Vertical panel saws Harwi Orca 2150 2016

Harwi Orca 2150

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Prjdpfx Aevvkfdednod

Condition: excellent (used), Year of construction: 2015, HOLZ-HER Sprint 1329 Podjxducropfx Adnjrd - Used edge banding machine in good condition. - Year of manufacture: 2015 - Includes BARBARIC return conveyor (year: 2017) - Available from end of November/beginning of December 2025 Please feel free to contact us if you have any questions.

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Specifications and technical data: Base machine 1057 XL C with Beckhoff touch-screen control Extendable workpiece support 600 mm Extension for extendable outrigger Standard infeed fence 3 LED lights in the infeed area Jointing unit with two motors DIA jointing cutter 70 x 64 x 30 mm Z2+2, left and right rotation Edge feeding system 1903, fully automatic GluJet 301 adhesive application system Automatic reloading function Magazine for 1.4 kg adhesive cartridges (holds 4 cartridges) GluJet collection container Pressure unit 1912-3, pneumatic Spray device GM 201 after pressure unit End trimming unit 1918, pneumatic Extraction hoods for end trimming unit Combined trimming unit FR201 with DIA cutters R=2 mm Contour trimming unit 1832 Shelf program Radius scraper ZK 301 Chip collection box Prodpjw I U Rfofx Adnsd Flat scraper FK 701 Spray device front and rear TR201 Buffing unit 1940 Availability: short-term Location: Flörsheim

Condition: new, Year of construction: 2025, Size: 6 Podpfxsdlhdbo Adnsrd Nominal heat output: 170kW -- BImSchV stage 2 and CE conform-- combustion chamber completely fireclayed For rooms of: 4.800 m³ (according to DIN) Fuel: logs, chipboard, chips, chip briquettes fuel consumption: 40 - 50 kg/h Blower air capacity, free blowing: 14.000 m³/hour Outlet opening: Ø 700mm Flue pipe connection Ø 220 mm Weight: 2.150 kg SPS control cabinet: 380 Volt

Condition: used, Year of construction: 2016, Sliding table 2800 mm, cutting width 1250 mm, controlled parallel fence, kappa 400 X, tilting saw unit 45°, saw blade diameter: 250 - 400 mm, max. cutting height: 133 mm, electric height adjustment, motor 5.5 kW, 3 speeds: 3500/4500/7500 rpm. X Motion screen control (touch function) at eye level, additional scoring function, easy-lock quick-change system for main saw blade. Location: Supplier Podpfx Adexta Dmensrd

Condition: excellent (used), Year of construction: 2023, Single-sided edge banding machine Make: Felder / Format 4 Model: Tempora 45.03 L Year of manufacture: 2023 Edge bander with pre-milling unit Edge thickness: 0.4 - 3 mm Workpiece thickness: 8 - 45 mm Pre-milling unit Gluing station for PUR/EVA End trimming saw unit Flush/radius milling unit Corner rounding unit Prjdpfx Aexrbkfjdnjd Cleaning spray unit Buffing unit Control unit: Smarttouch 15" touchscreen Set-up length approx. 4300 mm Total connected load: 14.5 kW Voltage: 400 V, 50 Hz, 3-phase, 22.8 A

Condition: used, Year of construction: 2019, incl. 4-roller feed unit Felder Variofeed 4 (3-18 m/min.) electronically controlled height and angle adjustment milling spindle D=30 mm Centrex access protection for milling milling fence max. cutter diameter 250 mm infinitely variable fine adjustment of the take-off side +35/-10 mm with digital display complete fence position-controlled adjustable milling fence can be folded up and down milling fence rails 550 mm ALU anodized with safety rulers quick clamping of the milling fence extension frame 1270 mm with emergency stop EURO run-in protection 5.5 kW motor with variable speed control speed range: 1500 - 10000 rpm speed range: 8000 - 15000 rpm HG spindle control panel at eye level with x-motion control table size: 1160 x 770 mm table opening: 320 mm swing-away device for feed unit on F 900 incl. extension for feed unit Predpoxta Dyjfx Adned Location: Supplier

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, We offer Atlas Copco compressors TYPE GA 55 Pressure 10 bar Motor 55 kW Year 2000 Compressor with documentation Pedpfx Aowa Iz Asdnjrd We also have other compressors from Atlas Copco, Kaeser, and Mahle

Condition: excellent (used), Block Gluing Press STROMAB SL2-6000 Gluing length: 6000mm Gluing height: 1200mm Maximum gluing width: 200mm Number of vertical hydraulic presses: 12 Number of frontal presses: 6 Cylinder diameter: 70mm Podpfx Adowzg Scenerd Vertical cylinder pressure: 7300kg CE certificate DTR documentation

Condition: ready for operation (used), Compressor GA-55 - maximaal 10 bar - 131 liter/sec bij 8 bar = 50,7 kW - 129 liter/sec bij 9,5 bar = 56,3 kW - gewicht: 1600 kg - afmetingen: 2590 x 912 x 1790 mm Pedowxz D Ijpfx Adnsrd Droger FD130 - 132 liter/sec bij 3° C - 165 liter/sec bij 6° C - 186 liter/sec bij 10° C - maximaal 20 bar - gewicht: 200 kg - afmetingen: 1419 x 686 x 928 mm