Three rolls angle roll W=720 cm³

Faccin RCMI 280

Condition: good (used), Year of construction: 1997, Ref. -No.: 10620 Manufacturer: SKODA Type: W 200 T Year of construction: 1997 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840 Storage location: Halberstadt Country of origin: Germany X-Travel: 16000 mm Y-Travel: 5150 mm Z-Travel: 1600 mm W-Axis: 2100 mm V-axis: 2000 mm B-Axis: 0 - 360 ° Iedeyagidopfx Afujba Spindle Diameter: 200 mm Table Load: 80.000 kg Tool Taper: SK 60 / SK 50 Turning Speeds: 1000 RPM Rotary table diameter: 3500 x 3000 mm Further information: Including angle head Machine can be inspected under power.

Condition: new, Year of construction: 2025, functionality: fully functional, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. Iedpjrq D Niofx Afuoba The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Condition: new, functionality: fully functional, Year of construction: 2024, shaft diameter: 50 mm, roller diameter: 155 mm, overall weight: 400 kg, power: 1.5 kW (2.04 HP), input voltage: 400 V, Equipment: documentation/manual, emergency stop, Brand: Sahinler Model: PK 35 Year of manufacture: 2024, unused Capacity (kW): 1.5 Voltage: 400 Frequency (Hz): 50 Dimensions LxWxH (mm): 1000 x 750 x 1400 Ijdpfswt Sy Ajx Afuoba Weight (kg) approx.: 400 Units in stock: 4 Manufactured in: Turkey Ø Diameter (mm): 50 Comments: Unused machines at competitive prices, multiple units in stock, foot pedal included.

Condition: good (used), functionality: fully functional, 840mm x 3,500mm, swing over cross slide 530mm, spindle bore 82mm, 7,1-900 Rpm, 18,5Kw, steadys, 4-jaw plate, DRO. Ibsdoxqxvvspfx Afuoa

Condition: as good as new (ex-display), MIG/MAG welding machine with inverter technology. Three-phase power supply, welding machine. Master Software TERRA PME included. Technical data Power Supply: Voltage (50/60 Hz): 3x400V ±15% Maximum input power: 22.9 kVA Maximum input current: 31.1 A Power factor PF: 0.73 Efficiency: 89% Slow-blow fuse: 25 A Open-circuit voltage: 61Vdc IP protection class: IP23S Ibodpfx Ajw Rm Sasfuoa Insulation class: H Power cable: 4x3mm² – 5 m Welding: Setting range: 3–400A Duty cycle MIG/MAG at 40°C: 40% – 400A, 100% – 330A Duty cycle MIG/MAG at 25°C: 100% – 400A Wire diameter: 1.0–1.2 mm (optional 0.6–1.6 mm) Flux-cored wire diameter: 0.9–2.4 mm Aluminum wire diameter: 0.8–1.6 mm Wire feed speed: 0.5–22.0 m/min Wire spool diameter: Ø 200/300 mm Remote control connection: yes

Condition: new, functionality: fully functional, Year of construction: 2026, roller (bottom) diameter: 310 mm, roller (top) diameter: 320 mm, roller diameter: 310 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness steel (max.): 38 mm, overall weight: 12,500 kg, total length: 4,500 mm, total width: 2,300 mm, total height: 1,740 mm, power: 18.39 kW (25.00 HP), working length: 1,500 mm, Equipment: documentation/manual, emergency stop, FACCIN HAV 15342 variable three-roll bending machine Electronically controlled, hydraulic three-roll bending machine Technical data: Number of rollers: Three Geometry of the side rollers: variable Working width: 1550 mm Top roller diameter: 320 mm Side roller diameter: 310 mm Pressure force against the top roller: 160 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 18 kW (25 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 12,500 kg Length: 4,500 mm Width: 2,300 mm Height: 1,700 mm Guaranteed performance: for material with yield strength 260 N/mm² Rolling capacity (full working width) 38 mm Bending capacity (full working width) 20 mm from pipe diameter 1,600 mm Rolling capacity (full working width) 30 mm Bending capacity (full working width) 17 mm from pipe diameter 415 mm Standard equipment: Variable geometry with linear guides for roller movement Extra long folding bearing for increased frame stability Electronic parallelism system EPS Hardened rollers for high wear protection All rollers ground after heat treatment Ibsdpfjt Akt Rox Afuea Siemens S7-HMI PLC control system PGS-CLASSIC control system with Siemens touch panel Hitech hydraulic and electrical package Simultaneous rotation and roller movement Safety ripcord with emergency stop and CE certification Central lubrication Water cooling for the hydraulics Cone bending device Prepared for retrofitting of supports and roller conveyors FACCIN Advantage Package AP

Condition: used, Year of construction: 1997, The bending press was manufactured in 1997 in England by EDWARDS PEARSON. The folding press is in good condition, sold with tools. Always serviced and maintained on time. The machine tools are connected and can be tested and inspected. Specification: Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Working length: 3 100 mm Ibodpferfx Utex Afuja Bending capacity: 100 T Travel: 172 mm Distance between table and frame: 450 mm Working speed: 100 mm/s Return speed: 110 mm/s Axes: auto X1, X2, Y1, Y2, Z1 , Z2 , R Tools: Available Weight: 7 T Other: New screen recently replaced, keyboard attached for ease of use. If you have more questions, we will be happy to answer.

Condition: used, material width 300 mm coil weight 3 t Ibjdpfxjcdrmme Afuoa material thickness 2 - 4 mm Straightener, 7 rolls, Make. Schleicher, Type RM 6-95/160 - band width 300 mm - band thickness 2 – 4 mm - cross cut 1200 mm² - voltage 220/380 V 50 Hz - total power requirement 3,1 kW coiler with press roll, Make Schleicher, Type H-3 - Coil weight 3 t - Band width 400 mm - voltage 220/380 V 50 Hz - total power requirement 3,92 kW without control

Condition: new, Year of construction: 2026, roller (bottom) diameter: 220 mm, roller (top) diameter: 220 mm, side roll diameter: 180 mm, roller diameter: 220 mm, roller length: 2,070 mm, sheet thickness steel (max.): 10 mm, empty load weight: 4,500 kg, - 4 rolls - Capacity: 2070 x 10 mm - Bending capacity: 2070 x 8 mm - Hardened rolls - Top roll diameter: 220 mm - Bottom roll diameter: 220 mm - Side roll diameter: 180 mm - Hydraulic - Digital display for left roll movement - Digital display for central lower roll movement - Digital display for right roll movement - Hydraulic up and down movement system with intermediate and central roll - Hydraulic indicator for easy roll positioning - Hydraulic up and down movement system with intermediate and central roll - Top roll hydraulically swing-out - Steel construction ST-52 Iodpfx Afer H Df Ioujba - Hydraulic drop-end for easy roll positioning - Hydraulic up and down movement system with central and side rolls - Hydraulic balancing system - Overvoltage protection - Documentation - 400V

Condition: used, Year of construction: 2010, operating hours: 11,780 h, Equipment: ABS, all wheel drive, Volvo EXCAVATOR EW140C air conditioning 16,850 kg 91 kW Top condition Ibjdpfxsyltr Ao Afuoa