Jig Boring Machine - Double Column

HAUSER M 5

Condition: used, spindle diameter 90 mm x-travel 700 mm y-travel 500 mm Control Heidenhain bore capacity in steel 40 mm spindle taper MK 4 bore spindle stroke 170 mm Blsdpfsxwzg Rjx Ak Eog spindle turning speed - stepless 10-2.000 U/min ll diameter 230 mm table dimensions 900 x 770 mm vertical travel of crossrail-slide 630 mm boring spindle 6 Stück/ 0.02-0.20 U/min distance between columns 900 mm Passage between spindle and table 815 mm spindle drive 4 PS total power requirement 380 V weight of the machine ca. 3,9 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: excellent (used), Dividing head Walter Type UPA 125 N (28487) Blodpfx Aetrnndjk Eog direct and indirect dividing center height 125 mm Can be used horizontally and vertically Spindle holder MK 4 KKG 3 Travel bag SPH 125 mm Mounting MK 2 Total transport weight 62 kg dividing head 48 kg

Condition: good (used), Spindle diameter: 80 mm Spindle nose: SK50 Spindle speeds: 11 - 1000 RPM X-axis movement: 1700 mm Y-axis movement: 1800 mm Z-axis movement: 1800 mm Spindle out (W-axis): 710 mm Table size: 1100 x 900 mm Elbo Digital readout: On Y-axis and Z-axis Featured with: - Turning table - Toolholders Spindle engine: 7,5 KW Machine LxWxH: 5100 x 2650 x 3300 mm Machine weight: 10 Ton Blsdpophl Ecefx Ak Esg

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, CNC Turning and Milling Center - DMG GILDEMEISTER - CTX gamma 1250 TC YOM: 2009, until 2011 showroom machine, from 2012 operating The machine can be inspected by appointment in the factory under power. Condition: Good (high accuracy), ready for immediate use. Bledpfx Akew Hg Nlo Ejg Spindle hours (August 1st, 2025): 9.580 h The heart of the machine is the integrated traveling column with turning milling spindle and interpolating B-axis. Machine basic data: * Part hollow clamping device (hydraulic) * C-axis * Cross slide above with turning/milling spindle as motor spindle, with hydraulic clamping in turning, tool holder: Capto C6 * Y-axis: +/- 200 mm * B-axis: +/- 120° * Disc-type tool magazine * Absolute, direct measuring systems in X-, Y-, Z1-axis * USB-interface, Ethernet interface TECHNICAL SPECIFICATIONS: * Control: Heidenhain CNC Pilot 4290, 3-D path control TURN PLUS Working area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm * Spindle distance: 1.510 mm * Bar diameter max.: 65 mm Main drive I: * Drive power (100% / 40% ED): 24 / 34 kW * Speed range from - up to: - 5.000 rpm * Speed of the C-axis: - 5.000 rpm Turning/milling spindle: * Tool holder: Capto C6 * Spindle speed: - 12.000 rpm * Drive power (100% / 40% ED): 13.2 / 22 kW * Torque (100% / 40% ED): 60 / 100 Nm Tool magazine: * Number of tools: 36 * Dimensions of the machine approx. (Width/Depth/Height): 6.860 x 4.220 x 2.530 mm * Total weight of the machine approx.: 18,5 tons EQUIPMENT: * Well equipped … * No steady rest available * Documentation complete available. Detailed technical data sheet and information on equipment available on request. There is no guarantee for correctness and completeness of the technical details and and accessories.

Condition: excellent (used), Year of construction: 2017, x-travel 1016 mm y-travel 508 mm Blodpey Aphisfx Ak Eeg z-travel 635 mm Control HAAS spindle turning speed range 8000 U/min spindle taper 40 table-size 1219 x 457 mm table load 1,588 t Working speed 16,5 m/min tool piece magazine with 24 total power requirement 22,4 kW weight of the machine ca. 6,3 t dimensions of the machine ca. TBH 2,48 x3,15 x2,5 (2,9) m Well-maintained machine with only 1,603 operating hours - Includes 4th axis HAAS HRT310 - Includes tailstock for 4th axis - Includes Renishaw HAAS WIPS Wireless Intuitive Probing System - Includes 48 tool holders, some with tools - Includes chip conveyor - Includes internal spindle coolant - Includes programmable coolant nozzle - Includes USB interface - Includes network connection

Condition: good (used), functionality: fully functional, Equipment: type plate available, 100,000 liter tank, used, double-walled, good condition, ready for immediate use, cleaned - certificate from specialist company available Bsdpouzvyujfx Ak Eelg Length: 15.74 m Diameter: 2.90 m Height: 3.10 m - Transport height - Access ladder - Platform with railing - Firmly welded saddle feet - Ventilation - Limit value transmitter - Dipstick - leak detector Loading and transportation can be offered. Only serious and serious inquiries will be answered: Name, e-mail address and telephone number.

Condition: good (used), Year of construction: 1994, functionality: fully functional, feed length X-axis: 1,050 mm, feed length Y-axis: 360 mm, feed length Z-axis: 500 mm, travel distance X-axis: 1,050 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 500 mm, overall weight: 3,000 kg, Equipment: documentation/manual, Tiger FO 135 universal milling machine Description of the machine The machine was purchased new in 1994 and has only been in operation for a few hours. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition. good condition. These have an automatic lubrication system. The table is in good condition and shows hardly any signs of wear. The machine also has a digital readout for the 3 axes, which makes it possible to work with cutter compensation and recurring measurement machining. Operating instructions are included with both the machine and the digital indicator. Technical specifications - Table dimensions 1,400 x 340 mm, 4 T-slots - Automatic traverse path: ➢ Longitudinal X 1,050 mm ➢ Transverse Y 360 mm ➢ Vertical Z 500 mm - Fixing the spindle cone: ➢ Vertical axis ISO 40, automatic locking ➢ Horizontal axis ISO 40, manual locking - Spindle speed range: ➢ Vertical axis 33 ÷ 1,560 rpm, 12 speeds ➢ Horizontal axis 35 ÷ 1,550 rpm, 12 speeds - Installed power: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ Direct current motor 15 Nm - Variable power supplies Continuous speed 0 ÷ 1,500 mm/min - Fast feed ➢ Lengthwise and crosswise 3,000 mm/min Vertical 1,500 mm/min - Universal head with manual shaft lowering of 80 mm - Automatic lubrication with pump - Low-voltage electrical controls on the pushbutton panel of the side arm - Star/delta start - Magnetic thermal protection from Siemens - Net weight 3,000 kg - Machine dimensions (for transportation) ➢ Width 2,300 mm ➢ Depth 2,900 mm ➢ Height 2,400 mm Accessories - Counter supports for cutting shaft - Cutting shaft ø32 mm Tiger FO 135 universal milling machine Description The machine was purchased new in 1994 and has only had a few hours of operation. The milling machine is fully functional. Axis movements are smooth and the guides are in good condition. These have an automatic lubrication system. The table is in good condition and shows hardly any signs of wear. The machine also has a DRO for the 3 axes, which offers the possibility of working with milling compensation and recurring measurement processing. Both the machine and the DRO come with operating instructions. Technical specifications - Table dimensions 1,400 x 340 mm, 4 T-slots - Automatic travel: ➢ Longitudinal X 1,050 mm ➢ Transverse Y 360 mm ➢ Vertical Z 500 mm - Fixing the spindle cone: ➢ Vertical axis ISO 40, automatic locking ➢ Horizontal axis ISO 40, manual locking Bljdpfx Ajrqwbiok Eeg - Spindle speed range: ➢ Vertical axis 33 ÷ 1,560 rpm, 12 speeds Horizontal axis 35 ÷ 1,550 rpm, 12 speeds - Installed services: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor 15 Nm - Variable power supplies Continuous speed 0 ÷ 1,500 mm/min - Fast forward ➢ Longitudinal and transverse 3,000 mm/min ➢ vertical 1,500 mm/min - Universal head with manual shaft lowering of 80 mm - Automatic lubrication with pump - Low voltage electrical controls on side arm push button panel - Star/delta start - Magnetic thermal protection from Siemens - Net weight 3,000 kg - Dimensions of the machine (for transport) Width 2,300 mm ➢ Depth 2,900 mm ➢ Height 2,400 mm Accesories - Counter supports for cutting shaft - Cutting shaft ø32 mm

Condition: ready for operation (used), Year of construction: 2007, operating hours: 620 h, Travel path X/Y/Z: 1630mm/860mm/760mm, speed: 8000rpm, torque: 142Nm, power: 15kW, tool positions: 40, max. tool diameter: 75mm/127mm, max. tool length: 300mm, max. tool weight: 10kg, table dimensions X/Y: 1680mm/890mm, max. table load: 2700kg. Machine dimensions X/Y/Z: approx. 6400mm/4400mm/3300mm, weight: approx. 14500kg, control: Hurco Ultimax 4, operating hours: approx. 621h. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026. Blsdpfxjw Dfhzo Ak Esg

Year of construction: 2008, condition: ready for operation (used), Sanding range: 2000x900mm, transverse movement: 875mm, longitudinal movement: 2450mm, distance table to spindle center: 845mm, magnetic clamping plate dimensions: 2000x800mm, max. table load: 2.3t, feed rate longitudinal axis: 1000-30. 000mm/min, feed transverse axis: 0,01-2000mm/min, feed vertical axis: 0,001-1500mm/min, grinding wheel dimensions: 500x100x203,2mm, power grinding spindle motor: 22kW, length: 6800mm, width: 3450mm, weight: 13t. On-site inspection is possible. Bjdjuyk N Iepfx Ak Ejlg

Year of construction: 2025, condition: new, Ultrasonic bath UEC 300 is industrial solution for cleaning large and heavy parts that are very dirty. The machines contain a pneumatic elevator capacity of 200 kg. Working frequency is 28kHz with sweep technology. The machine consists of a main ultrasonic bath with three side ultrasonic piezo transducers and second, overhead bath with oil separator. Control is with high quality touch screen HMI with 3D display notifications. Complete bath is made from acid resistance stainless steel AISI304 thickness 2mm. ----- Characteristics : Bljdpfx Akogd Uife Eog Platform size : 900x570mm Maximum load : 200 kg. Useful height : 400mm Ultrasonic power : 3kW(6kWp-p) Ultrasonic frequency 28 kHz with sweep mode Heater power : 9kW FEATURES : Touch screen 7 " with 3D notification Automatic water filling system. Automatic elevator mode work Level sensor Elevator position sensors Cover sensor Warranty : 2 years. WE HAVE AND OTHER MODELS ON STACK