Electrical Injection Moulding Machine

FANUC ROBOSHOT S 100 iA

Year of construction: 2014, operating hours: 44,382 h, condition: ready for operation (used), controller manufacturer: FANUC, overall weight: 4,400 kg, screw diameter: 26 mm, This FANUC Roboshot S100iA was manufactured in 2014. It features a closing force of 100 tons and a screw diameter of 26mm. Weighing 4.4 tons, it operates on a power supply of 200 V~50/60 Hz or 220 V~60 Hz. Consider the opportunity to buy this FANUC Roboshot S100iA electrical injection moulding machine. Contact us for more information. • Power supply: 200 V AC, 50/60 Hz; 220 V AC, 60 Hz Kedpfx Ajyam Hcjd Nswt

Condition: used, Year of construction: 2019, Year: 2017 Control type: CC300 Number of hours: 20,000H Storage location: MECA PLASTIC Deadline: AVAILABLE Closing force: 160 T Opening stroke: 460 mm Between columns: 520 mm x 520 mm Plate dimensions: 760 mm x 760 mm Minimum/maximum mold: 250/600 mm Maximum spacing between plates: 1060 mm Screw diameter: 35 mm Screw length: 20T cm3: 154 Bars: 2000 Motor power: 21 kW Heating power: 9.2 kW Closing weight: 8.4 T Length dimensions: 5.90 m Width dimensions: 1.70 m Height dimensions: 2.20 m Cores: NO Kedpfx Adev I Uw Is Newt Robot interface: YES Bi-metal: YES

Year of construction: 2016, condition: ready for operation (used), controller manufacturer: FANUC, screw diameter: 26 mm, This FANUC Roboshot S100iA was manufactured in 2021. It features a 100 ton clamping force, ideal for precision electrical injection moulding. Consider the opportunity to buy this FANUC Roboshot S100iA electrical injection moulding machine. Contact us for more information. Kwjdpfxoyam E So Ad Njt • 35,099h = screw diameter 32 mm • 32,691h = screw diameter 32 mm • 29,023h = screw diameter 26 mm

Condition: ready for operation (used), Year of construction: 2015, operating hours: 47,176 h, screw diameter: 26 mm, overall weight: 4,400 kg, controller manufacturer: FANUC, This FANUC Roboshot S100iA was manufactured in 2015. It's an electrical injection moulding machine with a closing force of 100t and a screw diameter of 26mm. Weighing 4.4 tons, it operates on a power supply of 200 V∼50/60 Hz or 220 V∼60 Hz. Consider the opportunity to buy this FANUC Roboshot S100iA electrical injection moulding machine. Contact us for more information. 2x similar units availabe (47176 + 49071 h) Kedpfxex D Rz Ds Ad Nswt • POWER SUPPLY 200 V∼50/60 Hz, 220 V∼60 Hz

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036936, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 1,837 bar, injection weight: 123 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,820 mm, overall weight: 5,900 kg, heating capacity: 8.9 kW (12.10 HP), drive type: Vollelektrisch, clear span: 470 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: Kjdpfx Aouggb Dod Njwt KM 80 / 250 PA G01 (order 38670013) (machine no.: 61036936, new, year of manufacture 2023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 35 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1837  Stroke volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticizing flow (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heat output kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Electrical preparation for hydraulic auxiliary unit  Euromap interfaces handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package  Swivel device Injection unit The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 33,501 h, screw diameter: 16 mm, overall weight: 4,400 kg, controller manufacturer: FANUC, This FANUC Roboshot S100iA was manufactured in 2016. It's an electrical injection moulding machine with a closing force of 50 tons and a screw diameter of 16/20mm. It operates on a power supply of 200 V∼50/60 Hz or 220 V∼60 Hz. Consider the opportunity to buy this FANUC Roboshot S100iA electrical injection moulding machine. Contact us for more information. • Power supply: 200 V, 50/60 Hz; 220 V, 60 Hz • Full load amps (FLA): 54.6 A • Short-circuit current rating (SCCR): 5 kA Kwodpfx Adsx D Rzdj Njt

Condition: new, Year of construction: 2023, operating hours: 50 h, Brand: Dr.Boy Model: 60E Year of construction: 2023 Operating hours: 50 Screw diameter: 32 mm Max. injection pressure: 2,142 bar Max. shot volume: 100.5 cm³ Clamping force: 60 t Max. distance between tie-bars: 360 x 335 mm Min. mould height: 250 mm Max. distance between platens: 650 mm Dimensions: 3,450 x 1,150 x 1,950 mm Weight: 2,250 kg Options: • Procan ALPHA 4 display • Hydraulic core pull (2x) • Air valve (2x) • Interface package (incl. RS232/485, OPC-UA + licence fee) • 4 Freely programmable AIO's • Robot interface Euromap 67 • Interface between safety fence and machine Euromap 78 • Colouring contact interface • Quick change mould package – Cooling circuits (3x) on fixed and moving platen – 8-way water manifold – Ejector with quick coupling – Open nozzle with threaded tip • 6-way energy distribution box (supply via second cable) – 3x 400V – 3x 220V • Oil filling (Econfluid, ISO-32) Kedpfjx Aphtox Ad Newt

Condition: good (used), Side channel compressor, side channel blower, ring blower, vacuum pump, blower Kwodpfxewncvws Ad Not -Manufacturer: Gardner Denver Siemens, Elmo Rietschle Side channel blowers Side channel compressors -Type: G 200 2BH1800-7AH17 -Drive: 5.5 kW -Speed: 2900 rpm -Negative pressure: -300 300 mBar -Dimensions total: 495/480/H525 mm -Weight: 129 kg

Condition: like new (used), Year of construction: 2019, operating hours: 11,337 h, functionality: fully functional, machine/vehicle number: 234917, clamping force: 1,600 kN, screw diameter: 30 mm, Equipment: documentation/manual, Only 11,300 operating hours!!!!! ENGEL 160 ton injection moulding machine with 30mm screw diameter and extensive additional equipment – from cleanroom production Kwedewb Dl Tjpfx Ad Njt For sale is a very well-maintained injection moulding machine with numerous extra features. The machine comes from a cleanroom environment and has been operated exclusively with PP material – as a result, the screw and the entire machine are in almost mint condition. Highlights: - Extensive special equipment - Exclusive operation with PP - Exceptionally clean condition – meticulously maintained The order confirmation from ENGEL can be found below in the documents. If I had more time, I wouldn't sell the machine at this price. The original price was €340,000 (without crane). The crane is, of course, included in our price!

Condition: new, Year of construction: 2021, Equipment: documentation/manual, Fanuc Roboshot 𝛼-S100𝑖B (2021) with Warranty! Clamping force: 100 t Tie bar distance: 460x410 mm Platen size: 660x610 mm Screw diameter: 28 mm (up to 30% glass resistant) Injection volume: 58 cm3 Injection speed: 350mm/s Type: Horizontal Drive: Electric Hours: 35 (only!) Possible to buy another screw diameter on request: 36mm or 40 mm screw More information on request. Kwsdpfsx Elvujx Ad Njt 12 months Warranty in price.