Multi-blade edging saw

Trademak SQUALO 515 LM

Year of construction: 2014, condition: good (used), functionality: fully functional, machine/vehicle number: 231890, Timber drying kiln MÜHLBÖCK, complete with heat recovery system, model 1306. Depth: 4x120 cm, height: 3x120 cm, timber length: 5.20 m. Heating capacity: 225 kW. Flow temperature: 90°C. Water volume: 13 m³/h. Electrical connection power: 20 kW. Fans: 3x3.0 kW and 2x4.0 kW. Complete with control container.\n\nAdditionally, timber drying kiln VANICEK VF522/2D, year of manufacture 2000, complete. Heating capacity: 174 kW. Water temperature: 80/70°C. Water volume: 15 m³/h. Electrical connection power: 4.4 kW. Fans: 4x1.1 kW.\n\nBoth drying kilns must be dismantled by the buyer as soon as possible. Kodpov Habiefx Adqend

Condition: used, Year of construction: 1989, machine/vehicle number: 1025, arm reach: 13,300 mm, load capacity: 2,300 kg, track width: 3,000 mm, Equipment: cabin, crane, Year of manufacture: 1989 (factory overhaul 2007) Machine number: 1025 Track, m: 3.0 Crane type: OBX IV (year of manufacture 2007) Reach: 13.3 m Knodpfxsv Ddtke Adqed Load capacity without grab: 2,300 kg / 13.0 m Grapple: included Crane arrangement: behind the cabin Cab side: left Saw: 1.3 m Alpha Measurement: dividing aid with 2-level measurement Year of manufacture 2007 !! Sold on behalf of the customer!! Available from April 2025

Condition: new, cutting width max. 310 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW Speed 2.800 U/min. Required air-pressure 6-8 bar Working height 900 +/- 20 mm Dimensions (L/W/H) 10645x1000x1300 mm SALVAMAC COMBO 500 – The semi-automatic miter saw with SALVASTOP 100 - electronic length stop/slider ----- - Pos. 1: Legend 500 under table miter saw ----- - Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards that are on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced full-surface painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Motor power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balancing and longevity. Shock absorbing system. Kodpfxjvu Hd Tj Adqjnd Independent pneumatic adjustment options to adapt to different types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using new ball bearings with double dust protection and automatic lubrication system. CE compliant electrical system. The CE models must come standard with at least 1 meter long support plates at the inlet and outlet. Technical specifications: ----- Saw cross-section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 7 Nl Intake manifold: 1 - 120 mm / 1 - 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50Hz 3-phase Worktop height: 900 mm +- 20 mm Colour: Ral 7035 - Ral 1007 Pos. 2: Salvastop 100 electronic length stop ----- - - Working method: 2 modes 1 x stop (length stop moves to the specified length) and 1 x slide (several lengths are processed one after the other at the push of a button) - with servo drive - Ram speed: up to 60 m/min - slider length 600 mm - with a 7'' touch display - maximum weight of logs that can be pushed - up to 100 kg - USB connection COMBO_500 - 6400/7000 - Roller conveyor with guide to the right of the saw. Painted steel frame with galvanized castors. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm. 3 m. - 6400/7000 SalvaStop 100 to the left of the saw. Working length 6.4 m. Total length 7.0 m. With table top 7 m. Width 320 mm. Demonstration machine additionally equipped with: UP & DOWN FRONT PROTECTION Movable instead of rigid front protection. The guard rises during cutting to ensure safe working conditions. Loading and unloading wood is simplified with the downward-facing guard. The system has another special, secured pneumatic system with linear guidance, which impresses with top quality and cutting-edge technology. SOFTWARE LINK FILES Preparation for data import via a Salvamac file template in CSV format. ----- Total price demonstration machine from stock 73447 Oberkochen: on request! ----- More options like longer/shorter inlet/outlet, Stop systems on re...

Condition: used, Year of construction: 2003, High performance planer Weinig type Hydromat 23 Planing and moulding machine Weinig Hydromat 23 for four-sided planing and moulding of wood with feed rate up to 100 m/min. Original data of the machine, technical modifications reserved. Knjdpfx Adeup Av Djqsd - spindles: 8 - Spindle arrangement: 1. bottom 18,5 kW // 6.000 rpm // flight circle 125 - 180 mm // counter bearing 2. right 22 kW // 6.000 rpm // flight circle 112 - 250 mm 3. left (22 kW) // 6.000 rpm // flight circle 112 - 250 mm 4. top (22 kW) + chamfering unit // 6.000 rpm // flight circle 112 - 250 mm // counter bearing 5. bottom (15 kW) // 6.000 rpm // flight circle 112 - 250 mm // counter bearing 6. top (22 kW) // 6.000 rpm // flight circle 112 - 250 mm // counter bearing 7. bottom (15 kW) // 6.000 rpm // flight circle 112 - 250 mm // counter bearing 8. universal (11 kW) // 6.000 rpm // flight circle 112 - 200 mm - Spindle diameter: 50 mm - Working width: 20 - 230 mm - Working height: 12 - 160 mm - Feed 22 kW // approx.: 8 - 100 m/min - Year of manufacture: 2003 - ATS system - Drive for horizontal spindles via toothed belts - 5 driven rollers in the table - Air cushion system in the machine table - Short infeed table with driven 4 rollers - 400 V // 50 Hz

Condition: like new (used), WEINIG Hydromat H30N, S/N 253-886, year 1991, 9 spindles Hydromat H30 with short infeed table and heavy 6-roller infeed - Working width max. 300 mm - Working height max. 140 mm - Electronic feed infinitely variable 12 - 120 m/min. - Feed motor 22.0 KW - 1st spindle bottom 11.0 KW - 2nd spindle right 11.0 KW - 3rd spindle left 15.0 KW - 4th spindle left 11.0 KW - 5. spindle right 11.0 KW - 6. spindle top 22.0 KW - 7. spindle bottom 30.0 KW - 8. spindle top 11.0 KW - 9. spindle bottom 11.0 KW - All spindle motors with electronic brake - COMPLETELY NEW MILLING SPINDLES - Spindle diameter ø 50 mm - Spindle speed 6,000 rpm. - 6 driven rollers in the table - hard chrome plated - Spindle 1 + 6 + 7 + 8 + 9 with NEW counter bearing - Hydraulic counter bearing clamping - Spindle 2 + 3 + 8 + 9 with straight jinter - Spindle 4 + 6 pneumatic pressure - NEW feed rollers D=170 mm - Hard chrome-plated table tops - Hard chrome plated stops Knedpfetynpxjx Adqsd - - Heavy pressure rollers from above - pneumatic - Heavy pressure rollers from the side - pneumatic - Automatic table lubrication - NEW - Central position of the lubrication points - NEW control panel free-standing, 5m cable - NEW free-standing control cabinet, 5m cable - Operating instructions, spare parts list and wiring diagram + Many NEW spare parts / accessories. Dimension: - Total length approx. 6,150 mm - Total width approx. 2,160 mm - Machine weight approx. 9,500 KG Connected load: - Total connected load approx. 157 KW Condition: Machine as shown on the photos - technically as good as new Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: At any time by appointment Offers + inquiries only with complete company data Subject to errors and prior sale

Condition: good (used), Year of construction: 1982, functionality: fully functional, type of input current: three-phase, MCS Jigger High Temperature 144ºC. Type COMBY-JIGGER JP70. Year 1982. It underwent a complete renovation in 2002 Kjdpfxsfqmx Ts Adqsnd Pressure: 3kg/cm2 Capacity: 9170 l Roller width 2,000 mm. Diameter of fabric 1100 mm. Diameter of rollers 324 mm. Additives tank.

Condition: excellent (used), Year of construction: 2004, Multiblade saw Raimann ProfiRip KR 310 M with HOLTEC ES 121SHKA cross-cut saw and HurricAN extraction system Model: Raimann ProfiRip KR 310 M Year of manufacture: 2004 (refurbished in 2022) Multirip saw with 2 adjustable saw blades Technical details: Knsdpew S S A Tefx Adqod - Track width: 340 mm - Total feed passage width: max. 950 mm (instead of 800 mm) - Cutting height with/without pressure plate: 115 mm / 130 mm - Workpiece length: minimum 450 mm - Maximum saw blade diameter: 380 mm - Minimum saw blade diameter: 250 mm - Saw blade bore: 80 mm - Saw spindle diameter: 65 mm - Saw spindle speed: 3,900 rpm - Main motor: 30 kW - Laser alignment lights: 3 units - Operating pressure: 6 bar - Stepless feed speed: 8 - 48 m/min - Feed motor: 1.5 kW - Voltage: 400V / 50Hz

Condition: new, Year of construction: 2025, 🏆 Upgrade Your Sawmill with the Ultimate Wravor WRC 1250 AC Line! 🏆 🚀 Unmatched Performance – Precision Cutting – Maximum Efficiency 🚀 🔹 Complete Sawmill Solution – From log handling to final cutting, timber sorting, stacking etc. 🔹 Cuts Logs Up to: Ø 1250mm & length: adjusted to customer's demand 🔹 Fully Automatic & Hydraulic System on band saw WRC 120 AC – Fast centering, turning & clamping system on sawbed, full hydraulic equipment on sawhead 🔹 High-Performance Horizontal Band Saw with Sew drive with steel ropes for moving forward-backward, 🔹 Smooth & precise cutting 🔹 Integrated Multi-Rip Circular Saw 20-160 and/or 40-200/250 – Maximized lumber output 🔹 Heavy-Duty Log Loading & Sorting System – Seamless production flow 💡 Why Choose Wravor? ✔️ High-Speed Processing for maximum productivity ✔️ Advanced Automation & Hydraulics ✔️ Minimal Waste, Maximum Yield Knodpfev Id Tlex Adqjd ✔️ Proven Reliability – Sawmills Worldwide Trust Wravor! 📩 Contact Us Today! Get your customized sawmill solution with the Wravor WRC 1250 AC Line and boost your production!

Condition: excellent (used), Year of construction: 2000, Vollmer RC 100 straightening center Knjdpfxevw Nb Ts Adqod

Condition: excellent (used), Year of construction: 2020, Machine in very good condition, low hours – fully equipped. Additionally, 20 saw blades included in the set. SPECIFICATION: WRAVOR BAND SAWMILL Type 1225 AC (tilting edge cutting) Max. log width: 1250/1090 mm Max. cutting length: 8 m Main motor: 45 kW Cast wheels Wheel width: 130 mm Wheel diameter: 1200 mm Lift up/down – double screw TR60x9 (18) + 11 kW Danfoss inverter + Siemens 3-phase motor with brake Electric lifting/lowering motor: 11 kW Saw blade PV 45, length 8685 mm, thickness 1.2 mm, width 140/150 mm Feed drive with electronic controls: forward/reverse feed, SEW gearbox with flat asynchronous controller KA87 / GDRL100L 4BE5 / TF / ES7S / V Manual-sensor thickness adjustment with electric disengagement Digital thickness adjustment with Wravor V280 program Hydraulic unit 40 l, tank with two pumps 13+6 l, 3 kW motor Complete hydraulic system Kedjw E Ei Uepfx Adqend Hydraulic blade guide, left and right (linear HIWIN) Hydraulic debarker / bark cutter: 1 Hydraulic board ejector: 1 Additional hydraulic board ejector and guide Side-mounted control panel Multifunction joystick with 2 positions: 1 Multifunction joystick with 4 positions: 1 Laser 15 mW: 1 Cameras: 3 Fan 2.2 kW + 15 m sawdust pipe + 4 brackets for pipe Water cooling – automatic hydrofor cooling system (Aki Tech high-pressure pump): 1 Preparation for ramp and automatic table + spreader: 1 Diesel lubrication system: 1 TRACK Welded frame, 14 m long Hydraulic clamp with two cylinders: 6 Hydraulic cant flipper: 6 Mechanical supports: 2 Hydraulic roller – forward: 6 Hydraulic log lifter with mechanical rollers: 4 Hydraulic log lifter with hydraulic rollers: 7 Set of lifting rollers: 7 hyd. + 4 m, 1 pc Hydraulic turner – new type: 3 Centering device – 1 set: 4 Hydraulic unit 120 l, tank with single pump 50 l, 15 kW motor + Danfoss inverter: 1 Cable carrier with energy chain: 14.5 m C-profile cable tray for ventilation – 4 double trolleys 4 m belt output conveyor with 1 m feed + 3 kW electric motor, front section with hydraulic lift