Radial arm saw

ELU RAS 1253

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 200300381, total length: 5,220 mm, workpiece weight (max.): 3,000 kg, Glass Washing Machine Bavelloni LV1604-20 Operating direction: right to left Illuminated discharge area for quality control. 3 washing zones, each with its own water tank: - First tank for brush pair No. 1 is electrically heated and filled with detergent/water mixture. - Second tank for brush pair No. 2 contains cold water for rinsing. - Third tank is for washing zone 3, equipped with spray nozzles for rinsing with pure water. A drying zone follows, utilizing air nozzles powered by a fan. The machine is designed for glass heights up to 1600mm but is open at the top, allowing the transport of taller glass panes. Glass thickness: up to max. 20mm Infeed section length: 1400mm; main machine length: 1820mm; outfeed section length: 2000mm. Automatic stop of the feed rollers when the glass reaches the end of the outfeed section. Operating manual, spare parts list, and wiring diagram are available. The machine has been regularly maintained and is operational; it will be dismantled in calendar week 31/32 of 2025. For further details and dimensions, please refer to the photos or feel free to inquire. Dsdevkxzpspfx Afnekg Demonstration and inspection can be arranged by appointment. Dismantling, loading, and transportation should preferably be organized by the buyer, but can be handled by us upon agreement. A forklift and various assisting tools can be provided. All information and dimensions have been provided to the best of our knowledge and belief, but no guarantee is given for completeness or accuracy! Subject to prior sale. Sold without any warranty or guarantee, as viewed.

Condition: used, functionality: fully functional, Year of construction: 2014, 1600 mm open top vertical glass wasching+ drying machine glass thiknss : 3 - 19 mm inlet conveyor : 2 m outlet conveyor : 2 m Dsdpfowwivpex Afnekg total lenght : 6 m total power : 9 Kw Machine fully fonctional in very good condtion

Year of construction: 1996, condition: ready for operation (used), A Forel multi-pane insulating glass production plant with fixed spacer and Swiggel is available. Glass production options: 2-pane/3-pane, layering: coated/uncoated, insulating glass pane dimensions X/Y min./max.: 400mm x 200mm/2500mm x 2000mm, pane thickness range: 12mm-50mm, total system length: 30200mm. System components: 1) Inlet to the washing machine, 2) Washing machine, 3) Outlet from the washing machine, 4) Place spacer on inlet, 5) Place spacer on outlet, 6) Place spacer on outlet, 7) Inlet assembly station, 8) Assembly station, 9) Outlet assembly station, 10) Inlet roller press (no gas filling press), 11) Outlet roller press, 12) Roller tilting table for removal. Documentation available. On-site inspection is possible. Dkodpfougv R Ijx Afnjg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 302827, Federhenn rod-profile machining center (drilling and milling) SBZ 100G - TO BE SOLD IN LINE WITH 1 SCHIRMER NC-SAW 1000-G4 YEAR 2014 (COMPLETE LINE) SEE SCHIRMER ADVERTISMENT....!! Dedpfx Aewnpa Nefnjkg NC feeder device with gripper max 200 m/min - max profiles 3500 mm.. The gripper can be adjusted pneumatically in 2 axes for adaptation to different profile geometries. Machining station designed as a G-module with 2 servo axes in Y and Z direction. Prepared for accommodating up to 14 processing units for complete processing of PVC, frame, post and frame profiles - outfeeder with table 2500x1500 mm.. PC-control C 6140, display, software SBZ 100G, PLC+NC. Modem remote diagnosis. Loading magazine with 9 places (9 profiles 3500 mm) designed for frame profiles max 127 mm width. Barcode scanner - Horizontal belt conveyor with 9 transport beams that can be adjusted continuously. 18 m/min - 3000 x 2400 mm - units: screw unit, 2 x drilling unit for dowel or post holes, 2 x drilling unit for fixing holes 16,750 rpm, 2 x additional processing (marking the closing part), drilling unit for front door fittings (opens inwards), drilling unit for olive hole drilling (3 sp), milling unit lock case. 2 pcs milling unit for milling and drilling drain slots and ventilation holes. 1 ditto obliquely arranged. 1 swivel device (MD and AD window systems. Milling unit for milling PZ and handle hole pattern

Condition: used, Year of construction: 1980, machine/vehicle number: A-07/471A, sheet width - max.:130 mm straightening roll diameter:40 mm Dedpocxxx Rjfx Afnjkg :5 :2+2 sheet thickness - min.:0,4 mm sheet thickness - max.:3,5 mm weight:0,4 t dimensions of the machine ca.:0,6x0,65x1,15 m with integrated, stepless adjustable Vari-drive, reversing, operating-mode switch for manual and automatic operation, introduction roller cage, position indicator of straightening rolls via analogue display, adjustment of straightening rollers via hand wheels, automatic swivel arm control, very good condition

Condition: used, roll diameter / mm throat / mm workpiece height / mm Dkodjuddmrspfx Afnjg Table dimensions: 615x615mm

Condition: new, Year of construction: 2023, cutting diameter 1100 mm saw band length 11000 x 67 mm cutting width 1,6 mm capacity 90 degrees: square 1100 x 1100 mm capacity 90 degrees: flat 1100 x 1300 mm total power requirement 7,5 kW / 3100 Nm weight of the machine ca. 8700 kg dimensions of the machine ca. 2800 x 1700 x 5200 mm The KSY 550 x 700 is a semi-automatic and column-guided horizontal bandsaw. The chips are transported away via a spiral conveyor. A chip trolley approx. 60 x 50 x 40 is included in the scope of delivery. Dkjdpetq Dw Eofx Afnsg The roller tables can be moved forwards and backwards via the control panel. There is a 1.40 x 1.00 metre roller table on the outfeed side. There is a motorised roller table 2 x 1.40 m on the infeed side. Optional Specifications - Motorized System For Roller Table - Laser Line - Extra Double Roller Table - PLC-Screen - Anti-Vibration System The pictures are for orientation only and do not represent a true-to-scale image of the machine.

Condition: used, Year of construction: 2001, functionality: fully functional, Year: 2001 Dksdotr Dukjpfx Afneg - technically efficient, ready to work (directly from the client) - corner cleaning machine SV 494 CNC - for-head welding machine AKS 6110 - turning station - cooling station - flash limitation: 0.2 - 2 mm

Condition: good (used), Year of construction: 2011, functionality: fully functional, Federhenn's fully automated rod machining center performs all the machining required for windows and front doors in a process-optimized manner. Capacity: approximately 100 rods per 8 hours. Dodowgd Acepfx Afnokg

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, Machine with 3 work stations and 3 transport clamps Electromagnetic linear motor Complete SCHIRMER BAZ 100-G4/SVU centre with stations connected by a "REAL BUFFER" system for time compensation and reinforcement zone. More flexible "Flat-Line" version to accept all types of profiles. For cut profiles up to 3.750 mm (PVC can be cut and machined from 3.750 to 4.450 mm with manual extraction) Control under WINDOWS TWINCAT with BECKHOFF C6140 PC with touch screen. The first station has an automatic loading table for 9 profile bars, a transport clamp with an electromagnetic linear motor, and two work modules, one for machining PVC bars, with 4 CNC axes, rotating with 6 high-frequency motors to work at any angle, and another for cutting with a 500 mm saw blade with variable angles between -45º and + 45º. Label printer and a second extraction clamp with an electromagnetic linear motor to reduce transport times. REAL INTERMEDIATE BUFFER with 27 slots with independent movement to make station times independent, with 8 positions for manual insertion of reinforcement, with indicator lights. Second SBZ-I station with electromagnetic linear motor transport clamp, two work modules, one for screwing, with two screwdrivers (one for frames and one for leaves) with automatic feeder for one type of screw, and the second module has 2 CNC axes and the following drilling motors for PVC + reinforcement: - 1 horizontal drilling unit with a diameter of 6.5 mm (posts and fixing to the work) - 1 horizontal drilling unit with a diameter of 3 mm (locks and square marks) - 1 horizontal drilling unit with a diameter of 3 mm (locks and square marks) - 1 vertical drilling unit from below with a diameter of 3 mm (for hinges) - 1 vertical drilling unit from above with a diameter of 3 mm (for hinges) - 1 vertical drilling unit from below, triple head for 10/12/10mm handles Output table with motorized belts. Dodpfouhm N Djx Afnskg Complete fence with electric closing doors. Possible to see the machine in use until October 11 Exworks price, operational, without warranty Installation, programming and warranty with optional extra cost (only in Spain)