Linen DL 190S

Leinen DL 190S

Condition: good (used), Year of construction: 2002, From company liquidation: Peddinghaus Peddimax 1002 Cgodpfst Iklkox Abbon Year of manufacture 2002 Max. Punching and shearing capacity: 1000 kN Punches 31 mm holes in 25 mm steel Shears on the flat steel shear to 500 mm up to a material thickness of 18 mm steel Contact length stop Many accessories (special punches) Special punching device SV 90 up to 90 mm holes Weight: approx. 3,000 kg

Condition: used, Combined profile steel shear and hole punch GEKA type HYD 80 / Hydracrop 80/A Machine. No. 9566 Year of construction approx. 2000 Punching force 80 ton. throat 300 mm Punching up to Ø 40 mm in 14 mm sheet metal Flat material shears 450 x 15 mm Angle steel shears 130 x 130 x 13 mm Cjdpferz Tutex Abbjgn Square shears 45 x 45 mm Round material shears Ø 45 mm Rectangular notcher up to 12 mm Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Fence with el. stroke release 500 mm - Work table with stop for punching device 550 x 380 mm - Working height of the punching device 1100 mm - Work table with stop for the rectangular notcher 550 x 400 mm - Working height of rectangular notcher 930 mm - approx. 21 different punching tools - operating instructions - Original paint finish, not repainted Space requirement L x W x H 1800 x 1150 x 1950 mm Weight 1.7 tons. very good condition

Year of construction: 1988, condition: used, Voest Alpine DA 160 lathe year 1988 with three-jaw chuck , Multifix. , Ready for demonstration under power by arrangement. Cgsdema Snxepfx Abbjn

Condition: new, Year of construction: 2024, == Exhibition machine == ALZMETALL column drilling machine ALZSTAR 40 SV with coolant unit B (option 25) (consisting of separate tank (33l), pump with motor protection switch, complete fitting) and LED machine light Standard equipment: Mushroom pushbutton, reversing switch (for clockwise and anticlockwise rotation), motor protection switch Infinitely variable speed adjustment, digital speed display, feed overload protection, protection class IP54, connection plug Spindle protection with electrical fuse Technical data: Drilling capacity steel E335 (St 60) 40 mm Thread cutting: Steel E335 (St 60) M 24 Cast iron EN-GJL-200 (GG20) M 30 Short spindle MK 3 Spindle stroke 120 mm Projection 293 mm Column diameter 115 mm Machine table, usable support 514 x 360 mm T-slots, number x width x distance 2 x 14 x 224 mm Spindle-to-table distance min./max. 117/701 mm Feed rate 0.10 + 0.20 mm/rev Machine height without options approx. 1840 mm Coded Hy Elepfx Abbegn Net weight approx. 285 kg Drive stepless Motor 1500 / 3000 rpm Power 1.45 / 1.9 kW Spindle speed 160-2250 rpm

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, Hydraulic press brake PPBL 135/30 Year of construction 1990 Technical specifications Force 1350kN Working length 3050mm Distance between uprights 2250mm Stroke 110mm Distance table – ram 310mm Gap 200mm Width table 180mm Approach speed 100mm/s Working speed 8mm/s Return speed 65mm/s weight 6500 kg motor 7.5kW Cgedpfxew Hca Ho Abbon Voltage 3 x 380V Oil-tank 120L Options inlcuded; • Back gauge with 2 fingers • Range of back gauge 600mm • 2 front supports of 300mm • Table with center slot Tooling included with machine; • R10.180.78. 6x508mm • Multi-V M90 1x3050mm

Condition: new, Optimum OPTImill MZ 2S tool milling machine With digital 3-axis position display DP 700 from NEWALL. With inverter drive of the feed axes controllable from the control panel. Versatile application range Excellent damping characteristics and stability of the machine frame All guideways hardened and precision ground and adjustable by means of taper bars Automatic feed in X, Y and Z axes, infinitely adjustable via an electronic joystick on the control panel Electric feed limit stop Ball screw in all axes Central and clearly arranged control panel with integrated digital position and speed display Massive cross table, large dimensioned and precisely surface machined with 5 T-slots Coolant device Large dimensioned handwheels with scale Machine lamp Quiet running Manual central lubrication TECHNICAL DATA Dimensions and weights Length (product) approx. 1239mm width/depth (product) approx. 1168mm Height (product) approx. 1900mm weight (net) approx. 1400kg Drilling-milling head milling head swivel range ± 90 Drilling-milling capacity cutter head size max. 100mm drilling capacity steel (S235JR) 30mm Continuous drilling capacity steel (S235JR) 26mm End mill size max. 25mm Electrical data Power drive motor 2,2kW Supply voltage 400V Mains frequency 50Hz Horizontal milling table Horizontal milling table length 750mm Horizontal milling table width 320mm distance vertical spindle - horizontal milling table min. 75mm distance vertical spindle - horizontal milling table max. 410mm Horizontal milling table T-slots size 14mm Horizontal milling table T-slots number 5 Horizontal milling table T-slots distance 63mm Distance horizontal spindle - horizontal milling table min. 70mm Distance horizontal spindle - horizontal milling table max. 400mm Horizontal milling table load max. 285kg Milling table vertical Vertical milling table length 830mm Vertical milling table width 250mm Vertical milling table T-slots size 14mm Vertical milling table T-slots number 2 Vertical milling table T-slots distance 63mm Coolant system Coolant pump(s) Drive power 95W Travel Travel X-axis manual 400mm Travel Y-axis manual 200mm travel Z-axis manual 335mm Travel X-axis automatic approx. 310mm Travel Y-axis automaticapprox. 160mm Travel Z-axis automatic 295mm Vertical spindle Vertical spindle throat 100mm Vertical spindle Spindle mounting ISO 40 DIN 2080 Vertical spindle speed range 50 - 1890min¯¹ Vertical spindle number of speed ranges 12steps Vertical spindle tightening rod M 16 Cgsdpfx Aefnh Sgobbjn Vertical spindle quill stroke 120mm Vertical spindle load max. 1100Nm Feed speed Feed speed X-axis 10 - 600mm/min feed speed Y-axis 10 - 600mm/min feed speed Z-axis 10 - 600mm/min Electrical connection Total connected load 4kW Motor(s) rapid traverse X-axis power drive motor 0,375kW rapid traverse Y-axis power drive motor 0,375kW Rapid traverse Z-axis power drive motor 0.375kW SCOPE OF SUPPLY: Adapter ISO 40/MK3 adapter MK1 and MK 2 Milling spindle horizontal milling Ø 27 mm Operating tool

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm Codpjd N H A Nofx Abbegn weight of the saw approx. 1400 kg good condition

Year of construction: 2012, condition: excellent (used), Double-head saw with 3 controlled axes for aluminium, PVC, and light alloys, featuring automatic movement of the mobile head and electronic management of all angles from 45° (internal) to 15° (external), with precision up to 280 positions per degree. Cjdpfx Ajxqdu Debbogn

Condition: good (used), functionality: fully functional, Year of construction: 2008, operating hours: 41,804 h, used TRUMPF TruMatic 6000 (K01) – Medium format Technical data: Year of manufacture: 2008 Last maintenance: 18.03.2025 Operating hours NC: 41804 Resonator hours: 14466 Beam ON hours: 2054 Cgjdpfx Aowkd Efjbbjn Y-Axis: 1300 mm Additional equipment: various tools Recently installed new parts: Conversion to laser control TASC5 (01/2025) Control panel with display (01/2025) Box PC (01/2025) Hydraulic punching head/multilayer (10/2021)

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Universal milling machine Deckel FP2 repowered by FPS built in 2013 with 3-axis digital readout Heidenhain ND 780 As good as new !!! Technical data: >> Machine no. 2202-7020 FPS no. 3364 Year of construction 2013 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power .:2.2 KW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK- 40 >> Tightening system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> 3-axis digital readout Heidenhain ND 780 >> Brake motor with immediate spindle stop >> Central lubrication >> 2 x emergency stop >> Operating instructions >> Coolant device Cgsdpevbifgefx Abbsn To the machine : We offer a universal milling machine Deckel FP2 repowered by FPS in mint condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine has an electric central lubrication system. With two emergency stop switches for safety. Mechanically and electrically tested as of 2013. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out the lids under power on site. The machine is available immediately.