Used Speedmaster 72 for sale (2,216)

Condition: good (used), Heidelberg Cylinder S 54×72 Automatic Die-Cutting Machine This machine is in production and ready to go. Format: 540x720mm The machine is ready for die-cutting. Fully automatic, central lubrication. Dodpfx Aoy E Expjkcjcg Includes mounting frame, cylinder plate, carriages, and a set of fillers and locks.

Condition: excellent (used), Weiss Type: WK3-340/70 Weiss Air-Cooled Climatic Test Chamber Touch Panel Control Unit All control and operating commands can be triggered by simply touching the function symbols on the touch panel control unit. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Plug-ins The test chamber is equipped with plug-ins on the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Penetration included in standard equipment R1: NW 125 mm L1: NW 85 mm Volume 335 liters Test chamber dimensions: Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Data for temperature tests: Minimum temperature -72°C Maximum temperature +180°C Temperature deviation, temporal ± 0.1 to ± 0.5 K Temperature homogeneity, spatial ± 0.5 to ± 1.5 K Djdpfsv Sr Hzjx Akcocg Temperature change rate, cooling 3 K/min Temperature change rate, heating 3 K/min Data for climatic tests: Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range: 10 to 98% RH Temperature deviation, over time: ± 0.1 to ± 0.3 K Temperature homogeneity, spatial: ± 0.5 to ± 1 K Humidity deviation, over time: ± 1 to ± 3% RH Operating data: Test room lighting: 2 x 24V, 50W halogen bulb Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Nominal current: 16 A Nominal power: 4.9 kW Fuse: 16 A slow-blow (on-site) Refrigerant: R-452A/R23 Weight: Approx. 585 kg For your safety, the following information is provided as a buyer! The following steps are performed on our chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Year of construction: 2001, condition: good (used), Kaeser BSD 72 compressor Djdpfx Aomnqkiokcocg

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, nominal power (apparent): 36 kVA, controller manufacturer: MATSUURA, controller model: G-TECH 840 DI, total height: 3,500 mm, total length: 6,000 mm, total width: 5,000 mm, overall weight: 15,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, mount diameter: 40 mm, tool length: 300 mm, tool diameter: 80 mm, tool weight: 10,000 g, input voltage: 415 V, input frequency: 50 Hz, input current: 50 A, Equipment: chip conveyor, MATSUURA MAN 72-25 V CNC Universal Machining Center - Tool holder: SK 40 - B-axis travel: -110°/+110° - C-axis travel: 360° - Distance between pallet surface and spindle axis: -20 to 430 mm - Distance between B-axis center and spindle axis: 4 - 410 mm - Distance between B-axis center and spindle axis: -10 mm - Distance between pallet centerline and bed zero point: 265 mm - Distance between pallet centerline and Y zero point: 180 mm - Spindle bearing inner diameter: 70 mm - Tool clamping force: 7.0 kN - B-axis feed rate: 30/min Djdpoy I Sfhjfx Akcscg - C-axis feed rate: 50/min - Max. tool diameter: 80 mm, up to 150 mm with adjacent stations free The machine is equipped with a chip conveyor and a coolant system. Note: Includes the tool holders installed in the tool changer! Note: The machine can be transported on a truck with a width of up to 2,700 mm! Note: The item must be collected bindingly at a date to be coordinated between 24.08. and 27.08.2026. FCA D-61352 Bad Homburg – loaded onto truck

Condition: used, Year of construction: 1996, total length: 3,900 mm, total width: 2,100 mm, total height: 1,520 mm, Weight: 1.500 kg - Year: 1996 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: V233567 - Roller table length [mm]: 3200 - Table width [mm]: 1300 - Min. saw blade diameter [mm]: 200 - Max. saw blade diameter [mm]: 450 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 120 - Controlled axes: Tiltable - Manually adjustable axes: Cutting height - Options: Scoring unit - └ Pre-cutter saw blade diameter [mm]: 120 - └ Arbor pre-cutter saw blade diameter [mm]: 22 - Spindle speed: - └ Min. spindle speed [rpm]: 2800 - └ Max. spindle speed [rpm]: 5500 - └ Spindle speed control: Incremental - Voltage [V]: 400 - Current consumption [A]: 13 - Fuse [A]: 16 Dsdjxdlx Rspfx Akcjcg - Transport dimensions: 3900mm x 2100mm x 1520mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1959, Manufacturer: DANLY, Model: S4-800-132-72, Year of manufacture: 1959, Max. pressure: 800 t, Table clamping surface: 3,350 x 1,830 mm, Ram clamping surface: 3,350 x 1,830 mm, Ram stroke: 610 mm, Ram adjustment: 508 mm, Strokes per minute: 12 - 16, Sliding table, Table cushion pressure: 11 - 113 t, Table cushion stroke: 203 mm, Ram cushion stroke: 152 mm, Press control with operator panel, discharge handling robot (manufacturer), Strothmann robot (not functional), control and switch cabinets, accessories +++ Attention: Machine is part of an online auction! +++ Dcjdpfox R Eftox Akcjg

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, KAESER BSD72SFC screw compressor, machine with frequency inverter, after service Technical specifications: Dcedsyt H Rnopfx Akcog Capacity: 6.76 m3/min (6760 l/min); Motor power: 37 kW; Pressure: 8.5 bar Year: 2008 Net price: 26,700 Gross price: 32,841 The compressor is fully operational. Service provided. Below is a link to a video.

Condition: used, Year of construction: 2010, 530 x 740 mm (20×29″) approx. 176 million prints PressCenter AxisControl Alcolor Autoplate extended delivery Autom. Ink roller washing device, automatic blanket washing device, automatic counter-pressure washing device high pile delivery separate coating unit with chamber doctor blade system IR dryer, AirStar, inking unit temperature control Dcsdpfxsp Ugwts Akcsg perfecting 2/3 antistatic device scale feeder powder device, available at short-notice

Condition: used, Year of construction: 2004, CLEARANCE SALE Automatic Colour Kitchen : Textile Colors Professionally marked, dismantled, and Preserved ! Must be move immediately Make : TERMOELETTRONICA Type : TERMO COLOR Rot Head with 72 Positions Yoc : 2003 , Started in 2004 Pumps / Tanks for thickeners : 6 Pneumatic pumps for pigment & reactive : 12 Dyes Supply Tanks : 20 Max. No of colours : 31 Computerised colour dispensing system & automatic weighing Semi-automatic labelling unit Computerised PC control Dcedpfx Aey Ity Tjkceg With drum transportation & storage Roller Conveyor Belter with Pushing system With 2 lifting / lowering devices Storage tank with mixer & electrical pumps Supporting structure with 5 pneumatic pumps and 10 storage tanks 50lt for disperse dyes - one mixer adjusted as permanent part of kitchen as a part of conveyor trail. - washing unit for mixer working automatically. - system, which is randomly circulating each colour connected with kitchen - for Re-use of colour, there is program in computer system, which enables re-use of additional printing liquid - can produced pigment-reactive-disperse with this unit Installed power : 20 KW Power in use : 5 KW Power supply : 3x380V 50 H z Required : cold water 3 mq/h compressed air 6/7 BAR

Condition: used, mileage: 127,000 km, power: 155 kW (210.74 HP), first registration: 02/2020, fuel type: diesel, overall weight: 7,200 kg, color: blue, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 8,600 mm, total width: 2,550 mm, total height: 3,550 mm, loading space length: 6,600 mm, loading space width: 2,500 mm, loading space height: 2,500 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, For sale here is a well-maintained Iveco Daily 72-210 MAXI flatbed with sliding tarp, equipped with the globally popular 3.0-liter diesel engine. * The vehicle is in good condition! * German vehicle * Regularly serviced * Euro 6d * 1 previous owner Equipment: * Maxi flatbed + sliding tarp * MAXI wheelbase * HI-Matic automatic transmission Dsdpfxsy Iknze Akcocg * Automatic climate control * Cruise control * Air suspension * Tow bar * Increased towing capacity * Rear-view camera * Full LED headlights * 3 seats * Registered as a truck (LKW) * Heated exterior mirrors * Electric exterior mirrors * Electric windows * Central locking * And much more... Technical data: * Permissible gross weight: 7,200 kg * Unladen weight: 3,840 kg * Payload: 3,360 kg * Towing capacity: 3,300 kg * Total length: 8,600 mm * Cargo area length: 6,600 mm * Cargo area width: 2,500 mm * Cargo area height: 2,500 mm Why are we the right choice? * Attractive financing options through our partner bank * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair conditions * Transfer plates (5-day/customs registration) usually available on the same day * Pick-up service from the airport or train station All vehicles are professionally detailed and hygienically clean! Highlights: Disinfection of interior and ventilation system via ozone cleaning. 2-stage exterior polish, possibly paint correction and smart repair. All our vehicles have also undergone thorough maintenance. Of course, this includes new fluids, filters and all other necessary work so you don’t have to worry about them. Optionally, we can present the vehicle at an independent inspection authority or workshop of your choice. We are pleased to have sparked your interest and are available for you around the clock. If you have any questions, comments, or special requests, don’t hesitate to contact us! More information and insights into our company philosophy available upon request. Special equipment: Storage compartment on instrument panel with USB port, front axle load 2.7 t, 13-pin trailer socket, comfort dashboard, audio system: Digital audio system (DAB) with USB and Bluetooth hands-free, bodybuilder interface, automatic climate control, leather steering wheel, height- and length-adjustable steering column, cargo area lighting switch, front mud flaps, full LED headlights Additional features: Driver airbag, trailer stability program (TSM), trailer socket prep, traction control (ASR), C-series variant, exterior mirrors electrically adjustable and heated, long exterior mirrors for vehicle width 2350 mm, brake assist, electronic brake force distribution, assistance system: hill start assist (AAS), emergency brake assist system AEBS + city brake, lane departure warning (LDWS), digital tachograph, front axle with torsion bar suspension, tinted front and side windows, 210 A alternator, Hi-Matic 8-speed automatic transmission, A-pillar grab handle, 20-liter AdBlue tank, body: standard flatbed, 90-liter fuel tank, 3.0 L - 154 kW diesel engine, 5100 mm wheelbase, full-size spare wheel, low-emission according to Euro 6d, cab seats: double passenger seat, cab seats:

Condition: used, mileage: 435,000 km, power: 150 kW (203.94 HP), first registration: 04/2016, fuel type: diesel, overall weight: 7,200 kg, next inspection (TÜV): 01/2027, color: blue, gearing type: automatic, emission class: euro5, number of seats: 3, total length: 8,550 mm, total width: 2,300 mm, total height: 3,000 mm, loading space length: 6,000 mm, loading space width: 2,200 mm, loading space height: 2,040 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, According to our "General Terms and Conditions" as interpreted and without any warranty or guarantee, we are pleased to offer you the following vehicle today on a non-binding basis, subject to prior sale, errors, or typographical mistakes: Iveco 72-210 Hi-Matic Box Truck (Vehicle 900) First registration: 27.04.2016 435,000 km Engine: 2,998 cc 150 kW / 204 hp Inspection (TÜV) valid until 01/2027 Permissible gross weight: 7,200 kg Unladen weight: 3,825 kg Payload: 3,375 kg Overall length: 8,550 mm Overall width: 2,300 mm Overall height: 3,000 mm Aluminum box body Box interior: L: 6,000 mm x W: 2,200 mm x H: 2,040 mm Tail lift: BÄR, 750 kg, upright installation at the rear Wooden floor Lashing eyes in the floor Ball-type trailer coupling Leaf/air suspension Tyres: 235/75R16C, front approx. 40/60%, rear twin wheels approx. 30/30% Central locking with remote control 2 x electric windows, electric mirrors, heated mirrors Radio/CD Fully automatic gearbox Automatic climate control Multifunction steering wheel Tachograph Hands-free kit (pre-installed) Roof spoiler Additional spotlights Price: €19,000.00 (net) All information provided without any guarantee or warranty. Our General Terms and Conditions apply. For both parties, the place of jurisdiction up to a dispute value of €10,000 is the District Court of Ludwigslust; for higher dispute values, it is the Regional Court of Schwerin. Subject to errors, typographical mistakes, and prior sale. Dcodoy Iirrspfx Akcsg

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 13-230021, Technical characteristics: Core Specifications: - Bar Diameter (Round): 6 mm – 50 mm Dedpfxoxx R S Es Akcscg - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Max Remnant Length: 300 mm - Required Air Pressure: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features: - Guide Channel: Manually interchangeable, manufactured from Vulkollan-type plastic for optimal bar rotation at high speeds. - Front Steady Block: Interchangeable in 5 mm increments for precise bar support. - Remnant Management: Supports rear extraction via self-centering extractor or front ejection. - Repositioning System: Optional rail system enabling axial or radial displacement up to 600 mm for lathe servicing. - Automation: Complete PLC control with brushless motor and digital pneumatic valves for feed speed and thrust regulation. - Bar Magazine: Single-row magazine with a 235 mm load capacity. # Bar feeder: FMB Turbo 10-72 XT # AUTOMATIC BAR LOADER FOR LATHES Dimensions: - Bar feeder (L×W×H): 3500 × 800 × 1200 mm - Weight: 1500 kg Main Features and Capabilities: - HMI digital controller for manual operation Machine status: WORKING

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 13-230022, Technical characteristics: Core Specifications - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Max Remnant Length: 300 mm - Air Pressure Required: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features - Guide Channel: Manually interchangeable channels, made from Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable in 5 mm increments for optimal bar support. - Remnant Management: Allows rear extraction via self-centering extractor or front ejection. - Repositioning System: Optional rail system enables axial or radial displacement of up to 600 mm for lathe maintenance. - Automation: Fully PLC-controlled with brushless motor and digital pneumatic valves for precise speed and thrust adjustment. - Bar Storage: Single-level magazine with 235 mm capacity. # Bar Feeder: FMB Turbo 10-72 XT # AUTOMATIC BAR LOADER FOR LATHES Dimensions - Bar feeder (L×W×H): 3500 × 800 × 1200 mm - Weight: 1200 kg Dcjdpfx Akoxx Sawjceg Main Features and Capabilities: - HMI DIGITAL CONTROLLER FOR MANUAL OPERATIONS Machine Status: WORKING

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Dcsdpoy Eizzsfx Akceg Compact and flexible in the smallest of spaces. Workpieces receive their finish within a length of just 2.13 m. Equipped with a 1.1 kW high-frequency motor joining unit and diamond-tipped spiral joining cutter, Teflon-coated glue unit, pre-end trimming unit, and HF multifunction milling unit. Two free slots for finishing units, such as a surface scraper and polishing unit. Simple operation via 3.5'' color touchscreen. Technical data Machine length: 2,122 mm Workpiece thickness: 10–45 mm Minimum workpiece width: approx. 120 mm Edge thickness: 0.4 – 2.0 mm Edge height max.: workpiece height + 4 mm (2+2) Electrical connection: 400 V Total connected load: 3.6 kW Feed speed: 6.5 m/min Pneumatic connection: 6 bar Net weight: approx. 490 kg Options: Surface scraper unit Diamond tools, height = 45 mm Location: Flörsheim Availability: short-term

Condition: excellent (used), Year of construction: 1981, Format (cm): 72 Dodpfxsyvtqhe Akcocg Equipment / Additional information: 1x reserve knife

Condition: excellent (used), Format (cm): 72 Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Dodpfx Akjvxqz Docecg

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: GS000506, Counter: 26‘795‘055 // Speed: 13000 Sheets / h Format: Sheet format max. 370 x 520 mm // min.: 105 x 145 mm Print format max: 360 x 520 mm Dedpfxovw Ai Ro Akcocg Thickness: max. 0,4 mm Dampening: Alcolor dampening systems with Baldwin BC 713 EF cooling device Powder device: Alphatronic 200 Equipment / further information Ultrasonic double sheet control Heidelberg EasyPlate plate clamping device with automatic plate cylinder positioning for quick plate changes with just one tool. Blanket cylinder with central clamping screw for tensioning at the front and rear edges Automatic blanket and impression cylinder washing device (for normal colors) suitable for conventional and vegetable oil-based washing agents, program-controlled via the control system.

Condition: excellent (used), Year of construction: 2012, operating hours: 36 h, functionality: fully functional, color channels: 5, Coating unit (chamber doctor blade system) Prinect Axis Control Prinect Press Center with remote control for ink zones, ink ducts as well as circumferential, lateral and diagonal register with Job Memory Card and touch screen Alcolor film dampening system with recirculation and cooling Autoplate automatic plate changing system Dcjdoy Hvt Hopfx Akcsg automatic ink roller washing device automatic blanket and impression cylinder washing device Substrate thickness extension 0.6 mm Powder sprayer IR dryer Extended high-pile delivery Standard accessories

Condition: excellent (used), LOG CABIN MILLING MACHINE FOR PRODUCING CHALET CORNER JOINTS BY MILLING FOUR SIDES OF THE LOG BEAM. MAXIMUM LOG LENGTH 6000MM (DISTANCE BETWEEN 5770 MM) MINIMUM LENGTH 450 MM 4X MILLING HEADS PER SIDE (2 SIDES) CAPABLE OF 3 CYCLES PER MINUTE MAXIMUM WIDTH 250 MM MAXIMUM THICKNESS 140MM SUPPLIED WITH ADJUSTABLE TOOLING SUITABLE FOR 34MM TO 70MM JOINTS Dcodey Hb Uiopfx Akcjg 8X 4 KW MILLING MOTORS DIGITALLY DISPLAYED LENGTH MEASUREMENT SYSTEM SIMPLE ELECTRONIC CONTROLS (NO PLC) 5,5 KW FEED MOTOR POSSIBLE TO SUPPLY WITH STACKING UNIT AFTER IF NEEDED MODIFIED LEFT SIDE TO ALLOW CHALET ROOF OVERHANG LENGTH AS NEEDED VERY GOOD QUALITY KNOTCHING PRICE DISMANTLED AND LOADED TO TRUCK

Condition: used, Year of construction: 2004, Automatic Colour Ink Preparation Kitchen: Textile Colours/Inks for Rotary Printing Professionally labelled, dismantled, and preserved! Must be moved immediately. Manufacturer: TERMOELETTRONICA Model: TERMO COLOR Rot - Colour head with 72 positions - Year of construction: 2003, commissioned in 2004 - Pumps/tanks for thickeners: 6 - Pneumatic pumps for pigment & reactive dyes: 12 - Dye supply tanks: 20 - Maximum number of colours: 31 - Computerised colour dispensing system and automatic weighing - Semi-automatic labelling unit - Computerised PC control - With drum transport and storage - Roller conveyor belting with integrated pusher system - Includes 2 hoisting/lowering units - Storage tank with agitator/mixer and electric pumps - Support frame with 5 pneumatic pumps and 10 x 50L storage tanks for disperse dyes - One agitator is integrated as a permanent part of the kitchen/conveyor line - Automatic mixer washing unit - System randomly recirculates each colour connected to the kitchen Dodpsy Exd Sofx Akcecg - Computer program enables re-use of surplus printing liquid - Suitable for production of pigment, reactive, and disperse dye solutions - Installed power: 20 KW - Power consumption: 5 KW - Electrical supply: 3x380V, 50 Hz - Utility requirements: Cold water 3 m³/h, compressed air 6/7 BAR

Year of construction: 2014, operating hours: 5 h, condition: like new (used), functionality: fully functional, grinding spindle speed: 16,000 rpm, IMT Spindle Type DRESS 72 - 37 - Absolutely like new For truing profile grinding wheels, incl. motor connection cable and spindle bracket. According to the manufacturer, highest precision and smooth running during the truing process of CBN grinding wheels. HF Spindle Dress 72 - 37 Spindle housing: 72 mm Speed up to 16,000 rpm (clockwise/counterclockwise) Power S1 100%: 0.5 kW from 11,500 rpm Power S6 40%: 0.8 kW from 11,500 rpm Motor type: Asynchronous, 3-phase Number of poles: 4-pole Power consumption: Voltage: 230 Volt Current S1 100%: 2.0 Ampere Current S6 40%: 3.5 Ampere Current (max): 6.0 Ampere Dsdpfjgl Arrsx Akcjcg Frequency up to 533 Hz Spindle ball bearings: Hybrid ceramic Bearing lubrication: Lifetime grease-lubricated Cooling: bracket cooling Purge air + labyrinth: 1 bar, approx. 50 l/min Temperature monitoring: PTC Tool holder: Ø 40 h2 Manual tool clamping Electrical connection (motor): 8-pin plug Axial supply connections Weight: approx. 4.7 kg Motor cable: 8+PE KD /-.10 Spindle bracket 72 complete Aluminum, black anodized Reducing sleeve 80 / 72 Dressing spindle for mounting dressing rolls on CNC grinding machines Profiling in grinding wheel Operating instructions available Spindle was used for trials on the machine. Price / details upon request. All technical data subject to error/typos. Sale exclusively to countries of the European Community.

Condition: good (used), Year of construction: 2000, Sizing saw with scoring unit 3 m sliding carriage Digital displays Djdpfxetw Hd Aj Akcscg Width adjustment is no longer motorized Height adjustment converted to foot hydraulics Clamping beam not included in the price

Year of construction: 2000, condition: good (used), Pressure beam for circular saw for clamping panels or veneers Dcsdpfx Aketxirfocsg for 3 m sliding carriage

Condition: like new (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, machine/vehicle number: N20240816STD, total width: 30 mm, briquette diameter: 30 mm, overall weight: 4,800 kg, control cabinet length: 600 mm, control cabinet height: 1,600 mm, type of input current: AC, input current: 450 A, space requirement width: 45,000 mm, space requirement length: 500,000 mm, space requirement height: 6,000 mm, input frequency: 50 Hz, input voltage: 415 V, We offer this as new The Nile 90-72 RDF briquetting press compactor machine, year of construction 2024. 3-4 tonnes per hour. Dcodpfxjyr E Dqo Akceg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 760 mm, travel distance Y-axis: 845 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 20,000 rpm, number of axes: 5, This 5-axis Matsuura MAM 72-63 V was manufactured in 2008. It features impressive travels with an X-axis of 760 mm, Y-axis of 845 mm, and Z-axis of 610 mm. The machine includes a maximum workpiece capacity of Ø800 mm × 450 mm height and a tool magazine with 150 positions. If you are looking to get high-quality machining capabilities, consider the Matsuura MAM 72-63 V vertical machining centre we have for sale. Contact us for further details. • Rotary axes: A +110° / -110°; C 360° • Table/work area: • Max workpiece: Ø800 mm × 450 mm height • Table to spindle nose: 120 – 730 mm • Feed rates: • Rapid traverse (X/Y/Z): 50,000 mm/min • Cutting feed (X/Y/Z): 1 – 50,000 mm/min • Accuracy: Minimum increment 0.001 mm • Tooling: Tool magazine with 150 positions • Other: Spindle hours 23,000 h Additional equipment • Twin pallet system • Workpiece probe • Tool probe Dcedpfxeyzzq Hj Akceg • High-pressure coolant (50 bar) • Filtration system • Chip conveyor with drum filter