Bandsaw Weld Grinder

iDEAL SMP 120

Condition: used, Year of construction: 2008, functionality: fully functional, overall weight: 420 kg, iDEAL BAS 065-11 is a resistance butt welding machine for band saw blades, made in Germany by IDEAL-Werk C.+E. Jungeblodt GmbH + Co., Lippstadt. Serial no. 235529, year of manufacture 2008. Rated power 20 kVA at 50% duty cycle, primary voltage 400 V, 50/60 Hz, secondary voltage 2.5 – 4.0 V, maximum upsetting force 50 kN. Hydraulic clamping (the "-11" version): both clamping jaws are operated hydraulically by foot switch, so the operator keeps both hands free to position the blade. The hydraulic power unit with clamping pressure gauge is mounted on the machine. Welding current is selected with the step switch, flashing speed and annealing time are set on the front control panel, with a Panasonic timer for the annealing cycle. A flexible work light is fitted above the welding zone. Capacity: bi-metal band saw blades 10 x 0.7 – 41 x 1.6 mm, wood band saw blades 10 x 0.7 – 60 x 1.0 mm, stainless steel band saw blades 10 x 0.4 – 35 x 0.8 mm, band knives 10 x 0.4 – 40 x 0.8 mm, strip steel 7 – 100 mm2 cross-section (stainless up to 50 mm2), band thickness 0.4 – 2.5 mm, clamping width 60 mm. The machine is used, in working condition and repainted. Electrical cabinet, hydraulics and controls are shown in the photographs. Machine weight approx. 420 kg net / 480 kg gross, packing dimensions approx. 1150 x 1150 x 1150 mm. Make and Model: iDEAL BAS 065-11 Year of manufacture: 2008 Serial no.: 235529 Clamping: hydraulic, foot switch operation Max. upsetting force: 50 kN Voltage: 400 V Frequency: 50/60 Hz Power: 20 kVA (at 50% duty cycle) Secondary voltage: 2.5 – 4.0 V Fuse protection: 20 A Gedpfx Akszz Sdzsyjkc Bi-metal band saw blades: 10 × 0.7 – 41 × 1.6 mm Wood band saw blades: 10 × 0.7 – 60 × 1.0 mm Stainless steel band saw blades: 10 × 0.4 – 35 × 0.8 mm Band knives: 10 × 0.4 – 40 × 0.8 mm Strip steel, cross-section: 7 – 100 mm² (stainless up to 50 mm²) Band thickness: 0.4 – 2.5 mm Clamping width: 60 mm Machine weight: approx. 420 kg net / 480 kg gross Packing dimensions: approx. 1150 × 1150 × 1150 mm Condition: Used, in working order

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, total height: 1,500 mm, total width: 900 mm, total length: 1,400 mm, overall weight: 850 kg, IDEAL BAS 052 Ref. 38326 Band Saw Blade Welding Machine • 2012 • ID: 38326 IDEAL BAS052 is a band saw blade welding machine with 25 kVA power and operates at 400-440 V. It features UNIOP control. Flash butt welding of band saw blades from a UniOP control: that is the working arrangement on this BAS 052, year of manufacture 2012. The machine was repainted only, so it is presented as it came out of service rather than as a stripped and rebuilt unit. Clamping is hydraulic and annealing runs under pyrometer supervision with the temperature held automatically, which takes the heat treatment out of the operator's hands. Welding ranges Band saw blades for wood: 6-50 mm. Bi-metal bandsaw: 6-50 mm. Control and clamping UniOP process control. Annealing temperature held automatically. Annealing pyrometer. Clamping: pneumatic. Mass and footprint Around 500 kg, standing 1400*900*1500 mm over width, depth and height. Instructions and packing come with the machine. Gsdpfx Akjz D Hyyjyjkc With special Bandsaw pneumatic band insertion device for 10-25 mm width. Voltage 400-440 V Power 25 kVA Frequency 50-60 Hz Serial no. 239635 Year of manufacture 2012 Bandsaw blades welding widths From 6 to 50 mm possible, current setup is for blades from 10 to 25 mm wide.

Condition: new, Year of construction: 2023, load capacity: 3,000 kg, lifting height: 6,900 mm, total length: 5,920 mm, - Max. Tragkraft 3000 kg - Max. Hubhöhe 6.90 m - Maximale seitliche Reichweite 4 m - Kippwinkel 11 ° - Schüttwinkel 116 ° - Wenderadius (über Räder) 3.33 m - Getriebetyp Hydrostatisch - Standard Bereifung ALLIANCE 380/75 R20 148A8 A580 - Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 - Max. travel speed 24.90 km/h - Festellbremse Hydraulik - Lenkräder (vorne / hinten) 4 / 4 - Sicherheit Zulassung der Kabine Kabine ROPS - FOPS Stufe 2 - Heben 9.42 s - Senken 7.53 s - Teleskop ausfahren 7.43 s - Teleskop Einfahren 9.36 s - Ankippen 3.21 s - Auskippen 2.15 s - Motornorm Stage V - Motor Modell V3307-CR-TE5B - Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 3331 cm - Nennleistung Verbrennungsmotor - Leistung (kW) 55.92 kW / 54.60 kW - Max. Drehmoment / Motordrehzahl 265 Nm @ 1400 rpm - Zugkraft 3860 daN - Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 - Max. travel speed 24.90 km/h - Festellbremse Hydraulik - Pumpenart Zahnradpumpe - Hydraulikfördermenge / Hydraulikdruck 88 l/min / 245 bar - Motoröl 11 l Gkjdpfx Aoxd H Awokyec - Hydrauliköl 115 l - Fassungsvermögen des Kraftstofftanks 90 l - Geräuschpegel im Fahrerstand (LpA) 74 dB - Umgebungsgeräusch (LwA) 103 dB - Schwingungsbelastung Hand/Arm < 2.50 m/s² - Lenkräder (vorne / hinten) 4 / 4

Condition: used, functionality: fully functional, iDEAL SMP 100 Ref. 37926 Band Saw Blade Weld Grinding Machine Gkedpfxoz Hm Ivs Akyoc IDEAL SMP 100 weld seam grinding machine for band saw blades up to 100 mm width. Pneumatic blade clamping with foot pedal control, electric motor driven grinding wheel, adjustable depth stop. Built by IDEAL-Werk, Lippstadt, Germany. Make and model: IDEAL SMP 100 Machine type: Band saw blade weld seam grinding machine Serial no. 208035 Max. band width: 100 mm Blade clamping: Pneumatic, foot pedal operated Drive Electric: motor driven grinding wheel

Condition: used, Year of construction: 2015, Handles the full spectrum of blade types — bi-metal, carbide, wood, and stainless steel — up to 50 mm clamping width, covering blade dimensions from 6×0.40 mm up to 54×1.60 mm on bi-metal stock. At 25 kVA with 38 kN clamping force and 10 kN upsetting force, it delivers consistent, high-integrity welds across carbon and stainless steel strip with max. cross-sections of 150 mm² and 60 mm² respectively. The fully automatic welding and annealing cycle is recipe-controlled via touch panel — operator inserts the blade, hits start, and the machine handles the rest. Robust pneumatic clamping, water-cooled electrodes, and a 800 kg industrial frame make this a workhorse for sawmills, blade service centers, and large metalworking operations. Make and Model iDEAL BAS 320 Nominal output (50% DC) 25 kVA Secondary voltage 2.8 – 5.5 V (6 stages) Control voltage 24 DC Gedpfx Aoz Rkcaekyskc Clamping force 38 kN Upsetting force (max.) 10 kN Air pressure (min.) 6 bar Air consumption per cycle 52.6 Nl (at 6 bar) Cooling water consumption 4–5 l/min (20–25°C) Machine weight approx. 800 kg Dimensions W/D/H 1214 / 957 / 1982 mm Connection voltage 380–420 Bi-metallic / carbide bandsaws 6×0.40 – 54×1.60 Wood saw blades 6×0.40 – 50×1.10 Stainless steel saw blades 10×0.40 – 40×0.80 Strip blades 6×0.40 – 50×1.00 Steel strip S235JR max. 150 mm² Stainless steel max. 60 mm² Max. clamping width 50 mm