Cutting and machining center

Thorwesten PBZ3

Condition: excellent (used), Year of construction: 2021, Thorwesten MPZ for standard profiles, as well as lift-and-slide door frames and sills, consisting of: Cutting center Thorwesten ASZ 4.2M in a special design. Processing length of 6,500 mm for standard profiles, as well as lift-and-slide door frames and sills, Veka 82 system. Equipped with an extended infeed and outfeed. Lifting rollers and running rollers under the drive belt for trouble-free transport of lift-and-slide door frames. Infinitely adjustable cutting angles from 22.5° to 157.5°. Automatic optimization and processing of leftover pieces. Saw blade diameter 500 mm. Including dust extraction system and waste conveyor belt. Set up for Veka profile system, including widening and special profiles. Full HD panel with Windows 10 operating system. Dodpfx Akjzhi Nhjvjkr Thorwesten VT joining machine in a special design. Processing length of 6,500 mm for standard profiles, as well as lift-and-slide door frames and sills, Veka 82 system. Equipped with an extended infeed and outfeed. Lifting rollers and running rollers under the drive belt for trouble-free transport of lift-and-slide door frames. Automatic profile transfer from the ASZ cutting center. Steel insert compartments. Chain compartments for automatic transfer to the PBZ machining center. Thorwesten PBZ 4.2M profile machining center in a special design. Processing length of 6,500 mm for standard profiles, as well as lift-and-slide door frames and sills, Veka 82 system. Equipped with an extended infeed and outfeed. Lifting rollers and running rollers under the drive belt for trouble-free transport of reinforced lift-and-slide door frames. Dynamic reinforcement screwing unit, as well as a second screwing unit from below on a separate servo axis. Set up for Veka profile system, including widening and special profiles, as well as Roto hardware system. Full HD panel with Windows 10 operating system.

Condition: new, Year of construction: 2026, A550 Fully Automatic Solid Wood Saw 9 m Fully automatic cutting of medium-large wood with simple-to-use automation. Put down any wood and the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Your fully automatic saw can optionally come as an inline optimiser saw. For every piece of wood you place down to cut, no matter what length, a laser sensor will measure its length. Our powerful optimisation algorhithm then takes your cut list and calculates the best order of parts to cut from this wood so that wastage is minimised. All of this happens on-the-fly, during the machine operation process, and without needing any input from you. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and wood feeding rates for maximum process productivity. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Frame and truss manufacture • Sheds manufacture • Furniture manufacture • Mitre timber structures manufacture • Bulk wood cutting Model: A550 Length: 9 m Material Length: 8580 mm Pushing capacity: 20 - 40 kg Dkjdpfx Ajf Ekngskver Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: used, Year of construction: 1995, cutting width 375 mm Cutting height 150 mm dimensions of saw-blade 500 x 30 mm Motor output 2 x 3 kW Cutting length 5100 mm speeds 2800 U/min air pressure 6 bar weight of the machine ca. 700 kg dimensions of the machine ca. 6100 x 1450 x 1450 mm * Profile support plate made of steel * Stable cast construction of the saw unit * Large cutting range, 2 profiles can be cut at the same time * Easy adjustment of the moving unit with roller guides * Double storage of the swivel device * Safe clamping thanks to the two-pressure system * Double saw feed guide * Hydropneumatic saw feed * External dimension correction scale * Left saw unit fixed * Swivel range 45°-90° * Including suction (without piping) ALKO Mobil-Jet 100 year of manufacture 2002 Djdpfxotv Rgrj Akvjkr

Condition: used, Year of construction: 1994, Technical details: Dksdpfx Akju Nigksver saw blade diameter: 450 mm revolution per minute: 2820 U/min cutting lenght max.: 5000 mm cutting length min.: 240 mm air pressure - required: 6-8 bar hole of sawblade: 32 mm mitter cutting - both sides: 45+90 ° air-pressure connection: 6 - 8 bar total power requirement: ca. 4,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 6,05x1,49x1,79 m Further features of the machine: - Pneumatic vertical and horizontal tension - pneumatic mist spraying device - height adjustable machine feet - material supports movable with saw - piece counter Cutting diameter according to tabular cutting range diagram, as dependent on speed and saw blade. Accessories: - 2 spare saw blades Machine can be demonstrated under power. i.D. *

Year of construction: 1999, condition: ready for operation (used), Two automatic flat glass sandblasting systems MHG are available. 1) MHG Glastmaster 1500 Automatic, year of manufacture: 1999, blasting height: 1500mm, max. glass thickness: 70mm, blasting capacity: 30m²/h, air consumption per nozzle at 4bar: 800l/min. Machine dimensions X/Y/Z: approx. 4000mm/2800mm/1100mm, weight: approx. 2000kg, control: Siemens PLC. 2) Sandblasting system without nameplate, machine dimensions X/Y/Z: approx. 3200mm/2600mm/1100mm, weight: approx. 1500kg. An on-site inspection is possible. Dkedpfx Akow Duvhover

Year of construction: 2016, condition: used, Manufacturer: Emmegi S.p.A. Machine: PVC Corner Cleaning Machine Model: Trimmer E Year of manufacture: 2016 CNC corner cleaning machine for PVC frame corners, with 3 interpolated axes and automatic cycle. It is equipped with a 300 mm diameter blade that allows, through different machining programs, the cleaning of the external corner of various profiles. Weight: 600 kg Air pressure: 6 – 7 bar Motor: E48 63/2 Speed: 2850 1/min Power: 3.5 kW Current: 6 A Dodpfx Aoywu A Iskvekr Power supply: 400/3 V Frequency: 50 Hz

Year of construction: 2012, condition: ready for operation (used), A Schüco profile work table is available for sash hardware installation. Installation capacity: approx. 6-8 sashes/day, hardware: Schüco AvanTec, min. pressure: 0.7MPa, max. air flow rate: 20l/min, machine weight: approx. 1200kg. On-site inspection is possible. Dodpfx Aswwlk Nekvekr

Condition: excellent (used), functionality: fully functional, X axis travel (longitudinal axis): 4300 mm Y axis travel (transversal axis): 270 mm Z axis travel (vertical axis): 300 mm Electrospindle 1 HSD – max 18,000 rpm – power 5.5 kW Tool magazine capacity: 4 Angular head for lateral operations Number of clamps: 4 Automatic clamp positioning Dsdpfjy Drzhex Akvokr Weight: 1950 kg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, LINE FEATURES Dedpfx Aey S E E Nokvokr 4-head welding machine FUSION 4H Frame unloading unit First milling module Q-MATIC 1 Serial connection between welding machine and cleaning machine Rotating table Electronic cleaning machine TRIMMER 4A Extraction table Second milling module Q-MATIC 2 Line supervisor laptop Refilling unit Automatic frame unloading

Year of construction: 1998, condition: used, Technical details: profile width: 50 mm work height max.: 950 mm interface: RS 232 Pinout Window profile processing machine for materials such as plastic, aluminum and wooden windows in a continuous process. The materials are conveyed by a pneumatic transport and clamping system. The system consists of two work stations (machines), an electrical control cabinet, and a control panel and transport units. As well as columns with transport system vibrator, chip transport unit and column with receipt printer. Our photos are first taken from the location and then further pictures are how the plant is stored in our stock ready for transport. Workstation no. 1 (machine 1): -sawing station with saw blade Ø 400 x 4,5mm -drilling unit with clamping cartridge (vertical upwards) -drilling unit with clamping cartridge (hotizontal) -Boring with clamping cartridge (vertical down) -twin drilling unit with clamping cartridge (vertical down) -45° drilling unit with clamping cartridge (upwards) Working station no. 2 (machine 2): -drilling unit with clamping cartridge (vertical upwards) -milling spindle horizontal with 11 side milling cutters -Drilling unit with clamping cartridge (vertical down) -Drilling unit with clamping cartridge (vertical upwards) -Drilling unit with clamping cartridge horizontal Djdpfxsu Ibuwe Akvjkr 2 transport units: motor driven -LxWxH: 5.650 x 2.400 x 1.000mm -track width 1.980mm 2 pieces transport units: motor driven -LxWxH: 2.150 x 2.750 x 1.050mm -track width 2.300mm *