Radial Drilling Machine

G.BREDA R 55 2000

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, throat depth: 2,005 mm, drilling capacity: 55 mm, column diameter: 360 mm, spindle speed (max.): 1,200 rpm, stroke length: 855 mm, TECHNICAL DETAILS Drilling capacity in steel (diameter): 55 mm Boring capacity: 80 mm Thread cutting: approx. M40 Arm reach min.: 320 mm Arm reach max.: 2,005 mm Column diameter: 360 mm Boom travel: 855 mm Clamping surface: 1,000 mm - 1,700 mm Automatic feeds: 0.06 - 1.00 mm/rev Spindle speed: 30 - 1,200 rpm Spindle taper: MT 5 Drive power – spindle motor: 400 V / 5.5 kW Quill stroke: 240 mm Spindle to base plate: 1,000 mm - 1,700 mm MACHINE DETAILS Dimensions & Weight Dimensions: 2.99 m x 1.12 m x 2.85 m Machine weight approx.: 4,800 kg Isdpoxn Nbdjfx Ag Iotg EQUIPMENT Electric central clamping Box table Hydraulic vice Coolant device

Condition: used, Year of construction: 1987, pressure / t Ijdpfxsuddcaj Ag Istg stroke / mm table-size / mm weight of the machine ca. 65000 kg Make: Shepherd Type: SVRM 4-roller bending machine: Year of construction: 1986 Working width: 3000cm Smallest pipe diameter with 600 mm roller: Ø 720 mm Smallest tube diameter with 360 mm roller: Ø 460 mm Sheet thickness up to (depending on the material): 50 mm Material SA- 738 B Working width: 2500 mm Material SA- 738 B Material thickness: 35 mm conical bending: Except for the top roller, all rollers can be moved in an inclined position for conical bending. The roller positions can be read on display instruments. For semi-automatic or fully automatic operation of the machine, the bearing jewels of the rollers are equipped with scale bars and slide cams for limit switch actuation. This allows the rollers to return to the same set position over and over again, giving a very high level of uniformity in the shot wefts being bent.

Condition: new, functionality: fully functional, Comparable with Durma, Baykal, Ermaksan, etc. Bending length 3020 mm Pressing force 320 t (also available in many other configurations!) Approach speed 140 mm/s Bending speed max. 10 mm/s Return speed 130 mm/s Y-axis stroke 400 mm Open height 650 mm Throat depth 450 mm Itsdpfx Aeuf Nr Ajg Isg Clear gap between frames 2555 mm Machine length 3785 mm Machine width 2290 mm Width without support arms 1740 mm Overall height 3100 mm Table height 920 mm Motor power 22 kW Oil tank capacity 300 l Machine weight 14,450 kg (Specifications may vary depending on equipment) Standard equipment: 3 CNC axes (Y1, Y2, X) Press beam double-guided, stable and precise Robust double-guided backgauge Backgauge fingers double-guided on linear rails Movable front arms with height adjustment Side and rear safety guards 60mm lower die adapter rail Manual upper tool clamping system (Promecam system) Foot switch with emergency stop 380 V, 50-60 Hz, 3 phase LED lighting Additional equipment: Delem DA 66t CNC control R-axis (backgauge) CNC controlled CNC-controlled crowning Fiessler Akas 2M laser safety device 2 additional backgauge fingers (total 4) 1 set of top and bottom tooling - Further processing lengths and capacities available upon request with appropriate accessories! -

Year of construction: 1963, condition: ready for operation (used), Load: 18t, lifting height: 10,750mm, span: 23,000mm, weight: 35.1t, machine was regularly maintained and inspected. Ijdpfxsh I Edvo Ag Istg

Condition: used, Year of construction: 2006, Radial drilling machine Manufacturer: Valmer Type: TR 80/2500 SP Year of manufacture: 2006 Table dimensions: 1,000 x 800 x 560 mm Maximum drilling diameter: 80 mm Maximum threading diameter: 42 mm Distance between spindle axis and column, maximum: 2,500 mm Distance between spindle axis and column, minimum: 500 mm Head movement, horizontal: 2,000 mm Distance between spindle nose and work surface, maximum: 2,000 mm Distance between spindle nose and work surface, minimum: 550 mm Spindle stroke: 450 mm Morse taper: MT 6 Ijdpfxew Dbgyj Ag Iotg Power: 7.5 kW Machine dimensions: 3,730 x 1,400 x 3,825 mm Weight: 11,000 kg 19526

Condition: new, Sheet width 3100 mm sheet thickness 10 mm cutting angle 2 ° Hold down 14 pieces Stroke rate 13 strokes/min throat 350 mm Oil capacity 260 l Control CYBELEC CybTouch 8 Total power requirement 22 kW Machine weight approx. 10.550 kg space requirement approx. 4000x2250x2050 mm Equipment: - Hydraulic swing cut plate shear Ijdpjk Tzztsfx Ag Ijtg - touch screen controller with digital display for backgauge - automatic cutting gap adjustment via controller - backgauge control 1000 mm travel with ball screws - Swing cut machine with cutting gap adjustment - 2 backgauge arms - 1 side stop - light barrier behind the machine - cutting length limitation - cutting line illumination - chrome steel knives - ball rollers in the table - hinged finger guard with limit switch - foot switch - CE-sign / declaration of conformity - Operating instructions in German

Year of construction: 1981, condition: used, pressure 40 t distance between columns 600 mm stroke 160 mm Iedpfx Agob U Hw Te Ijtg table-size 560 x 400 mm dayligth 360 mm ram hole 40 H 7 DIN 810 mm oil volume 500 l return speed 200 mm/sec die cushion hydr. pressure/stroke 60 capacity of ejector 25 t total power requirement 15 kW dimensions of the machine ca. 1.44 x 0.95 x 2.54 m pressing speed 27 mm/sec return speed 200 mm/min

Condition: used, Machine not operational – control system not running Special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Serial No. 300487 Year of manufacture: 2006 Pressing force: 500 tons Column gap front and rear: 2520 mm Table surface: 2500 x 2500 mm Ram surface: 2500 x 2500 mm Ram stroke: 600 mm Installation height max.: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ijdpfxedzqptj Ag Iotg Ram retraction force: approx. 22 tons Adjustable approach speed: 100-800 mm/s Pressurization to 5000 kN: approx. 0.7 sec. Return speed: approx. 300 mm/s Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-position flat guide for the ram - Hydraulic ram locking at TDC - Freestanding control cabinet (200 x 50 cm) - Siemens PLC control S7-314 - Operation via Siemens OP 170-B (5.7”) - Two-hand control desk, freestanding - Floor-level installation - Table plate 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication - Operating manual with circuit diagrams Required space (L x W x H): 372 x 260 x 460 cm Required space for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition.

Condition: used, Vertical band saw MÖSSNER REKORD type SM 420 Machine No. 17010 Year of construction 1968 roll diameter 420 mm throat width 415 mm throat in height 265 mm Isdpfx Ajdzqc Reg Iotg table size 605 x 600 mm band speed 18 - 562 m/min. 8 steps saw band length min/max. 3150 / 3260 mm drive power 1,1 / 1,7 kW Mains connection 380 V 50 Hz - Saw band speed via 4 gear steps and 2 motor speeds - saw blade butt welding unit IDEAL BS 0-16 with shear and grinding stone - swivelling working table in 2 axes space requirement L x W x H 950 x 750 x 1900 mm weight 570 kg good condition

Condition: good (used), Year of construction: 1985, CNC Lathe Iedpoqc Ul Ajfx Ag Ietg GILDEMEISTER Type: N.E.F. 1020 Year 1985 Control EPL 2 Turning diameter over bed : 1020 mm Turning diameter over face plates : 600 mm Turning length : 3000 mm Spindle speed : 5 - 1120 rpm Motorl.30 KW Spindle bore : 128 mm Tool turret Parat size : 4 with 10 holders Faceplate : 900 mm, steady rest, drill stand, chip conveyor, complete machine documentation and parameters available. Machine disassembled in stock. Complete weight approx. 12 000 KG. Further data see data sheets .