Used Heesemann Wide Belt Sander for sale (13,783)

Condition: used, Year of construction: 1993, functionality: fully functional, grinding width: 1,350 mm, grinding height: 150 mm, working height: 150 mm, height adjustment type: electric, workpiece height (max.): 150 mm, - Very good condition - Year of manufacture: 1993 - Electronic PLC control: Heesemann - Model / Type: LSM 6 TECHNICAL PARAMETERS: - Working sanding width: 1350 mm - Max. thickness of workpieces: 150 mm MACHINE CONFIGURATION: I – Cross sanding unit (sergeant type) with sequential electronic pressure - Main motor: 13 kW - Pneumatic photo sensor oscillation - Extraction port: 1 x 180 mm - Sanding belt size: 5480 x 150 mm II – Combination unit with pad - Main motor: 13 kW - Belt cleaning system with oscillation - Pneumatic pad pressure - Pneumatic photo sensor oscillation - Extraction port: 1 x 180 mm - Sanding belt size: 2620 x 1350 mm - PNEUMATIC PHOTO SENSOR OSCILLATION - Pneumatic bar cleaning system with oscillation for cleaning belts III – Combination unit with pad - Main motor: 13 kW - Sanding belt cleaning system - Pneumatic pad pressure - Extraction port: 1 x 180 mm - Sanding belt size: 2620 x 1350 mm IV – Cleaning brush unit for workpiece behind the main unit at the outfeed - Motor: 1.1 kW - Extraction port: 1 x 140 mm - Feed regulated by gear motor: 4 kW feed motor Rjdpfsw H Sk Tsx Ahgecf - Feed speed: 6–26 m/min - Air requirement: approx. 28 m/sec, 4340 m³/h - Compressed air consumption: approx. 800 l/min - Feed belt: 5-segment - Pneumatic feed belt cleaning system - Automatic sanding height adjustment with electronic display - Motor: 0.55 kW - Suitable for sanding lacquer and intermediate sanding between coats - Dimensions (LxWxH): 3750 x 3230 x 2300 mm - Weight: approx. 8000 kg

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 0-256-73-1249, working width: 1,350 mm, grinding belt length: 2,150 mm, workpiece height (max.): 160 mm, grinding belt width: 1,370 mm, volume flow: 3,660 m³/h, TECHNICAL DETAILS Working width: 1,350 mm Workpiece thickness: min. 3 mm / max. 160 mm Sanding belt width: 1,370 mm Sanding belt length: 2,150 mm Unit 1 – Contact cylinder Sanding belt cutting speed: 18 m/s Rjdezvnfwjpfx Ahgecf Rubber cylinder: 65° Cylinder diameter: 240 mm Combination sanding unit Sanding belt speed: 12 m/min Rubber cylinder: 55° Shore Cylinder diameter: 140 mm Width of pneumatic foot: 80 mm MACHINE DETAILS Voltage: 400 V / 50 Hz Drive power Unit 1: 15 kW Drive power Unit 2: 15 kW Total power consumption: 33 kW Dust extraction connection Unit 1: Ø 180 mm Dust extraction connection Unit 2: Ø 180 mm Dust extraction volume: 3,660 m³/h Recommended dust extraction speed: 20 m/s Compressed air requirement: 20 l/min at 6 bar EQUIPMENT Sanding belt change on the left side Automatic clamping of the contact cylinder, e.g., during belt change Automatically adjustable rubber cylinder Grain size compensation on the contact cylinder Combination sanding unit L with pneumatic foot for calibration Automatic anchoring/fastening Grain size compensation on the rubber cylinder Automatically adjustable pneumatic foot

Condition: excellent (used), Catalogue No.: 7810 TECHNICAL DATA max working width: 630 mm max working height: 110 mm 2 units: 1) grooved rubber roller for calibration 2) grooved rubber roller for calibration + pad + metal roller *from above: metal feed-in slip roller unit metal slip roller unit metal slip roller *from below: 2 metal slip rollers feed belt 2 metal slip rollers pneumatic belt oscillation 2 feed speeds motor: 2×7.5 kW electric table elevation operating pressure: 6-8 bar extraction port diameter: 2x160 mm overall dimensions (L/W/H): 1650x1060x1970 mm weight: 972 kg – Polish manufacture – 2 units Rcodpfx Aozxhihehgof – unpainted – very good condition – used sander Net price: 25,900 PLN Net price: 6,160 EUR (at exchange rate 4.2 EUR) (Prices may fluctuate with significant currency changes)

Condition: excellent (used), CATALOGUE NUMBER 8032 TECHNICAL DATA - max. width of the workpiece: 970mm - max. height of the workpiece: 160mm - 2 units - 1) ribbed rubber roller - 2) two metal rollers + shoe - motor power of unit I and II: 11kW - total power: 12kW - brake * from above: - metal roller, slip - pressure roller - unit - metal roller, slip - pressure roller - unit - metal roller, slip * from below: - rubber roller, slip - conveyor belt - pneumatic belt oscillation - electric table lifting - 2 feed speed settings - feed motor approx. 0.75kW - working pressure: 8-10 bar - diameter of the extraction nozzle: 2x160mm - overall dimensions (L/W/H): 1600x1500x2000mm - weight: 1370kg ADVANTAGES Rcodpfxezxg H Sj Ahgjf - Made in Italy - 2 units - Unpainted - Used sander, very good condition Net price: 21900 PLN Net price: 5200 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary with higher fluctuations)

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 99.125.681, working width: 1,100 mm, overall weight: 2,500 kg, grinding belt length: 1,890 mm, grinding belt width: 1,110 mm, Equipment: CE marking, TECHNICAL DETAILS Number of units: 2 Unit 1 Position: Top Unit type: Contact roller Sanding belt length: 1,890 mm Sanding belt width: 1,110 mm Roller diameter: 175 mm Roller material: Rubber Motor power: 18.5 kW Unit 2 Position: Top Unit type: Contact roller Sanding belt length: 1,890 mm Sanding belt width: 1,110 mm Roller diameter: 175 mm Roller material: Rubber Motor power: 18.5 kW Max. working width: 1,100 mm Min. working height: 30 mm Max. working height: 183 mm Infeed table length: 400 mm Outfeed table length: 250 mm MACHINE DETAILS Feed motor power: 0.75 kW Voltage: 380 V Current consumption: 36 A Fusing: 63 A Dimensions & Weight Dimensions (L x W x H): 1,700 x 1,800 x 2,320 mm Unladen weight: 2,500 kg Number of transport packages: 1 EQUIPMENT Rcodpfx Ahszxcmzjgef CE marking

Condition: used, Year of construction: 1986, Max. working width: 1300 mm Number of belts: 3-belt 1st unit: Shoe unit 1st roller diameter: 100 1st unit design: steel roller/shoe 2nd unit: roller/shoe 2nd roller diameter: 100 2nd unit design: steel roller 3rd unit: roller/shoe 3rd roller diameter: 100 mm 3rd roller design: grooved steel roller 3rd unit sanding shoe: electronic individual elements Cleaning brushes: Yes Paint sanding possible: Yes Belt blow-off: Yes Vacuum carpet: Yes Rodpfx Ahsvvki Negjcf Storage location: Nattheim

Condition: used, Year of construction: 1997, Number of belts: 1 belt, max. clearance height: 150 mm, max. working width: 1100 mm. 1st unit: Combination unit. 1st roller diameter: Steel roller. 1st unit design: Roller/shoe unit. 1st sanding shoe design: Electronic individual links. Segment width: 50 mm. 1st sanding belt length: 1900 mm. 1st sanding belt width: 1120 mm. Motor: 1 kW. Feed speed: 4 and 8 m/min. 2nd unit: Dust brush. Approx. weight: 2000 kg. Dimensions: 1800 x 1450 x 2120 mm. Rcodpevvkkaofx Ahgjf Storage location: Nattheim

Condition: used, Bütfering ECO 111 Electronic Wide-Belt Calibration and Fine Sanders Contact roller unit 85 SH CPS electronically controlled segmented pad Working width 1100 mm Terminal for various operating programs with selector switch and LED display Motor power approx. 11 kW Brush cleaning unit RTE additional compact roller table at infeed RTA additional compact roller table at outfeed Machine is FULLY REFURBISHED and in TOP CONDITION Available ex-stock Lieboch Rsdoy Rzf Ajpfx Ahgocf

Condition: used, OTT MEGAtronic 11 Lacquer Wide-Belt Calibration and Fine Sanding Machine 1st sanding unit: calibration roller, diameter 150 mm, 90° Shore 2nd sanding unit: electronically controlled, segmented membrane sanding pad Working width: 1100 mm MEGA – Lacquer sanding package Feed speed steplessly adjustable: 3–15 m/min Motor power, 1st sanding unit: 11 kW Motor power, 2nd sanding unit: 11 kW, with 2nd belt speed of 4.5 m/sec Additional special equipment: Rcjdpfx Ahozi A R Iogof Vacuum table Vacuum generator 3 kW Abrasive belt oscillation Rigid sanding shoe for solid wood and frame sanding Machine is WORKSHOP-OVERHAULED, in TOP CONDITION, from a crafts business Available from stock in Lieboch

Condition: used, For sale: ENORM PRIMO – TOP CONSTANT THICKNESS MACHINE / automatic head positioning Wide-belt calibrating and fine-finishing machine Rjdpfsznbnvjx Ahgecf Combined unit: contact roller and pneumatic sanding pad Enormatic Digital thickness display for workpiece thickness Belt drive motor power approx. 9 kW Contact roller pressure adjustable in infinitely variable steps according to grit scale Infeed and outfeed table with roller support Working width 1100 mm Feed rate 2.5 - 15 m/min Machine is WORKSHOP OVERHAULED and in VERY GOOD CONDITION Machine comes from a craft business Available from stock in Lieboch

Condition: excellent (used), CATALOGUE NUMBER: 6145 TECHNICAL DATA - max. width of the workpiece: 1100mm - max. height of the workpiece: 140mm 3 units: 1) grooved rubber roller for calibrating, 15kW 2) grooved rubber roller for calibrating, 11kW 3) grooved rubber roller for calibrating, 11kW Top: - sliding metal roller Rcedpjzw Dtmjfx Ahgof - sliding rubber roller - unit - 2 sliding rubber rollers - unit - 2 sliding rubber rollers - unit - sliding rubber roller Bottom: - feeding table, 3600x1000mm - feed speed adjustable via frequency inverter, 0.25kW - conveyor belt - 3 sliding rubber rollers, guiding - pneumatic belt oscillation with photoelectric sensors - belt blowing - electric table lifting - lifting motor 0.75kW - stepless feed speed adjustment - feed motor 2.2kW - with vacuum pump - pump motor 4kW - extraction nozzle diameter 110mm, 80mm - working pressure 6-8 bar - extraction nozzle diameter 3x150, 3x200mm - overall machine dimensions (L/W/H): 3400x2300x2800mm - feeder dimensions (L/W/H): 3000x1300x900mm - pump dimensions (L/W/H): 600x950x940mm - weight approx. 5000kg Net price: 32900 PLN Net price: 7833 EUR, depending on the exchange rate of 4.2 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), Catalog number 7431 TECHNICAL DATA - max. width of the workpiece: 950 mm - max. height of the workpiece: 150 mm From above: - metal roller, pressure roller Rcjdpjzw Dibsfx Ahgof - unit (fluted rubber roller for calibrating + shoe + metal roller) - metal roller, smooth, sliding roller From below: - conveyor belt - pneumatic belt oscillation with photocells - electric table lifting - 2 types of feed speed - main motor: 7.5 kW - feed motor: 0.6 kW - table lifting motor: 0.18 kW - working pressure: 8 bar - diameter of the dust extraction nozzle: 150 mm - dimensions (L/W/H): 1600x1250x2000 mm - weight: 1109 kg ADVANTAGES - German production - additional shoe included - used grinder, very good condition Net price: 19,900 PLN Net price: 4,738 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 6582 TECHNICAL DATA - max. width of workpiece: 920 mm - max. height of workpiece: 150 mm 2 units: 1) grooved rubber roller for calibrating, 11 kW 2) grooved rubber roller for calibrating + tape blowing, 7.5 kW From above: - 2 slip rubber rollers - unit - 2 slip rubber rollers - unit Rsdpfx Ahjzw Dchsgecf - 2 slip rubber rollers From below: - 3 slip rubber rollers - conveyor belt - pneumatic tape oscillation - electric table lifting - stepless feed speed adjustment - working pressure 8-10 bar - pneumatic brake - diameter of extraction nozzle: 2 x 160 mm - overall dimensions (L/W/H): 1600 x 1460 x 2000 mm - weight: approx. 1305 kg – German made – 2 units – used grinder, very good condition Net price: 24,900 PLN Net price: 5,929 EUR Net price calculated according to the exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd unit: Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. Rjdpfx Aheudxchsgecf - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration Roller, Steel 2nd Unit: Combination Unit (Roller 60 Shore, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Main motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front and rear Sanding pad inserts fitted with new graphite cloth Including as-new sanding belts All documentation included Note for used machinery: • Specifications, data, and prior sale are subject to change. • Prices stated are ex works – free loaded! • The machine has been cleaned and functionality tested. • All machines are sold as seen without any rights to warranty. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!) Rsdpfxexqggce Ahgscf

Condition: excellent (used), Year of construction: 1992, Wide Belt Sander VIET Target 211 A Calibration and fine sanding machine with 2 sanding units and one motor, sanding from above Working width: 1100 mm Abrasive belt dimensions: 2200 x 1130 mm Workpiece dimensions: 4 – 160 mm Motor for table height adjustment: 0.18 kW, 400 V, 50 Hz Main motor: 8.0 kW, 400 V, 50 Hz 2 feed speeds 1st unit: Rubber-coated sanding roller, 90 Sh, 2nd unit: Fixed sanding pad & air cushion sanding pad, timer controlled Compressed air requirement: approx. 6 bar Extraction connection diameter: 2 x 150 mm Approx. dimensions (L x W x H): 1700 x 1750 x 1800 mm Weight: approx. 1,400 kg Automatic workpiece thickness adjustment with digital display Workpiece thickness adjustment via foot pedal Automatic conveyor belt centering Abrasive belt oscillation Abrasive belt (emergency) stop with disc brakes Table extension with 2 rollers at infeed and outfeed Emergency stop Main switch CE compliant INCLUDES many sanding belts INCLUDES 2 pcs newly covered graphite sanding pad inserts NEW bearings for return rollers NEW drive belts for the motor Rcjdpfjy Exhwjx Ahgof Note on used machinery: • Errors in technical specifications and prior sale excepted. • Stated prices are ex works - free loading! • Machines have been cleaned and tested for functionality. • All machines are sold as inspected, without any claim to warranty. Buyers are welcome to inspect the machines on site. • Special arrangements are only possible in writing. (Enquiries are only answered if you provide your address and telephone number!)

Condition: excellent (used), Working width: 1,360 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,360 x 1,900 mm Variable feed speed: 7 - 14 m/min Rodpfoych Igox Ahgecf Feed motor power: 1.1 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 2,160 x 2,260 x 2,025 mm Weight: approx. 2,200 kg 1st unit: Steel contact roller Motor power: 15 kW, 400 V, 50 Hz 2nd unit: Sanding pad, rigid for fine sanding of solid wood & pneumatically controlled (timed) for veneer sanding 3rd unit: Cleaning brush Abrasive belt oscillation with selector switch Feed conveyor oscillation pneumatic Motorized workpiece thickness adjustment with LED display Units equipped with emergency brake device Emergency stop button at infeed Roller table extension at infeed Complete documentation included Note – Used machines: • Subject to technical changes and prior sale. • Prices quoted are ex location – loaded on truck! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, with no warranty or guarantee. Buyers are free to inspect the machines at the site. • Special agreements are only valid in writing. (We will only respond to inquiries that include your address and telephone number!)

Condition: excellent (used), Wide belt sander for calibration and fine sanding Working width 1100 mm Min. / max. workpiece height 3 - 120 mm Feed motor power 0.8 kW Sanding belt speed 18 m/sec Sanding belt dimensions 1115 x 2620 mm Feed speed 4.5 / 9 m/ min Suction connection 3 x 160 mm Compressed air connection 6 bar 1st unit Sanding roller rubber-coated 90 Sh Motor power 11 kW 2nd unit Combi unit Rubber-coated sanding drum 60 Sh Sanding pad, rigid Motor power 11 kW 3. cleaning brush unit Automatic workpiece thickness adjustment at infeed with digital workpiece thickness display Table extension in the outfeed Rjdpfxetwzyfs Ahgjcf Dimensions approx. L x W x H = 2291 x 1784 x 2350 mm Weight approx. 3000 kg Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Year of construction: 2008, Working width: 1100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 - 13 m/min Feed motor output: 1.10 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 1705 x 1545 x 1905 mm 1st unit: Steel contact roller, diameter 160 mm Motor output: 15 kW, 400 V, 50 Hz Rcedpfsychqzjx Ahgof 2nd unit: Combination unit with rubber-coated contact roller (Sh 65), rigid sanding shoe Motor output: 11 kW, 400 V, 50 Hz Abrasive belt cleaning via compressed air 3rd unit: Cleaning brush Multi-function display Multi-function lever (conveyor belt, workpiece thickness adjustment) Electronic belt oscillation Pneumatic conveyor carpet oscillation Motorized workpiece thickness adjustment with LED display in 0.1 mm increments Units with emergency braking system Emergency stop button at infeed & outfeed Motor protection switch Roller table extension at infeed with 2 loose rollers Automatic star/delta start Complete documentation Note for used machines: • Specifications and prior sale subject to change. • Stated prices are ex works – loaded free of charge! • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machine on site. • Special agreements are only possible in written form. (We only respond to inquiries providing your address and telephone number!)

Condition: excellent (used), CATALOGUE NUMBER 8037 TECHNICAL DATA - Max. width of the workpiece: 1100 mm - Max. height of the workpiece: 160 mm 2 units: 1) Metal, grooved roller for calibrating 2) Rubber, grooved roller + pneumatic sequential apron + metal roller - Motor power: 15 kW - Brake - Top: - Rubber roller, slip, split - Unit - Rubber roller, slip, split - Unit with apron - Rubber, slip, split output roller - Bottom: - 2 metal rollers, slip - Conveyor belt - 2 metal rollers, slip, output - Pneumatic belt oscillation with photocell - Electric table lifting - 2 feed speed types - Feed motor: 0.45 kW / 0.8 kW - Grinding thickness potentiometer - Working pressure: 8-10 bar - Diameter of dust extraction nozzle: 2 x 160 mm - Overall dimensions (L/W/H): 1900 x 1700 x 2000 mm Rsdpfx Ahszmh U Hogecf - Weight: 1413 kg ADVANTAGES - Made in Italy, SCM brand - 2 units - Grinding thickness potentiometer - Pneumatic sequential apron - Not painted - DTR documentation - Used sander, very good condition Net price: 32,900 PLN Net price: 7,830 EUR Net price calculated based on an exchange rate of 4.2 PLN/EUR (the price may change in the event of significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7910 TECHNICAL DATA - Max. working width: 1350mm - Max. working height: 150mm – From above: - Rubber pressure roller I unit (metal grooved roller for calibration) II unit (two smooth metal rollers + sequential sanding pad) - Rubber pressure roller - Cleaning brush – From below: - Infeed roller, metal - Feed belt - Outfeed roller, metal, slip type - Pneumatic belt oscillation with photocell control - Electric table lifting - 2 feed speeds: 2–14m/min - Main motor: 5.5/15 kW - Brake - Grinding height potentiometer - Feed motor: 0.75kW - Working pressure: 8 bar - Extraction nozzle diameter: 200mm, 120mm - Dimensions (L/W/H): 1860x2200x1980mm - Weight: 1995kg ADVANTAGES – German-made – Unpainted – DTR technical documentation included – Used sander, in very good condition Redpfx Aoy T Ip Tehgscf Net price: 38,900 PLN Net price: 9,260 EUR based on 4.2 EUR rate (Prices may change with significant rate fluctuations)

Condition: used, Year of construction: 2002, Grinding width: 1350 mm Belt width: 1370 mm Belt length: 1900 mm Rjdpfx Ahjzwm Hcsgjcf Workpiece thickness: 3 - 150 mm Feed rate: 2.5 - 13 m/min (infinitely adjustable) Belt blowing system Dust brush Drives: Grinding unit: 15 kW Total connected load: 17 kW Weight: approx. 2400 kg Dimensions: 2000 x 1850 x 2100 mm Location: Nattheim

Condition: used, Year of construction: 1991, Working width 1100 mm Number of sanding units 2 st. Used Machine Year of Manufacture: 1991 Condition: Machine fully serviced and inspected Features and Technical Specifications: - Working width: 1100 mm - Working height: 140 mm - Height adjustment: electric - Workpiece thickness display: digital - Units: 2 - 1st unit: Combination unit (roller - shoe) with electronic segmented shoe - 2nd unit: Shoe unit, with electronic segmented shoe - With vacuum conveyor belt - Dust removal brush: yes - Motor power: 2 x 15 kW - Current consumption: 65 A Redozwg Tpspfx Ahgscf - Exhaust connection: 4 x 200 mm - Sanding belts: 1120 x 1900 mm - Dimensions: 2300 x 1900 x 2500 mm - Weight: 3500 kg

Condition: used, Year of construction: 1976, Working width 1350 mm Number of sanding units x st. Second-hand machine Year of manufacture: 1976 Features and technical specifications: - grinding from below - Material feed via rubber rollers - Non-contact control of oscillation - Quick-change pressure bar - Electric motor-driven adjustment of tool thickness with an easy-to-read display Digital display Rcsdpfozk Nyrex Ahgsf - Push-button control with contactor control - Sanding width 1350 mm - Maximum workpiece thickness: 150 mm - Sanding belt width 1360 mm - Sanding belt length 1900 mm - Roller feed speed switchable between 10 and 20 m/min - Compressed air connection: 6 bar - Air consumption approx. 180 NL/min Motor power 17.5 kW Dimensions W x D x H 1800 x 1100 x 1520 mm Weight: 2,600 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 1998, Working width 1350 mm Number of sanding units x st. Second-hand machine Year of manufacture: 1998 1 automatic belt sander with combination unit with electronic articulated pressure beam For sanding soft and hard veneers Calibration and fine sanding of solid wood Calibration of workpiece carrier plates Sanding off defective veneers and coatings Intermediate sanding of PU, hydro, UV, nitro and polyester coatings Grinding of barrier films with graphical operator terminal NC-controlled thickness adjustment from 3–150 mm Activation of the calibration roller via terminal With patented CSD articulated pressure beam for compensating for workpiece tolerances of up to 2 mm Grinding width 1350 mm Grinding belt length: 2150 mm Rcodpfx Aszk Nxzjhgof Grinding belt speed, frequency-controlled: approx. 2–18 m/sec Grinding unit drive: 15 kW Feed speed: 5/10 m/min Compressed air: 6 bar Compressed air requirement: 15 NL/min with belt discharge 490 l/min Extraction connection: 180 mm Air requirement for grinding unit: 1,800 m³/h Required air velocity: 20 m/sec Total power requirement approx. 17 kW Weight approx. 2,500 kg Dimensions WxDxH 2090x1670x2020 mm The machine is yet to be fitted with a new pre-lift belt Availability: by arrangement Storage location: Röllbach