Vertical panel saw Holz-Her 1220

Holz-Her 1220

Condition: excellent (used), functionality: fully functional, saw drive: 3,000 W, Holz-her 1220 automatic vertical panel saw. Dedjx Eyqyspfx Adajur Multiple settings, half or whole board cutting. You can try it, it works well.

Condition: good (used), Year of construction: 2012, functionality: fully functional, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X axis: 4,300 mm X axis pendulum operation: 1,620 mm Y axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X axis: 3,300 mm X axis pendulum operation: 600 mm Y axis: 1,240 mm Work table: 8 ATS workpiece supports with 3 vacuum cups each 8 rear workpiece stops, program-controlled lowering, each mounted in one support 8 workpiece stops, 670 mm from rear, each mounted in one support 2 + 2 lateral workpiece stops 4 removable center stops 6 lift rails, pneumatically program-controlled lowering, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum cups via EPS (Electronic Positioning System) Automatic central lubrication Vacuum system divided into 2 separate work zones along the X axis Vacuum assist system for clamping templates Chip conveyor integrated into the machine table Vacuum pump 90 cbm/h Processing head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, diameter 120 mm, fixed in X direction Grooving saw, diameter 120 mm, fixed in Y direction Duedpoxraimefx Adasr Milling spindle 13.2 kW (11 kW in S1 operation), HSK 63 F Mounted on Z1 axis Speed range 1,000 – 24,000 rpm Clockwise and counter-clockwise rotation C axis 360 degrees for adapter units Cleaning nozzle for cleaning the milled edge before the edge banding process Tool magazine for 16 tools Edge banding unit for workpieces up to 60 mm thickness Edge banding unit CNC controlled, with 360 degree endless rotation Glue application for hotmelt adhesive Double pressure roller, interchangeable and can be switched off Heating lamp for preheating edge band material End trim unit to cut the edge band material at an 8-degree angle to the workpiece edge using circular saw blade Technical data: Plastic edge thickness 0.4 – 3 mm (*) Solid wood edge thickness 0.4 – 2 mm (*) (Best results achieved using wood edges with primer from 0.4 – 1.2 mm) Max. edge height 64 mm Panel thickness min. 14 mm, max. 60 mm Min. inside radius 18 mm for edge thickness less than 1 mm Min. inside radius 30 mm for edge thickness 2 mm Min. panel size for edge banding: 300 x 300 mm Min. size for edge banding of internal cutouts: 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine—this solution limits pendulum processing. Roll diameter for edge material: 800 mm Safety equipment: * Safety mats in front of the machine * Safety fence on the right with access door Without tools Control system: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Units: - Flush/radius trimming unit - Combination profile/flat scraper unit - Sawing unit

Condition: used, Year of construction: 1992, Max. cutting width: 5300 mm Max. cutting height: 2200 mm Saw blade diameter: 300 mm Max. processing thickness: 80 mm Saw blade bore: 30 mm Bottom support: Fixed rollers Saw head pivoting: Manual Saw feed: Automatic Extraction: External extraction Approx. weight: 1500 kg Motor power: 5.5 kW Storage location: Nattheim Dujdpfxevvkq To Adaer

Condition: new, Year of construction: 2026, Engine power 5HP Blade diameter 250mm Blade revolutions per (min) 5300 Automatic pneumatic movable table Galvanized iron and polyzene supports √ Djdou Rqq Hepfx Adaour Maximum horizontal cutting length 4200mm Maximum vertical cutting height 2200mm Maximum horizontal cutting height 2080mm Maximum cutting depth 60mm

Condition: used, Year of construction: 2006, operating hours: 8,835 h, load capacity: 6,000 kg, lifting height: 4,000 mm, fuel type: diesel, empty load weight: 9,160 kg, color: red, We offer a side loader Jumbo JDQ 60712/52 Djdpfex Trllsx Adasur

Condition: good (used), Year of construction: 1995, max. cutting length 6200 mm max. cutting width 600 mm max. cutting height 170 mm Duedpjxiu Dtofx Adasr motor 11 kW

Condition: good (used), Year of construction: 2011, Fully automatic wood infeed with feed roller conveyor Extension of transverse feed conveyor and feed roller conveyor for timber lengths up to 13 m Transverse loading and feed conveyor Under-table swing cross-cut saw Universal 4-axis milling unit (UF4) Combination support for vertically operating tools Drilling unit 2.2 kW Dedpjwuppwsfx Adaour Combination support for horizontally operating tools Drilling unit 2.2 kW Longitudinal and transverse grooving mill Marking device at the rear (stop side) Fully automatic beam turning station – hydraulic Transport and positioning device "two-hand system" Electronic control with EKP software Roller conveyor for wood outfeed incl. extension (without drive) Component ejector 5-arm wood rack Safety devices and protective guards

Condition: excellent (used), Year of construction: 2021, operating hours: 5,780 h, functionality: fully functional, power: 7.5 kW (10.20 HP), operating pressure: 11 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, type of cooling: water, Equipment: refrigerant dryer, type plate available, Kaeser Complete Compressed Air System - SM 13 + TA 8 + OKS (Otto Klein) Dusdpfx Aoxwbdvedaor For sale is a complete, fully operational compressed air system consisting of: 1. Kaeser SM 13 screw compressor (Aircenter, detailed information attached) 2. Kaeser TA 8 refrigeration dryer (please refer to the attached image for detailed information) 3. OKS Otto Klein compressed air receiver (please refer to the attached image for detailed information) The unit already features an integrated tank and built-in cooler. Additionally, the package includes a separate cooler and compressed air receiver, as shown in the images. This means that both the internal equipment and the supplementary accessories are included in the delivery scope. The system has been regularly maintained, is in excellent, ready-to-use condition, and is immediately available for operation. Our Service Commitment: We prioritize quality, expertise, and customer satisfaction above all else. Our team is composed of qualified and experienced technicians who specialize in Mazak machinery as well as other machines. We place great importance on personal service and are happy to assist you even after the purchase. With us, you are in the best hands – professional, reliable, and passionate about machinery! PS CNC Service Germany GmbH & Co. KG All information subject to change. No liability for errors or omissions.

Condition: good (used), Year of construction: 1969, Wood band saw, band saw machine, band saw, vertical band saw Dsdpfxeh N Thwj Adajur -Manufacturer: Hema Paul and Gotthilf Heermann, vertical band saw -Type: unfortunately without type designation -Drive: 4 kW -Cutting width: max.785 mm -Cutting height: max.475 mm -Saw band: length 5600 mm -Work table: pivoting -Drive motor with brake -Dimensions: 1600/1020/H2430 mm -Total weight: 794 kg

Condition: used, Year of construction: 2009, Sawblade tiltable 45 ° Length of the rolling table 1800 mm cutting width 250 mm Motor output 2,5 kW Duedoxcp N Djpfx Adasr Cutting height 80 mm Cutting height at 45° 53 mm Saw blade diameter 250 mm Speed 3800 U/min. weight of the machine ca. 100 kg Equipment: - Extraction system - Saw blade - Parallel guide - Operating instructions