Joinery

AUERTECH Blockhausfräse BL100A, Bj.2006

Condition: good (used), functionality: fully functional, SMELT professional Coating line LED/ All machines are used and still working well. Pgjdpfx Adepyg Itjnjw

Condition: used, Year of construction: 2010, Chalet construction machineused, good condition, little usedmake Krüsitype CMI 40year of manufacture 2010CE type-approvedbsi 140 mm round timber corner jointssaw 1xdrilling 1xrouting 3xworkpiece height 200 mmworkpiece width 250 mmweight approx. 2200 kgTotal connected load approx. kWStorage location 97447 Gerolzhofen, free loaded, unpackedHandover in actual condition as inspected,without guarantee and warranty Pjdpfx Ajvwfqqsdnegw

Condition: good (used), Obel Pedersen RF feed band press Opel Pedersen press type 2412 Pgededybr Rjpfx Adnsw Press length 2500 mm width 600 mm with gluing, carriage, HF generator T20 V and water cooling System has been released.

Condition: like new (used), Year of construction: 2004, HYDRAULIC PRESS FOR GLUING WOODEN ELEMENTS TO THE THICKNESS OF HSKG Category: VI - Hydraulic presses for gluing wooden parts. The HSKG device is used for gluing wooden cut-thickness parts under high pressure of hydraulic cylinders. The range of achievable crushing forces per cylinder is 5-11kN (horizontal) and 25-55kN (vertical). The gluing of elements is carried out in a stack with the dimensions of the loading field. Stack forming is carried out by hydraulic compression between the sliding vertical beams and the vertical slats of the transverse cylinders. Both stack forming elements are equipped with wooden or metal inserts corresponding to the profile of the slat stack. Gluing wooden elements from the thickness improves the quality of the frames, reduces the cost of machining, reduces the amount of wood waste. Technical and operational data ( of standard execution HSKG - 6m ) Number of loading fields pcs 4 Dimensions of a single loading field - loading height Podpetrl R Aofx Adnogw - length of slats in one field mm mm 1140 1530 Maximum width of slats mm 150 Maximum length of glued elements mm 3120 Installed power kW 3 Electricity supply V AC 3/N/PE, 400V 50Hz Control voltage V DC 24 Number of actuators on one field: mm mm O 50x100 - 3 pcs. O 80x100 - 3 pcs. External dimensions (L x W x H) mm 8120x1000x2300 Weight of the device kg 4800 At the request of the customer, we also make other configurations of pressure actuators control depending on the expected length of glued elements, as well as other lengths of individual working fields in different quantities in the whole press set, and working width of up to 220 mm maximum with increased pressure force.

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, Drying chamber Make: Mühlböck Type: ZLSM Year of construction: 2003 Internal dimensions approx. 7400 x 4500 x 4250 mm (LxWxH) 3 fans each 3 kW 10 measuring points With frequency converter Pgedjwr Tzfspfx Adnow With control system Heating power 223 kW Water temperature 85 °C Water quantity 14 m³/h Voltage 230/400 Volt Connected load 12 kW Fans 3 x 3 kW Control program MB Intellevent 5000

Condition: good (used), functionality: fully functional, mileage: 19,856 km, power: 92 kW (125.09 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 2 axles, wheelbase: 3,498 mm, overall weight: 3,200 kg, empty load weight: 2,850 kg, maximum load weight: 350 kg, operation weight: 2,925 kg, first registration: 01/2018, next inspection (TÜV): 01/2026, loading space length: 3,100 mm, loading space width: 2,050 mm, loading space height: 2,750 mm, loading space volume: 17 m³, fuel tank capacity: 80 l, fuel consumption (urban): 7.5 l/100km, fuel consumption (extra-urban): 6.7 l/100km, fuel consumption (combined): 7 l/100km, CO₂ emissions: 181 g/km, emission class: euro6, color: green, driver cabin: day cab, suspension: air, tire size: 205/65 R16C, number of seats: 3, number of previous owners: 1, Year of construction: 2017, machine/vehicle number: W0LE7D60XHV657711, Description A well-equipped and well-maintained food truck, perfect for mobile catering. It features a complete kitchen setup, including refrigerators. The equipment is tailored for catering and events, with sufficient storage space for food and utensils. Equipment: Kitchen equipment: - Refrigerator - Sink - Microwave Storage: - Shelves - Compartments - Storage space for food and utensils Additional features: - Power connection - Water connection - Waste water system Additional details: Vehicle: - Well maintained and registered Condition: - Clean and well cared for - All appliances fully functional - Invoice documents and inspection reports available Description General Information: - Number of doors: 3 (left/right/rear) Podewgcmyjpfx Adnogw - Year of construction: 2017 - First registration: 2018 - Seats: 3 Technical Information: - Power: 92 kW - Cylinders: 4 - Engine displacement: 1,598 ccm - Transmission: Manual gearbox - Maximum speed: 155 km/h Dimensions - Dimensions (L x W x H): 566 x 205 x 275 cm Weights - Unladen weight: 2,850 kg - Max. towing capacity: 3,200 kg Interior Kitchen and sales equipment: - Microwave - Refrigerator Environment and consumption - Average fuel consumption: 7 l/100km - CO₂ emissions: 181 g/km Maintenance, history, and condition - Service booklets: Available (dealer serviced) VAT: For sales at our social market, 10% applies.

Year of construction: 2023, condition: used, Used machine Year of manufacture: 2023, delivered in 2024 Condition: as new, machine is in original packaging and has not been commissioned Equipment and technical data: Infeed Table / Cross Conveyor: - Number of strands: 6 × Supergrip timing belts - Pitch: 650 / 650 / 850 / 1500 / 1500 mm - Length: approx. 1.8 m - Drive: geared motor, 1.5 kW - Minimum workpiece infeed length: 0.8 m - Function: Automatic transfer of raw material by lowering level to the infeed table Infeed Table: - Smooth sliding table with sliding plastic for damage-free feeding of raw material by servo pusher into the machining zone - Support width: approx. 200 mm BLOCKHAUS 4F-SERVO (main milling unit): - Machining dimensions: 140 × 200 mm - Maximum horizontal milling depth top: 60 mm - Maximum horizontal milling depth bottom: 35 mm - Maximum vertical milling depth: 95 mm - Milling spindles: Ø 30 mm - Horizontal milling tools: 2 × D = 220 mm × W = 120 mm - Vertical milling tools: 2 × D = 280 mm × W = 120 mm - Motor power: 4 × 4.0 kW - Feed: horizontal and vertical via SERVODRIVE, infinitely variable via software - Milling depth adjustment: spindle with digital counter - Workpiece clamping devices: vertical pneumatic, horizontal pneumatic - Extraction: below-floor hopper Ø 160 mm (pit by customer required) - Control: IPC / PLC / IITO software - Machine frame prepped for end tenon or dovetail milling, drilling unit and crosscut saw - Machine enclosure: fully closed, with swiveling safety hood (gas strut, viewing window) - Electrical control cabinet on base, cable carrier 3.0 m Option i (automatic milling depth adjustment for 4F milling unit): - Four additional NC-controlled servo axes for automatic positioning of the 4F tools - Control via IPC / IITO software - Function: automatic milling depth adjustment with ±0.1 mm tolerance - Extended machining capabilities: - individual grooves and millings on four component sides, - recesses and markings for window and door openings, - double and triple joints, - half corner joints (e.g. for top and bottom log beams) Tools: - 2 × 3-piece groove cutter D 220 mm, width 21–65 mm, LM - 2 × 3-piece groove cutter D 280 mm, width 21–65 mm, LM - 1 × end tenon cutter D 240 mm × 20 mm - 1 × dovetail cutter D 40 mm, width 15 mm Combination End Tenon & Dovetail Milling Unit: - 3-axis milling unit for production of end tenons and dovetail joints - End tenon cutter Ø 240 mm × width 30 mm - Max. milling depth for end tenon: 40 mm - Dovetail width variable - Motor power: 4.0 kW - Speed: inverter-controlled, max. 4,500 rpm - Feed (DT.Y axis): SERVODRIVE, infinitely variable - Height adjustment (DT.Z axis): SERVODRIVE - Rotation adjustment (DT.R axis): SERVODRIVE - Workpiece clamping device: vertical pneumatic - Minimum beam thickness for longitudinal connection: 80 mm Pgjdpsxavtkofx Adnew - Control: automatic via IPC / PLC / IITO software Horizontal Drilling Unit with Drill Guide (BGD SERVO): - Max. drilling diameter: Ø 30 mm - Drill Ø = 20 mm included in delivery - Motor power: 1.1 kW - Speed: 1,500 rpm - Feed: SERVODRIVE, infinitely variable - Height adjustment (Z axis): SERVODRIVE, digital counter - Workpiece clamping device: vertical pneumatic

Year of construction: 2004, condition: refurbished (used), 2004 Double squaring machine, Friulmac brand, Idramat model Podpfspfp Ezex Adnsgw Note: see [VIDEO](?share=copy#t=0)

Condition: as good as new (ex-display), lifting height: 5,700 mm, Year of construction: 2025, Weights Empty weight: 800 kg Functional Mast length: 440 cm Length of jib: 1 m Lifting capacity: 800 kg CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Tyre brand: Rupsen Maximum lifting capacity at end of jib: 130 kg Hook height horizontal jib: 460 cm Hook height luffed jib: 560 cm Delivery terms: EXW Transport dimensions (LxWxH): 0,0017x0,0007x0,00136 Rental currency: EUR Production country: NL Min boom length: 100 cm Podpfx Adjxtaybonogw Additional information Please contact Sales Department for more information

Condition: new, Year of construction: 2025, warranty duration: 12 months, cutting height (max.): 120 mm, cutting width (max.): 200 mm, power: 16 kW (21.75 HP), Equipment: rotational speed infinitely variable, Machine for processing components for modern log house construction with the perfect price-performance ratio for beginners, small productions, or as a supplement for special parts. Loading and positioning of the components is done manually – after starting the processing unit with the 2-hand buttons, the milling process runs automatically. Optional rolling tables and positioning stops are available for positioning the components. Pgsdownt Htjpfx Adnew