Injection molding machine

FANUC Roboshot S100iB 125ton FULL ELECTRIC

Condition: new, Year of construction: 2026, load capacity: 3,500 kg, lifting height: 5,000 mm, free lift: 5,000 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, construction height: 2,550 mm, motor manufacturer: Yunnei EUR5 2,7L, fork length: 2,000 mm, overall weight: 4,400 kg, empty load weight: 4,400 kg, total height: 2,550 mm, total width: 1,800 mm, color: blue, Equipment: CE marking, air conditioning, all wheel drive, cabin, fork extension, front guard, lighting, pallet forks, sideshift, trailer coupling, I have a 3.5T rough terrain forklift for sale with a permanent 4x4 drive. EUR5 Yunnei DEF20CAF4 Dieselmotor 55kW 75KM Air-conditioned cab The truck is equipped with: - Triplex mast, 5m lift height - Fork side shift - Fork positioner - Carriage width: 1500mm - 1220mm long forks - Additional 2000mm long forks included - Pneumatic tires, size: 20.5/70/16 Truck dimensions: 370cm long, 180cm wide, 255cm high Truck weight: 4400kg option to purchase a 1800mm wide hydraulic bucket Rcsdpjxa Anhefx Apdjh as a direct importer, we provide access to spare parts !!! Forklift price: 19800 EUR EXW PayPal payment available

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: G551-1586, travel distance X-axis: 800 mm, travel distance Y-axis: 770 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 16,000 rpm, position of the milling head: Horizontal, table load: 1,000 kg, overall weight: 22 kg, input voltage: 400 V, Equipment: documentation/manual, GROB G550 / G551 5-axis machining center with TM167 tool magazine and Schuler LoadMaster LMC 900 Price upon request Important conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end-users/manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany or the EU • Inclusion of a dual-use statement in the purchase agreement (legally required) Sales/Transfer conditions: • Dismantling, removal, and transport are the responsibility of and at the risk of the buyer. • The buyer is responsible for personnel, tools, and transport equipment. Personnel may only work with appropriate personal protective equipment, and only trained personnel may be used. Technical data Manufacturer: GROB-WERKE GmbH & Co. KG Model: G550 / G551-1586 Machine type: 5-axis universal machining center Rcedpozxf Hksfx Apdoh Year of construction: 2015 Control system: Siemens Sinumerik 840D Axes: 5 Tool holder: HSK-A63 Spindle speed: 16,000 min⁻¹ Spindle power: 35 kW Spindle hours: approx. 19,125 h X-axis: 800 mm Y-axis: 770 mm Z-axis: 500 mm Measuring probe: Renishaw IKZ: 70 bar Tool management GROB TM167 additional tool magazine Year of construction: 2021 167 additional tool positions Total number of tool positions: 287 Fully integrated into the system Automation Schuler Automation LoadMaster LMC 900 Year of construction: 2015 Linear pallet changing system 9 pallet positions Beckhoff/TwinCAT control System is fully functional and ready for operation Condition The production cell is in good condition and has been in continuous operation. The machine has a relatively low number of spindle hours and is equipped with a TM167 additional magazine installed in 2021. According to the operator, there are no known defects. The system is ideally suited for the automated production of demanding 5-axis components in the following areas: Mechanical engineering Automotive industry Aerospace Medical technology Tool and mold making Scope of supply GROB G550 / G551 machining center GROB TM167 tool additional magazine Schuler LoadMaster LMC 900 9 pallets Documentation Inspection Inspection possible by appointment. The machine can be inspected while powered on. Location: Germany / Waiblingen If you are interested, we look forward to hearing from you so that we can discuss the further details. Keywords GROB G550, GROB G551, 5-axis machining center, Siemens 840D, TM167, tool magazine, Schuler LoadMaster, LMC900, pallet automation, HSK63, CNC machining center, 5 Axis Machining Center.

Condition: excellent (used), Year of construction: 2008, Injection molding machine BATTENFELD HM 60/350 S Year of manufacture: 2008 Injection elements: Screw diameter: 35 mm Injection weight : 153.8 g Injection pressure: 2083 bar Injection volume: 169 ccm Closure elements: Closing force : 60 t Clearance between columns: 370x320 mm Dimensions of table plates max: 550x530 mm Ejector: hydraulic Closing system: hydraulic Control: UNILOG B6 Additional equipment: Machine in very good technical condition Euromap 67 Dimensions: Weight: 3100 kg Length/Width/Height: 3.79x1.24x1.88 m Power supply: Rcedpfx Ask Rnq Nspdjh Pump/motor: 15 kW Heaters: 10.4 kW Total: 25.4 kW

Condition: new, Year of construction: 2025, Delivery ex works Turkey Bending length (A): 3050 mm Press force: 170 tons Sheet thickness 42kgf / mm: 8 mm Sheet thickness 72kgf / mm: 4 mm Upper tool: 1260 Top Tool 85 ° Lower tool: 50, 35, 22, 16 Distance between columns (B): 2550 mm Forward speed: 130 mm / s Working speed: 8 mm / s Retraction speed: 120 mm / s Crowning: manual (CNC-motorized available for an extra charge) X-axis travel: 750 mm X-axis speed: 250 mm / s Backgauge fingers: 2 pieces Front support arms: 2 pieces Oil tank capacity: 180 liters Main motor power: 11 kW Stroke length (C): 265 mm Installation height (D): 450 mm Projection stand (E): 410 mm Table height (F): 870 mm Table width (G): 170 mm Length (L): 4200 mm Height (H): 2800 mm Width (W): 2200 mm Weight: approx. 7500 kg Cybelec Cybtouch 12 2D Graphic CNC control 3 axes (Y1, Y2, X) expandable with optional R+Z-Axis Eurostamp 2067 lower tool (V: 50, 35, 22, 16) Eurostamp 1260 upper tool 85 ° Narrow table All-steel welded construction Promecam quick clamping system CNC-controlled motorized backgauge (X: 750 mm) Adjustable backgauge fingers Inch and metric system can be selected Ground and chrome-plated cylinders Swiveling control panel Foot control with anti-panic stop & emergency shutdown Lateral protective grille (secured with limit switch) Light curtain on the back of the machine (900 mm) DSP laser finger protection system at the front (CE) BOSCH / REXROTH or HOERBIGER / HAWE hydraulic system BOSCH / REXROTH or ECKERLE hydraulic pump Slidable front support arms (2 pieces) Electronics unit from: SIEMENS, SCHNEIDER, DELTA, ABB, OMRON 380 V 50 Hz Rsdpfegu N Aljx Apdsch Painting: RAL 7035, RAL 5015 Optional special accessories available at an additional cost: -CNC-controlled R-axis (250 mm) -CNC motorized crowning -Servo driven motors backgauge system for X + R axis (Mitsubishi) -Painting in special colors on customer request Documentation in German or English CE conformity

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036946, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, injection weight: 183 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,850 mm, overall weight: 5,600 kg, heating capacity: 11.5 kW (15.64 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (order 38670023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 40 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1860  Stroke volume cm³ 201  Shot weight at max. stroke for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticizing flow (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heat output kW 11.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. Rcsdeud H Dmopfx Apdjh We look forward to your inquiry.

Condition: like new (used), Year of construction: 2023, Technical Data: Maximum clamping force: 3,500 kN Maximum locking force: 3,850 kN Opening stroke: 725 mm Minimum mold installation height: 400 mm Maximum mold installation height: 900 mm (extended) Clamping plate dimensions (h x v): 1,168 x 1,144 mm Clear tie bar spacing (width x height): 830 x 830 mm Maximum mold weight: 6,600 kg Maximum weight on moving platen: 3,800 kg Maximum weight on fixed platen: 5,100 kg Ejector stroke: 250 mm Rcedoy Hmfyspfx Apdjh Ejector force (increased): 100 kN Max. ejector speed: 270 mm Screw diameter: 60 mm Injection pressure: 2,426 bar Max. injection volume: 891 cm³ Max. injection speed: 160 mm/s Max. dosing stroke: 315 mm Max. nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure over dosing stroke programmable Installed cylinder heating: 23.1 kW Material hopper capacity: 110 l Machine weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Model: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demolding stroke Y-axis: 900 mm Vertical demolding stroke X-axis: 1,800 mm Robot console on fixed platen Gripper function R1 (C) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg MuCell Integration: The special option includes: • Plasticizing cylinder with pneumatic shut-off nozzle without mixing element and without non-return valve; • Interface (communication, emergency stop interface); • Software with functional display pages for controlling the MuCell function; • Adapted nozzle guard; • Position-controlled high-speed screw (analog ZE388) Conveyor belt: Width: 870 mm Usable width: 800 mm Length: 3,500 mm Height: 880 - 1,220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Clear tunnel height: 500 mm This injection molding machine is fully equipped!! Condition: As new condition, only 5,290 operating hours.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Heyligenstaedt Heynumill 2700-PF 3/5-axis CNC gantry milling machine with integrated C-axis and interchangeable milling heads. Control: Heidenhain TNC 430 X-axis Y-axis Z-axis 3,000 mm 4,000 mm 1,500 mm In 2018, the Heynumill underwent a complete overhaul of the hydraulic system, replacement of all electrical cables, renewal of the spindle cooling unit, both longitudinal conveyors were replaced, and the milling heads were completely refurbished. The entire refurbishment cost €160,000. Rcsdpfx Apjyaazmjdeh In 2020, the milling gearbox was renewed.

Condition: used, Year of construction: 2018, travel distance X-axis: 2,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,000 mm, table length: 2,300 mm, table width: 1,600 mm, spindle speed (max.): 10,000 rpm, spindle nose: SK 50, Used CNC portal milling machine KRAFT VM-2018B with Heidenhain TNC 620 Year of manufacture: 2018 Storage location: Germany Rjdpfxowkg T Se Apdoch Delivery time: short term Payment: 100% before loading Warranty: none Machine description The KRAFT VM-2018B is a precise and powerful CNC portal milling machine with HEIDENHAIN TNC 620 control, ideal for heavy-duty and high-precision machining processes. Thanks to its robust design and high-quality components, it is ideal for demanding milling tasks in tool and mold making as well as in series production. Highlights & features Monoblock cast iron bed and cross beam for maximum rigidity and precision FEM-optimized machine design BF gearbox with 26 kW motor for high torque (662 Nm) Feed roller linear guides P-class (very low coefficient of friction 0.003-0.006) C3 ball screws with double nut - high load capacity & accuracy Spindle: SK50, 10. 000 rpm, direct drive Heidenhain TNC 620 control Spindle cooling & IKZ 20 bar Coolant system, oil separator, air conditioning for control cabinet Full enclosure, TÜV-approved, CE-compliant Technical data Travel (X/Y/Z): 2,300 / 2,000 / 1,000 mm Table size: 2,300 × 1,600 mm T-slots: 8 × 22 × 180 mm Max. Table load: 8 t Distance spindle nose - table: 180-1,180 mm Rapid traverse X/Y: 20,000 mm/min Rapid traverse Z: 15,000 mm/min Feed range: 1-10,000 mm/min Positioning accuracy (VDI/DGQ3441): 0.020

Condition: like new (used), Year of construction: 2006, operating hours: 33,107 h, functionality: fully functional, Equipment: documentation/manual, Top machine from cleanroom manufacturing (pharmaceutical industry) The machine can be inspected while powered on, by arrangement. Technical data Manufacturer: Engel Type: V 330H/80V/130 Combi 2-color with rotary table Serial number: 162036 Year of manufacture: 2006 Operating hours: 33107 h Control: CC 200 Extras - with rotary table, 820 mm diameter - with GEKU robot SR 500 ST x=600 y=1400 z=2500 mm - only 33,107 operating hours - protective enclosure/safety cage - horizontal conveyor belt - hardly any paint damage / almost new condition - fully functional Dimensions L/W/H: see drawing Weight: 10600 kg Functionality: fully operational Condition: excellent Clamping unit Clamping unit: hydraulic Clamping force: 1300 kN / 130 tons Tie bar distance: tie-bar-less Opening stroke: 606 mm Tool installation height: 250 mm Centering: 125 mm Platen distance max: 850 mm Platen size: 750 mm / 850 mm (W x H) Injection unit 2K Screw diameter: 25 / 22 mm Injection weight: 72/ 35 gr. Injection pressure: 2391/ 2066 bar Injection volume: 79 / 38 ccm Ejection stroke / force: 61 kN / 100 mm Rodpoub Umqofx Apdjch GEKU robot details SR 500 ST Control: Simotion X-axis: 600 mm Y-axis: 1400 mm vertical Z-axis: 2500 mm horizontal A-swivel axis: SWM 45 C-axis: servo Gripper: SWS16 B-axis: not available The machine is immediately available in our warehouse in Hanover/Germany and has been tested. Warranty Warranty until the first commissioning Loading/shipping Free loading onto the buyer's truck or free delivery to your location against reimbursement of shipping costs / worldwide delivery possible from our warehouse in Hanover / Germany Financing - upon request - lease-purchase option Price: upon request

Condition: used, Year of construction: 2012, controller manufacturer: Heidenhain, controller model: iTNC 530, _____ Description: Year of manuf. : 2012 Control : Heidenhain iTNC 530 Speed : 18000 rpm Movement X/Y/Z : 3600/1100/900 mm Tool holder : HSK 63 In General: Year of manufacture:2012 Control system:Heidenhain iTNC 530 Travel range X/Y/Z:3,600/1,100/900 mm Speed:18,000 rpm Tool holder:HSK 63 Spindle: Technology:Motorised spindle Rodpfez S S Elox Apdjch Speed:18,000 rpm Max. power:35 kW Max. torque:130 Nm Tool holder:HSK 63 NC swivel head: B-axis:+/- 100° Resolution:0.001° NC rotary table: C-axis:360° Resolution:0.001° Clamping surface:1,050 mm Max. table load:1,200 kg Fixed table: Clamping area:4,200 x 1,100 mm Max. table load:1,200 kg/m Tool magazin: Technology:Chain magazine Number of stations:60 Tool changer:Double gripper Max. tool length:300 mm Max. tool diameter:80 (130) mm Equipment: Positioning sensors:Direct scales X-Axis:Direct drive Chip removal:Chip conveyor Coolant supply:Internal cooling system, 40 bar Tool measurement:LASER Workpiece measurement:Touch probe Set-up:Electronic handwheel