Round bending machine

Ostas 4R OHS 2070 x 220

Condition: new, Year of construction: 2026, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 220 mm, roller (top) diameter: 220 mm, side roll diameter: 180 mm, roller diameter: 220 mm, roller length: 2,070 mm, sheet thickness steel (max.): 10 mm, overall weight: 4,900 kg, total length: 4,050 mm, total width: 1,550 mm, total height: 1,470 mm, input voltage: 400 V, number of digital displays: 3, Equipment: centralized greasing system, cone bending device, documentation/manual, emergency stop, hardened rollers, - 4 rolls - Capacity 2070 x 10 - Bending capacity 2070 x 8 - Hardened rollers - Diameter above roller 220 mm - Diameter under the roll 220 mm - Side roller diameter 180 mm - Hydraulic - Digital display for the left roller movement - Digital display for the movement of the lower middle roller - Digital display for the movement of the right-hand roller - The top roller can be folded out hydraulically - Steel construction ST-52 - Hydraulic drop end for easy roller positioning - Hydraulic up and down movement system with center and side rollers - Hydraulic balancing system Godpfx Asu Evqhjcwsbk - Overload protection - Documentation - 400V

Condition: used, Technical details: x-travel: 762 mm y-travel: 382 mm z-travel: 419 mm tool taper: Sk 40 table surface area: 1070 x 230 mm range of revolution per miute: 60 - 4.200 U/min feed continuous: 0,038/0,073/0,120 in 3 steps mm/min spindle stroke: 120 mm spindle taper: Iso 40 Gbsdpfx Aceva Evfjwsk spindle head swivable left - right: 90 ° weight of the machine ca.: 1600 kg machine dimensions LxWxH: 1,8 x 1,5 x 2,15 m This machine is currently in the technical department. *

Condition: new, Year of construction: 2026, roller (bottom) diameter: 220 mm, roller (top) diameter: 220 mm, side roll diameter: 180 mm, roller diameter: 220 mm, roller length: 2,070 mm, sheet thickness steel (max.): 10 mm, empty load weight: 4,500 kg, - 4 rolls - Capacity: 2070 x 10 mm - Bending capacity: 2070 x 8 mm - Hardened rolls - Top roll diameter: 220 mm - Bottom roll diameter: 220 mm - Side roll diameter: 180 mm - Hydraulic - Digital display for left roll movement - Digital display for central lower roll movement Gboder H Df Iepfx Acwsk - Digital display for right roll movement - Hydraulic up and down movement system with intermediate and central roll - Hydraulic indicator for easy roll positioning - Hydraulic up and down movement system with intermediate and central roll - Top roll hydraulically swing-out - Steel construction ST-52 - Hydraulic drop-end for easy roll positioning - Hydraulic up and down movement system with central and side rolls - Hydraulic balancing system - Overvoltage protection - Documentation - 400V

Year of construction: 2022, condition: new, Multisaw machine for precision cut of small elements that is used for honey bee frame productions -Power 11kw -Spindle diameter fi 70mm -Saw number 10 -Saw diameter 210mm -Minimum length of work peace 100mm -Max height 40mm Gsdsh Hxycjpfx Acwsbk -Feeding speed 4-8m/min -Quick-change saw holder

Condition: used, Year of construction: 2004, pressure 80 t chamfer lenght 2550 mm distance between columns 2050 mm Stroke beam 350 mm max. opening beam/table 620 mm C-recess 420 mm traveldistance X1+X2 cnc programmable 700 mm Z1+Z2 axes controlled by cnc 0-2000 mm max. distance R-axes 200 mm Quick speed,inspeed 100 mm/sec Gsdoxyzzaspfx Acwobk bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 24000 h length 3380 mm width 1800 mm height 2750 mm weight 6100 kg total power requirement 9 kW dimensions of the machine ca. 3x2x2,5 m All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: new, back gauge: 750 mm, - Capacity 1050 x 6 mm - NC electric back gauge - Foot switch - Rear photocell protection - Support arms - Cutting line illumination - Brake motor - Emergency stop - Documentation Godjgg N Hbspfx Acwobk - Weight 1800 kg - 400V

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Table size: 1120 x 280 mm T-slots in table: 3 x 16 mm Table longitudinal travel: 600 mm Table transverse travel: 250 mm Vertical travel: 360 mm Spindle rotation: +/-45° Distance between table surface and spindle face: 230–630 mm Maximum spindle speed (vertical): 108–2400 rpm Maximum spindle speed (horizontal): 90–2000 rpm Spindle taper: ISO 40 Spindle stroke: 120 mm Power: 2.2/2.2 kW (vertical/horizontal spindle) Dimensions: 1700 x 1450 x 2245 mm (W x D x H) Weight: approx. 1350 kg Accessories, features: - 3-axis SINO digital read our system - spindle feedrate in three steps Gbedpfeybb T Hsx Acwok - 200 mm machine vice - 45° tiltable spindle head - Rotating console - Rotating machine table - 2 x reducers (ISO40/MK3, ISO40/MK2) - Drill head with collet, diameter 3 – 16 mm - 2 horizontal milling spindles - 1 x 15-piece chuck set, diameter 2 – 20 mm - Clamping set - Work light - Cooling water system

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Cheese vat / Pasteurizer / Process tank 100 liters. Used - 3.5 years old The Vat: - Completely stainless steel - Double jacket (bain-marie) + insulation - Must be operated without pressure - 100 liters Gbjdpfx Aewg Ellocwok - Butterfly valve, NW 50 - Agitator mounted on the lid and easily removed using a quick-change adapter. - Agitator rotates slowly; approximately 24 RPM - 400 volt / 8.4 kW heating (16 amp plug). Heating power can be halved with a switch (8.4 - 4.2 kW). Control: - Digital milk temperature display - PID controller / thermostat - Control system with one automatic program (heating - holding - cooling) and manual operation (manual heating and manual cooling with cold water) - Heats up to 90°C - Cooling with cold water. Water inlet with motor-controlled ball valve.

Condition: used, Year of construction: 2008, Technical details: Gbodpfx Asviqybjcwok bore capacity in steel (diameter): 40 mm throat: 350 mm bore stroke: 120 mm bore capacity in cast iron: 60 mm spindle taper MT: MK 4 spindle throat: 350 mm spindle speed:: 50 - 1450 / 18 step U/min feed: automatisch/manuell mm/U Distance spindle/table max.: 25 - 705 mm table clamping surface:: 430 x 430 mm drill table adjustment: 680 mm column diameter: 150 mm distance spindle center to floor plate:: 1210 mm total power requirement: 1,6 kW weight of the machine ca.: 350 kg dimension machine xH: 0,95 x 0,55 x 2,3 m Height-adjustable table(swivel and tilt adjustable ) Table can be swiveled 45° left/right and rotated 360° around the column Thread cutting up to M24 Coolant system A vise is mounted, and a threading device is included with this machine. *

Condition: new, Year of construction: 2026, The ZX7045 B1 DRO milling/drilling machine is an advanced tool created for precision metalworking. It is ideal for drilling, reaming, expanding holes up to 45/40 mm in cast iron, as well as threading screws up to M12 mm. With the ability to mill up to 80 mm wide, notch up to 22 mm, this machine offers versatile applications. The ZX7045 B1 DRO version is distinguished by its auto-feed of the spindle, which increases work efficiency. In addition, it is equipped with a digital readout, which increases the precision of operations, and a cooling system, taking care to maintain the optimum temperature during machining. This tool is ready to use right away, available from stock. Ideal for professionals who demand high quality and performance in metalworking. Product features HEAVY, STABLE CAST IRON AUTOMATIC SPINDLE FEED HEIGHT OF THE MILLING MACHINE IS ADJUSTABLE ON THE SLIDE AND NOT ON THE COLUMN ADDITIONAL LIQUID COOLING SOLID CROSS TABLE WITH PRECISION GROUND SURFACE DOVETAIL GUIDES, QUIET OPERATION THANKS TO GROUND GEARS LEFT AND RIGHT ROTATION HEAD ROTATABLE +/- 900 ADJUSTABLE HEAD HEIGHT DIGITAL READOUT Base available as an optional extra TECHNICAL DATA Drilling capacity in steel 32 mm Drilling capacity in cast iron 45 mm FACE MACHINE DIAMOND 80 mm HANDS CAPACITY 28 mm SPEED RPM 50, 95, 100, 180, 190, 355, 360, 655, 710, 1260, 1310, 2520 rpm. (6/12) MANDREL HANDLE MT 4 Spindle feed 125 mm (AUTOMATIC FEEDING) DIMENSIONS OF THE WORKING TABLE 820 mm x 240 mm DIMENSIONS OF BASE 580 x 600 mm MAX. Spindle distance from the table 445 mm Spindle distance from column surface 260 mm AXIS MOVEMENT X/Y/Z 515/175/430 mm PINOLLE SPEED 0.12; 0.18; 0.25 mm/rev. 90° CLOCKWISE/LEFT HAND ROTATION MOTOR POWER 1,8 kW 2,5 hp POWER SUPPLY 400 V weight 350 kg Available accessories drill chuck shank MK4/B18 digital readout handy tools drill chuck 3-16 mm/B18 reduction sleeve MK4/MK3 Gjdpfxoud H H Us Acwsbk reduction sleeve MK3/MK2 English language user manual