Wide belt sander

Heesemann HSM.3

Condition: used, mileage: 41,389 km, power: 95 kW (129.16 HP), first registration: 04/2014, fuel type: diesel, overall weight: 3,500 kg, color: blue, gearing type: automatic, emission class: euro5, number of seats: 2, Year of construction: 2014, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Refitting: Body/Superstructure: L1 Fresh Food Box Body, * Carrier XARIOS 300 refrigeration unit, * Standby cooling, * Dhollandia DHK 2.04 tail lift at the rear of the cargo area, * 1 row of anchor rails, * Ceiling light in the cargo area with door contact, Equipment: * Automatic transmission, * Air conditioning, * Driver's comfort suspension seat with heating, * Adjustable co-driver's seat, * Heat-insulating glazing, * Sliding door on the right with power assist, * Rear door (opening angle 270 degrees), * Metallic paint, * Tow hitch 2,000 kg with step, up to 3,500 kg possible for an extra charge. Technology: * Audio system Audio 15 (radio with color display), * Becker MAP Pilot navigation system, * Rear view camera, * Bluetools hands-free system, * Outside temperature display, * Electrically adjustable and heated exterior mirrors, Safety/Environment: * Airbag (driver's side), * Brake assist system, * Braking system with ABS+ASR, * Hill start assist, * Reinforced front stabilizer bar, * Rear stabilizer bar, * Low emissions according to Euro 5 emission standard, Other: * First delivery in Germany, * 2 previous owners, * Engine 2.1 L - 95 kW CDI CAT (2143 ccm), * Wheelbase 3250 mm, * Payload 1,150 kg according to registration certificate, * Permissible total weight 3.5 t, * Maintained according to Mercedes service schedule, * New technical inspection (TÜV) upon delivery Since 1972, your reliable partner for all things automotive/commercial vehicles in 28832 Achim, near the Bremen motorway junction. Behnke Commercial Vehicle Center always has approximately 200 vehicles available from the fields of vans, commercial vehicles and construction machinery! Dkedpslap S Aofx Akvsr We offer you attractive financing options at favorable special conditions. If you are interested, we will gladly prepare an individual offer for you! We would be happy to accept your commercial vehicle/construction machinery in part exchange. If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection. The delivery of your "new" commercial vehicle is possible through our external partners for an extra charge. The information provided in advertisements, on the internet, on price tags and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/guarantee for typing and data transmission errors. Listed equipment may need to be checked separately. Subject to errors and prior sale.

Condition: used, machine/vehicle number: 007926, Max. working width: 1300 mm Drying system: warm air Hot air: yes vertical baskets: yes Dedpfxjyhbkls Akvekr no. baskets: 48 panels / vertical chambers: yes no. panels / vertical chambers: 2

Condition: used, Year of construction: 2012, power: 110 kW (149.56 HP), Hargassner 110 kW – Biomass Boiler (Pellet / Wood Chip) – 2 Units Available, Cascade Operation Possible For sale is a Hargassner 110 kW fully automatic biomass boiler in a modern design (year of manufacture: 2012). ⚠️ 2 identical boilers available! ➡️ Ideal for cascade operation up to approx. 220 kW ➡️ High operational reliability and optimal performance modulation — Technical Data: • Year: 2012 • Output: 102–109 kW • Combustion output: up to 116.5 kW • Max. temperature: 95 °C • Max. pressure: 3 bar • Water volume: 190 liters • Weight: approx. 1010 kg — Key Features: • Fully automatic operation • Lambda sensor → automatic combustion control • Modulating output (demand-based adjustment) • Automatic cleaning and de-ashing • 3-pass boiler → high efficiency • Fireclay-lined combustion chamber → clean combustion • Automatic grate (self-cleaning) Dsdpfsy A Ei Nsx Akvskr • Very low power consumption (~0.18 kW) • Modern, energy-efficient system — Feeding Technology / Equipment: • Incl. feed auger (standard equipment) • Currently equipped with an automatic pellet suction system (vacuum system/suction feed) ➡️ Very simple pellet operation: • Connection to pellet storage via flexible hose • System automatically draws pellets into the boiler • Fully automatic operation without manual feeding ➡️ Optional: Can also be used for wood chip operation (by connecting to a discharge system) — Condition: • Recently dismantled • Was fully operational until dismantling — Inspection: Viewings are possible by appointment at our 1,500 m² warehouse in Mosonmagyaróvár, Hungary TOP HEATING SYSTEMS – Used Heating Systems, Boilers, Heat Pumps & Accessories Direct from Stock We are a family business with around 20 years of experience in heating technology, boasting a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a constantly available stock of approx. 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approx. 15 km from the Austrian border and about 80 km from Vienna. Mosonmagyaróvár is the first major city on the Hungarian side after the Austrian border. 🔥 Our inventory includes: • Wood chip boilers • Pellet boilers • Wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermal ventilators • Hot air blowers • Warm air heaters • Industrial heaters • Buffer tanks • Heat exchangers • Feed augers • Discharge systems • Burners • Pumps • Extensive heating accessories ⚙️ Accessories and Components: Additionally, we have a wide range of accessories, including circulation pumps, plate heat exchangers and many other components – from small-scale applications to industrial-scale solutions. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current Offers: Most of our current offers can be found on our website: topheatingsystems.com In addition, we have further units that are not yet listed. 📅 Inspection: A viewing at our warehouse is possible by prior appointment. If you are interested, please contact us – we will help you find the right solution.

Year of construction: 2006, condition: ready for operation (used), I sell the edge spraying automat with UV-drying and sanding units MAKOR GEMINI 56, Baujahr 2006. 2-Zone Vacuumpainting with self pumps system WITHOUT lost paint 2-Zone UV-drying 2 pcs. Edge sanding aggregates tiltable. Material is immediately dry and useable ! Dodpfx Ajim Eyxokvokr Very good condition. Available immediately. Possible to test.

Condition: excellent (used), Year of construction: 2015, operating hours: 10,000 h, functionality: fully functional, For sale: Ludy Machinery veneer joining machine with winding function. This machine is designed for efficient joining and stacking of veneer strips into a roll. Suitable for processing veneer in the production of plywood, laminated materials, and other woodworking applications. Robust construction, simple operation, and reduced material handling. Dksdpfxezg Dx Is Akver

Condition: good (used), working width: 1,350 mm, HESEEMANN LSM8 Dkjdpfx Asxcg Scekvsr

Year of construction: 1991, condition: used, machine/vehicle number: 575, - Manufacturer: Fladder - Model: Gyro 300 Vacuum - Working width: 1300 mm - Year of manufacture: 1991, good condition - Flex Trim sanding heads - Quick-change sanding media - Sanding media grit: K240 - Sanding media length: 45 mm with support brushes - Abrasive slits: 20 and 5 mm Dksdpfxjzia Nnj Akvsr - Number of brush heads: 6 - Rotating and oscillating sanding unit - Motor power: 5 kW - New frequency inverter for the conveyor belt - With vacuum conveyor belt - Feed rate: continuously adjustable from 2 to 8 m/min - Length: 2070 mm - Width: 2370 mm - Height: 2240 mm - Weight: 2300 kg - Location: In stock, D 32825 Blomberg - Volts, Hz: 400 / 50 - Can be tested in Blomberg

Condition: new, Year of construction: 2024, machine/vehicle number: 6913390001, hoku 113-90 – Solid tradesman compressors with V-belt drive and 2-cylinder high-performance unit made of gray cast iron The universal one with V-belt drive and high-quality equipment, especially suitable for tradesmen, for use where quality of compressed air as well as durability and efficiency are essential, long service life thanks to high-performance units with low speed, safe transport and excellent stability thanks to large wheels with parking brake, optimal cooling thanks to large fan wheel, aftercooler with cooling fins ensures a low boiler inlet temperature and thus less moisture in the compressed air, better efficiency thanks to optimized units, standard with Condor pressure switch, pressure gauge, pressure reducer with water separator and quick coupling, motor with overload protection Dsdjvl Euxjpfx Akvekr Technical data: Suction capacity 500 l/min., filling capacity 375 l/min., maximum pressure 10 bar, tank capacity 90 l, cylinders/stages 2/1, speed 1,300 min-1, engine power 3 kW / 400 V from the Seevetal location, without transport, as seen, subject to prior sale.

Year of construction: 2026, condition: new, CORMAK Compressed Air Dryer is a professional industrial device designed for effective removal of moisture, water vapour, and oil particles from compressed air systems. Using efficient refrigeration technology, the refrigerated air dryer ensures stable operation of pneumatic equipment, extending their service life and improving reliability. It is an ideal solution for companies looking for modern compressed air treatment methods in pneumatic installations. Main advantages of the CORMAK compressed air dryer Advanced refrigeration system — a two-stage air cooling process down to the dew point ensures effective separation of moisture and oil particles. Stable operation in systems up to 10 bar — the device is designed for use in standard industrial compressed air installations. High efficiency — capacity of up to 1500 l/min makes the dryer an effective solution for medium and larger compressed air systems. Energy-saving design — the use of a variable-speed fan reduces power consumption to only 0.58 kW. Automatic condensate drain valve — ensures reliable removal of condensate without the need for operator supervision. Compact dimensions and easy installation — ideal for upgrading existing compressed air systems. Safe R134a refrigerant — provides high operating efficiency while meeting modern environmental standards. Design and technology The refrigerated compressed air dryer has been designed for maximum efficiency and long-term durability. Its main components include: 1. Air-to-air heat exchanger During the first stage, incoming compressed air passes through a heat exchanger, where it is pre-cooled by the colder air leaving the evaporator. The counterflow design improves heat recovery and increases the overall energy efficiency of the system. 2. Refrigeration system evaporator In the second stage, compressed air enters the evaporator, where it is cooled to a dew point temperature of 3°C. This process causes water vapour and oil particles contained in the air to condense. 3. Condensate separator After cooling, the mixture of air and condensate enters a high-efficiency separator, where condensed water and oil are separated and automatically discharged outside the unit. 4. Fan control system The variable-speed fan technology automatically adjusts cooling intensity according to actual operating conditions. This reduces energy consumption and extends the service life of the components. Accuracy and operating efficiency The CORMAK refrigerated air dryer provides stable parameters and reliable operation in industrial compressed air systems. Effective moisture removal protects pneumatic tools and machinery from corrosion, failures, and reduced performance caused by contaminated air. Dodpfxomt Dbhj Akvokr Equipment included Automatic condensate drain valve Integrated water and oil separator Variable-speed fan with automatic adjustment to operating conditions Electronic control system ensuring stable operation parameters Compact and durable housing resistant to industrial environments Technical specifications Parameter Value Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Capacity 1500 l/min Power consumption 0.58 kW Supply voltage 230 V Dimensions (L × W × H) 380 × 600 × 625 mm Weight 31 kg Refrigerant type and quantity R134a, 400 g

Condition: excellent (used), functionality: fully functional, grinding width: 1,350 mm, overall weight: 5,500 kg, working height: 880 mm, Wide-belt sanding machine with transverse and longitudinal sanding units for sanding, among other things, veneer before painting. The machine is fully functional, well-maintained, and in very good technical condition. Dkedpfjya I Riox Akvjr The conveyor belt has been renewed. Sanding width: 1300 mm Working height: 880 mm (constant) Workpiece thickness: max. 3-140 mm Conveyor bed: with individual conveyor belts Drive: 3.0 kW three-phase motor, incl. dust extraction system Feed speed: 4.5-22 m/min (adjustable) Sanding units: transverse/longitudinal/brush Brush roller unit: centrally adjustable in height Diameter: 150 mm Drive power: 1.5 kW Bristle material: fiber 1. Transverse sanding unit: fail-safe braking system, pneumatic belt tension, belt monitoring, pressure pad belt system, intermittent belt extraction, sanding belt dimensions: 4900 x 150 mm, belt sanding speed: 12 + 24 m/s, drive power: 13 / 17 kW 2. Longitudinal sanding unit: stepless, electronic control of the sanding belt speed via a frequency converter, fail-safe braking system, pneumatic belt tension, intermittent belt extraction, infrared belt control, sanding belt running in the opposite direction, sanding belt dimensions: 2620 x 1350 mm, belt sanding speed: 0.3 – 12 m/s, drive power: 11 kW Graphical operator terminal for entering machine setting values, incl. numerical thickness adjustment and display of fault sources, workpiece throughput, and feed speed. Electronically controlled pressure bar. Distance between guide rollers: 40 mm Pneumatic belt tension. The contact surfaces of the pressure bar automatically adjust to the shape of the workpiece. Weight: approx. 5500 kg Space requirement: approx. 2550 x 2675 x 2400 mm