FANUC Roboshot S100iA

FANUC Roboshot S100iA

Year of construction: 2014, operating hours: 44,382 h, condition: ready for operation (used), controller manufacturer: FANUC, overall weight: 4,400 kg, screw diameter: 26 mm, This FANUC Roboshot S100iA was manufactured in 2014. It features a closing force of 100 tons and a screw diameter of 26mm. Weighing 4.4 tons, it operates on a power supply of 200 V~50/60 Hz or 220 V~60 Hz. Consider the opportunity to buy this FANUC Roboshot S100iA electrical injection moulding machine. Contact us for more information. • Power supply: 200 V AC, 50/60 Hz; 220 V AC, 60 Hz Lsdjyam Hcepfx Ad Njhb

Condition: like new (used), Year of construction: 2015, Arburg 320 C 500-170 (2015) Golden edition Working hours : 40.167 h Clamping force: 50 t Screw diameter : 30 mm Clamping force: 500 kN Distance between tie bars: 320 × 320 mm Platen size (H × V): 446 × 446 mm Minimum mould height: 200 mm Maximum daylight opening: 550 mm Ejector stroke: 125 mm Screw diameter: 30 mm Maximum shot volume: 85 cm³ Maximum shot weight (PS): 77 g Injection pressure: 2000 bar Screw speed max: 400 r/min Nozzle stroke: 250 mm Nozzle contact pressure: 40.6 kN Heating capacity: 9.4 kW Pump drive power: 11 kW Total installed power: approx. 20.5 kW Machine length: approx. 3.4 m Machine width: approx. 1.4 m Machine height: approx. 2.0 m Machine weight: approx. 2 400 kg 2 pumps machine Machine Equipment / Configuration Control system: Selogica Direct controller Hydraulic system: Dual-pump hydraulic system Injection Unit Thermoplastics injection unit, 30 mm screw, high wear resistant design Standard screw coupling with flat-ended geometry Open nozzle, 30 mm Nozzle tip for open nozzle Heater band for open nozzle Clamping Unit Mounting platen set, central diameter 125 mm Ledsxqdxispfx Ad Nehb Core pull 1, for serial movement, holding pressure via check valve Interfaces & Connectivity Robot interface EUROMAP 67 (50-pin) Interface for electrical safety interlock on safety door EUROMAP 73

Year of construction: 2016, condition: ready for operation (used), controller manufacturer: FANUC, screw diameter: 26 mm, This FANUC Roboshot S100iA was manufactured in 2021. It features a 100 ton clamping force, ideal for precision electrical injection moulding. Consider the opportunity to buy this FANUC Roboshot S100iA electrical injection moulding machine. Contact us for more information. Ljdpsyam E Ssfx Ad Njhb • 35,099h = screw diameter 32 mm • 32,691h = screw diameter 32 mm • 29,023h = screw diameter 26 mm

Condition: ready for operation (used), Year of construction: 2015, operating hours: 47,176 h, screw diameter: 26 mm, overall weight: 4,400 kg, controller manufacturer: FANUC, This FANUC Roboshot S100iA was manufactured in 2015. It's an electrical injection moulding machine with a closing force of 100t and a screw diameter of 26mm. Weighing 4.4 tons, it operates on a power supply of 200 V∼50/60 Hz or 220 V∼60 Hz. Consider the opportunity to buy this FANUC Roboshot S100iA electrical injection moulding machine. Contact us for more information. Ledox D Rz Depfx Ad Nshb 2x similar units availabe (47176 + 49071 h) • POWER SUPPLY 200 V∼50/60 Hz, 220 V∼60 Hz

Condition: like new (used), Year of construction: 2014, Arburg 320 C 500-170 (2014) Working hours : 44.124 h Clamping force: 50 t Screw diameter : 25 mm Shot weight : 75 g Clamping force: 500 kN Distance between tie bars: 320 × 320 mm Platen size (H × V): 446 × 446 mm Minimum mould height: 200 mm Lsdpfoxqdtasx Ad Nohb Maximum daylight opening: 550 mm Ejector stroke: 125 mm Screw diameter: 30 mm Maximum shot volume: 85 cm³ Maximum shot weight (PS): 77 g Injection pressure: 2000 bar Screw speed max: 400 r/min Nozzle stroke: 250 mm Nozzle contact pressure: 40.6 kN Heating capacity: 9.4 kW Pump drive power: 11 kW Total installed power: approx. 20.5 kW L 3.4 m x W 1.4 m x H 2.0 m Weight :2 400 kg Injection Unit Thermoplastics injection unit, 25 mm screw, high wear-resistant design Standard screw coupling with flat-ended geometry Open nozzle, 25 mm Nozzle tip for open nozzle Heater band for open nozzle Clamping Unit Mounting platen set, central diameter 125 mm Core pull 1, serial movement, holding pressure via check valve Hydraulic ejector Ejector quick-coupling Connector for ejector platen protection

Condition: ready for operation (used), Year of construction: 2021, operating hours: 4,421 h, Control Unit Brand FANUC Clamping Unit Clamping force 100t This FANUC ROBOSHOT S100iA was manufactured in 2021. It's an electrical injection moulding machine featuring screw diameters of 26 mm, 32 mm, and 36 mm. Operating hours range from 4,421 to 18,606. Consider the opportunity to buy this FANUC ROBOSHOT S100iA electrical injection moulding machine. Contact us for more information. Lhsdpfsx D R E Asx Ad Njb Application Types Injection Moulding

Condition: like new (used), Year of construction: 2017, Vertical Arburg Schiebetisch 375 V 500-100 (2017, working hours: 19.719) Clamping unit: 50 ton Oppening stroke (max. kN/mm) : 30 / 250 Mould height (fixed/variable) min.-max. mm: ---/172/272 Lhedju Ep Imopfx Ad Neb Platen daylight (fixed/variable) max. mm: ---/422-522 Shuttle table stroke: 650 mm Screw diameter: 20 mm Injection volume: 31 cm3 Shot weight: 29 g Injection pressure: 2.500 bar Working hours: 19.719 Equipment: 3x hot runner 1x hydraulic core puller 1x pneumatic core puller