Jig

GF AgieCharmilles FORM 20

Condition: excellent (used), Year of construction: 2021, Turning length: 1,500 mm Kdodpox Nm Uaefx Ah Nsg Max. turning diameter: 670 mm Max. main spindle speed: 5,000 rpm Max. sub spindle speed: 5,000 rpm Milling unit tool holder: CAPTO C6 Includes HAINBUCH chuck with quick-change system Includes bar feeder Includes KNOLL chip conveyor / band filter Includes various tools Includes complete documentation

Condition: excellent (used), Year of construction: 2012, travel distance X-axis: 2,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 40,000 m/min, rapid traverse Y-axis: 40,000 m/min, rapid traverse Z-axis: 40,000 m/min, table width: 750 mm, table length: 2,900 mm, table load: 2,150 kg, X - Travel: 2600mm Y - Travel: 700mm Z - Travel: 700mm A - Axis: 360000° B - Axis: - 110 to + 110° Table Length: 2900mm Table Width: 750mm Table load: 2150 Table Ø: 750mm Feed rate X-Axis: 40000mm/min. Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 35kW Speeds / ranges: 18000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 8400mm Width: 3423mm Height: 2620mm Weight: 16000kg Kdsdpfjxuqv Asx Ah Neg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2001, operating hours: 47,600 h, machine/vehicle number: 325, System: TX8H Spindle passage: 80 mm Turning length max: 750mm Turning diameter: 340mm Power: 22kw Number of tool holders: 12 Shaft diameter: 40 Powered tools in all positions X axis Kdodpfx Aheh Dzqlj Neg Z axis C axis Automatic tailstock chip conveyor

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Kdodpfjw Ucyujx Ah Nsg Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.

Condition: good (used), Year of construction: 2016, X-Axis Travel (mm): Kdedpow Tc Hfefx Ah Nog X-Axis Travel (mm): X-Axis Travel (mm): Worktank length: Worktank width: Worktank height: Max. workpiece length: Max. workpiece width: Max. workpiece height: Max. workpiece weight: Taper angle/height: Automatic Wire Feeding: Length x width x height: Weight (kg): Worked power hours: The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change.

Condition: used, Year of construction: 2003, Diesinking / EDM Ksdpfsvyzf Njx Ah Nedg Travel distance X: 350 mm Travel distance Y :250 mm Travel distance Z: 300 mm table size X: 500 mm table size Y: 400 mm max. workpiece size X: 780 mm max. workpiece size Y: 530 mm max. workpiece size Z: 300 mm max. electrode weight: 50 kg max. workpiece weight: 500 kg electrode changer: 4 - time generator: 64 Ampere drop tank control Charmilles

Condition: new, MEP SHARK 230-1 NC HS 5.0 Two-column metal band saw Item number SH230-1NCHS motor power 2,2kW band opening 235 mm band dimensions 2950x27x0,9 mm Kdsdpfschhfujx Ah Nsg weight 1.000 kg speed 15 - 100 m/min. infinitely variable cutting surface 0° 230 / 230x230 cutting surface 45° right cutting surface 45° left cutting surface 60° right cutting surface 60° left Description: SHARK 230-1 NC 5.0, electro-hydraulic twin-column fully automatic bandsaw with semi-automatic and fully automatic mode. Max. remnant length 70 mm. Bundle cuts 230 x 230 mm. Numerically controlled sawing machine with the new MEP 50- Windows based control. Material feed with stepper motor via ball screw mounted on opposing ball bearings. Single stroke 500 mm - repeatable to saw any length. Easy programming - enter cutting length and number of pieces and press "START". Electronic belt tension control. Automatic monitoring of cutting load by servo valve mounted directly on the cylinder. Rotation control of the band with immediate stop in case of a blocked saw band.

Condition: used, Year of construction: 2024, controller manufacturer: Sonstige, _____ Description: Year of manuf. : 2024 Control : Sonstige In General: Year of manufacture:2024 Traverse path X/Y/Z:800/ 1,500/700 mm Maximum table load:800 kg Measuring accuracy:0.0005 mm Repeat accuracy:0.002 mm Ksdjxv Nkuepfx Ah Nodg Touch probe:Renishaw PH 10M Plus

Condition: like new (used), Year of construction: 2012, 12 station, Siemens Sinumerik 840D control, load / unload, VAS air cleaning unit, (2012) Technical Data - Grinding Spindles (With Two spindle ends) Interface - Cone ø 31.75mm Performance 100% / 40 % ED - 11.5 / 14.5kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance - 100% / 40% ED - 11.5/ 14.5 kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance 100% / 40% ED - 11 / 12 kW Standard rotation speed - 18,000rpm Option: One spindle end Interface - HSK 80E Performance 100% / 40% ED - 30/30 kW Standard rotation speed - 8,000 rpm Option: High Frequency spindle - On request Machine Table Clamping surface - 1000 x 500mm Number, distance and width of the T slots - 9 / 50 / 12H7mm Work Range X- Axis - 700mm (optional) 1000mm (optional) 1200mm Y Axis - 410mm Z Axis - 500mm Ksdpfx Ahsv Igghs Njdg C Axis angle of rotation - 320° Option: X3 - auxilliary axis Work range - 400mm Probing system and feed Resolution of linear axes - 0.0005mm Rapid feed of linear axes - 30,000mm/min Resolution of rotary axes - 0.001° Rotation speed of C Axis - 400rpm Rotary axis ( A axis) Standard tip height - 175mm Rotation speed as spindle - 2600rpm Standard interface - ISO SK 50 / centering 70H5 Optional - HSK 100 / 80 / 63 / 50 Tool Changer option HSK50E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 9 / 100mm Outer wheel - 7 / 300mm to 16 / 100mm HSK80E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 8 / 100mm Outer wheel - 7 / 300mm to 14 / 100mm Workpiece size Diameter 340mm Length 550mm Length between tips 500mm Electrical supply Operating voltage 400V / 50Hz fused to 80 A Controller Siemens contouring control - Sinumerik 840 DSL Pneumatics Operating pressure - 6 - 10bar Weight Total weight depending on equipment 10,000kg or more Floor space requirement Length x width (standard) 3227 x 2700mm Height during operation 3550mm Height with option of coolant nozzles 3810mm (min hall height 4100mm)

Condition: excellent (used), Year of construction: 2018, Smooth G control movements: X1/X2-axis: 207 /141 mm Kjdpfjmhihhex Ah Nsdg Y1/Y2-axis: 100/70 mm Z1/Z2-axis: 760/815 mm Max. swing diameter (upper turret) 370 mm Max. swing diameter (lower turret) 320 mm Max. turning diameter (upper turret) 344 mm Max. turning diameter (lower turret) 210 mm Main spindle 26 kW, A2-8spindle nose Main spindle max. speed 4.000 rpm Main spindle max. bar capacity 80 mm Sub spindle 22 kW, A2-6 spindle nose Sub spindle max. speed 5.000 rpm 2 off. 12-station turrets 12 driven tool stations, power output 11 kW Max. speed driven tools 6.000 rpm Airblow upper/lower turret Airblow chuck main spindle Airblow for work transfer Coolant through sub spindle Preparation 8“ chuck sub spindle 10“ thru hole chuck BB210 main spindle Workpiece unloader and conveyor Overload detection Extended memory 8 MB 2 extra m-codes Cylindrical interpolation Auto pecking cycle with load detection Barfeeder interface kit Cromar Series III swarf management - Coolant filter - Swarf conveyor - 2 x 70 bar high pressure pump - 15 bar high pressure pump Mist extractor