnishing:
- CNC fully automatic / vertically guided metal circular saw
- swiveling CNC control, front left
* Entry of parameters such as quantities and material lengths
- Precision prism guide of the gear head, laterally adjustable
- Hydro-pneumatic control of the saw unit
- with automatic material feed & quantity specification
* electro-pneumatic material feed unit
- Smooth-running, powerful worm drive
* with large transmission ratio
- with miter adjustment via large turntable
- continuous saw blade lowering
- pneumatic material clamping
- Stable base with built-in automatic cooling and large chip drawer
- Micro spray device for stainless steel cuts (untested)
- Safety device for feed device (hood)
- Saw blade guard
- User manual (PDF)

* Machine link :
?machineno=1008-9164086

Seller

Registered since: 2011

749 listings online

Call

Send inquiry

Telephone & Fax

+49 5939 ... show

Fax:

These listings may also fit your interest.

Listing

Rotary indexing table polishing machine HAU

Iserlohn

18,513 km

Rotary indexing table polishing machine
HAU

Call

Listing

Cold Circular Sawing - Automatic BERG & SCHMID VKS 370 VA MPS

Velen

18,508 km

Cold Circular Sawing - Automatic
BERG & SCHMIDVKS 370 VA MPS

Call

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm 180x100 mm Working height 925 mm saw blade turning speeds 15 - 70 U/min total power requirement 1,8/2,2 kW Gedpfx Agsd Iin Hjfsua weight of the machine ca. 0,71 t dimensions of the machine ca. 1,9 x 1,45 x 2,1 m ACTION PRICE!!! High-performance vertical circular saw hydropneumatic fully automatic.(20192) · miter left 60° + right 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth-running, powerful worm drive with large Transmission ratio, integrated in a stable cast housing for Achieving optimal cutting results · Vice with double clamping arm for low-burr cuts Lateral quick shift when changing the miter · Precision prism guide of the gear head, laterally adjustable · Particularly stable base frame with built-in automatic cooling system · Large chip drawer · Chip removal brush in the saw blade protective hood MPS control: · Save cut start/end · Display of current consumption, number of pieces, cutting time... · Adjustable water cooling · Cutting pressure regulator ATTENTION: Price is without saw blade!!! (saw blade price EUR 204)

See details

Listing

Contamine-sur-Arve

18,946 km

Swiss-type cnc lathe
BOLEYBC20-VI

Call

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Max. machining length : 50 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Z stroke : 150 [mm] - X stroke : 225 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 1.1 [kW] - Number of guide bush holders : 1 GUIDE BUSH HOLDER 1 - Number of positions : 5 - X/Y stroke : 97/133 [mm] SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 6 [kW] WEIGHT & DIMENSIONS - Machine floor space : 1063/2033 [mm] - Machine height : 1666 [mm] Guodpjuha Umefx Agfsa - Machine weight : 1700 [kg] EQUIPMENT - CNC : CINCOM 18iTB - Coolant tank - Bar loader : IEMCA SMART 320

See details

Listing

CNC machining center BIESSE Rover C 6.50 BIESSE Rover C 6.50 CONF.2

Trzin

18,352 km

CNC machining center BIESSE Rover C 6.50
BIESSERover C 6.50 CONF.2

€28,000

Fixed price VAT not applicable

Call

Condition: used, CNC machining center BIESSE Rover C 6.50 CONF.2, year 2007 Working area: approx. 140 × 460 cm Machine dimensions: 300 × 650 cm Gujdpfew Rpd Sjx Agfoa Weight: approx. 6,100 kg Two working heads Tool magazine: 22 positions Vertical drilling spindles: 28 pcs Horizontal drilling spindles: 12 pcs Price negotiable, available immediately. Price is without VAT.

See details

Listing

KALTENBACH KMR Carbide Circular Saw Kaltenbach KMR 100 AP

Lörrach

18,775 km

KALTENBACH KMR Carbide Circular Saw
KaltenbachKMR 100 AP

€49,000

EXW Fixed price plus VAT

Call

Condition: refurbished (used), functionality: fully functional, saw blade diameter: 360 mm, cutting height (max.): 100 mm, cutting range round steel at 90°: 100 mm, section length (min.): 300 mm, Fully automatic carbide circular saw machine type KMR 100 AP Gujdpfx Agjh Uqpvofja Refurbished to mint condition - available ex stock Working range: Round material 20 - 100 mm Square material 20 - 80 mm DRIVE PERFORMANCE Frequency-controlled saw motor 11.0 kW cuting speeds 20 - 150 m/min incl. Infeed magazine and sorting for trim cuts/rest pieces and good parts Suitable for cut off length up to 300 mm Cutting time for Ø 100 mm solid material 1.0037 approx. 7 seconds !!

See details

Listing

Automatic optimising end cutting saw WEINIG Dimter Opticut 200 Elite

Kežmarok

17,842 km

Automatic optimising end cutting saw
WEINIG DimterOpticut 200 Elite

Call

Condition: good (used), Year of construction: 2005, I sell the automatic pneumatic end cutting saw Weinig Grecon Dimter Opticut 200 Elite Year 2005 Motor power 7,5kW Input table automatic feeding 5,10m (throughfeed system) Outut table automatic 6 pcs. kickers on left outfeed table Guedsxtxg Hjpfx Agfea Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. CE version. Documentation included.

See details

Listing

Contamine-sur-Arve

18,946 km

Swiss-type cnc lathe
TORNOSGAMMA 20/5

Call

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Max. machining length : 210 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.001 [°] - Number of guide bush holders : 2 GUIDE BUSH HOLDER 1 - Number of positions : 8 - Number of motorized positions : 3 - Live tools speed : 8000 [rpm] GUIDE BUSH HOLDER 2 - Number of positions : 5 - Number of motorized positions : 2 - Live tools speed : 8000 [rpm] END ATTACHMENT - Number of positions : 5 Gusdpfjuha Nwex Agfja SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 POWER SUPPLY - Supply voltage : 400 [V] MACHINE HOURS - Number of spindle hours : 18849 [h] EQUIPMENT - CNC : Fanuc 31i-model A - Rotating tool motor on : S11,S21,S51 - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece - Chips conveyor - Coolant tank * with high-pressure pump : 20 [bars] - Bar loader : TORNOS SBF320 - Electric transformer - Number of turning tool holders : 5 - Double turning/milling tool holder : 1

See details

Listing

Mot. roll grooving machine f. pipe joints PIPE-JOINT P.J.E 10

Rödermark

18,557 km

Mot. roll grooving machine f. pipe joints
PIPE-JOINTP.J.E 10

Call

Year of construction: 1992, condition: good (used), machine/vehicle number: 10-166, OFFER 13467 Technical data: Gjdpfx Agshrm Iuofjua - max. material thickness at 40 kg/mm² strength approx. 3 mm - shaft reception 45 mm - manual hydraulic feed of the top roller - E. foot switch - drive 400 V / 1,1 kW - space requirement approx. W 550 x H 1200 x D 1200 mm - weight approx. 180 kg

See details

Listing

Double miter cold circular saw KASTO KASTOdisc A10

Fuldatal

18,418 km

Double miter cold circular saw
KASTOKASTOdisc A10

Call

Year of construction: 2004, condition: good (used), A used good condition double miter cold circular saw machine from KASTO Model: "KASTOdisc A10". - Fully automatic operation - Single cut - Hydrasulic saw bars - Central lubrication for saw guides - Coolant device - documentation Saw blade diameter 350mm Cutting range round 90°/ 45° 100/ 100mm square 90/ 45° 100x100/ 100x100mm Rectangle 90°/ 45° 170x100/ 130x100 Shortest remaining piece length with single cut at 90° 30mm Shortest remaining piece length in automatic mode at 90° 260mm Working height 950mm Dimensions WxDxH 1530x1348x1890 mm Weight 980kg Further tech. Data see pdf. document Guedpfx Agskfvhkjfsa Tech. Data and dimensions: Errors excepted

See details

Listing

Rödermark

18,557 km

Tube bending machines
KETTLER-CURVATUBI

Call

Year of construction: 1990, condition: good (used), Offer 20191 Year of manufacture approx. 1990, revision 2002 Guedpfx Ashrdmbegfoa Technical data: - Bending capacity at 45 kg / mm² up to approx. Ø 25 x 3 mm - Bending angle left + right selectable - Hydr. double sided bending function - Hydr. infeed ° - Drive 400 V / 11 kW - Space requirement approx. W 1750 x H 2200 x D 2300 mm - Weight approx. 1600 kg - with - bending angle adjustment - Hydr. tension - bending tools

See details

Advertise here