Coil line

DREHER BHE-45-520-H-BSH/BRME-7-60-400-F

Year of construction: 2016, condition: ready for operation (used), The Coiltech Decoiler Straightener Feeder System is a compact press feeding system. Belt width: 600mm, material thickness: up to 6.5mm, straightening rollers: 7x115mm, decoiler tonnage: 6000kg, diameter (inner), min-max: 470-520mm. Connected load: 7.5kW, with documentation. Dodpei El Ucsfx Al Asku

Condition: used, sheet width 250 mm coil outside dia. 1400 mm weight max. in kg 2500 kg plate thickness 2 ... 4 mm straightening feed 2,5 ... 15 m/min coiler: expanding range mm total power requirement 1 + 4 kW weight of the machine ca. 1,8 t dimensions of the machine ca. m Dedpfefn Aqmsx Al Aeku decoiler, MHR 250/4: max. coil diameter: 1400 mm coil diameter inside: 450 - 530 mm unbraked decoiler with pressure roller straightening machine, MR 250/4: Belt infeed height: 1250 mm The system was dismantled, checked and repainted.

Condition: good (used), functionality: fully functional, number of straightening rollers: 7, coil outer diameter: 1,400 mm, coil inner diameter: 508 mm, roller diameter: 80 mm, number of feed rollers: 2, feed roller diameter: 80 mm, straightening roller diameter: 80 mm, coil width: 400 mm, load capacity: 3,000 kg, 1. Decoiler Make: Dimeco Model: 2371 E-FPS Year of manufacture: 2006 Load capacity: max. 3 tons Strip width: max. 600 mm Expansion range: 470 – 530 mm Coil outer diameter: max. 1,400 mm Equipped with: • Hydraulic expansion • Pneumatic hold-down roller from above • 6 strip edge guide arms • Pneumatic disc brake 2. Straightening Machine Make: Dimeco Model: 1676 C-VV Year of manufacture: 2000 Strip width: max. 400 mm Strip thickness: 0.8 – 4.5 mm Number of straightening rollers: 7 Number of entry and exit rollers: 2 each Roller diameter: 80 mm Equipped with: Dkjdpfx Aletgvgpo Asu • Frequency-controlled drive • Hydraulic strip feeding aid with support table, feed tongue, hold-down arm from above • Pneumatically liftable entry roller • Lateral strip guide rollers • Pneumatically swivelling strip transfer table between straightening machine and feeder

Condition: used, Year of construction: 1980, functionality: fully functional, Kohler straightening machine 30-400 - built in 1980 Dedpfx Aev Hrltel Asku Number of straightening rollers 9 Max. belt width 400 mm GSW decoiler AHM 1500 - built in 1999 Mounted together on a base frame Further data and pictures on request

Condition: used, Year of construction: 1990, Decoiler Dsdpfx Aouqdhkel Aoku Coil weight: 2,5 ton Material width: 50 - 500 mm Coil exterior diameter: 1400 mm Expansion range: 420 - 520 mm Leveller / Straightener Material width : 500 mm Number of levelling rolls: 9 pcs. Diameter of the levelling rolls: 50 mm Number of pinch rolls: 2 pcs. Material thickness: 6 mm Cross section: 3000 sq mm Feeding speed: 6 - 24 m / min Standard configuration DREHER - Model WAV-MD-25, YOM 2000Electronic universal roller feedSheet width max. 510 mm Sheet thickness max. 6.5 mm Number of feed rollers 2 Diameter of feed rollers 125 mm Feed speed 137 m / min Feed length 0 - 9999.99 mm Feed accuracy +/- 0.05 Drive power 5.5 kW

Year of construction: 1996, condition: used, pressure 80 t stroke 8-140 mm no. of strokes 105 Hub/min ram - range of adjustment 100 mm table surface area 900x625 mm ram surface 600x280 mm hole in the table Ø 150 mm table height 1000 mm tool hole in ram Ø 40 mm Dkjdpfx Asrc Ipnol Aou 490 mm weight of the machine ca. 7 t dimensions of the machine ca. BxTxH 1800x2200x2600 mm

Condition: used, Year of construction: 1978, pressure 160 t no. of strokes 40 - 120 Hub/min sheet width mm total power requirement 40 kW Pressing capacity 160 ton Table clamping area 1,100 x 1,280 mm Ram clamping area 850 x 890 mm Distance between guides 1,120 mm Distance between columns (below guide ways) 1,350 mm Distance between Table and ram in upper position approx. 400 mm No. of strokes 40 - 120 /min Adjustment of stoke 67 / 115 / 160 mm Ram adjustment, motor driven 125 mm Dkodpfxet Hwz Ne Al Aeu Ejector travel 50 mm Total electrical load, approx. 40 kW - 500 V - 50 Hz Weight, approx. 24,000 kg Accessories / Special Features * WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. * 8-track slide bearing guide. * Automatic oil-circulation lubrication. * Hydraulic overload protection in conjunction with the ORTLINGHAUS Clutch Brake * Safety doors. * Motor-driven ram adjustment 125 mm. * Required space: 4 x 2.2 m. Height max. 4.6 m (only press)

Condition: good (used), Thread diameter: 22 mm Thread length: 30 mm throat: 300 mm Djdpfx Aoi Nnutel Aeku Max. working height: 1100 mm Hole table: 360 x 500 mm Drilling depth max.: approx. 500 mm Distance between drill bits: 130 mm Power requirement: approx. 1.0 kW Nominal current consumption: 6 A Machine weight approx.: 1.4 t Machine dimensions approx.: 1.3 x 0.68 x 2.85 m Control unit: conventional Unique table for double-headed drilling with 4 material clamps. Size: 375x250 mm The lateral movement of the table is 150 mm

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,070 kg, maximum load weight: 33,300 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space height: 990 mm, total length: 13,990 mm, total width: 2,550 mm, suspension: air, tire size: 385/55R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Semi-Trailer Container Chassis Fine-grained steel welded construction, semi-trailer plate with 2 interchangeable kingpins and 2 kingpin positions Container Mounts: Rear extension retracted: 1 x 20-foot or 1 x 30-foot, flush with rear Dodpsi Ri R Ssfx Al Aeku Center telescopic stage 1, rear extension extended to stage 1: 2 x 20-foot or 1 x 40-foot, with or without gooseneck tunnel Center telescopic section, 2nd stage; rear extension extended, 2nd stage: 1 x 45-foot container with gooseneck tunnel and rear overhang Center telescopic section, 2nd stage; front extension extended, 1st stage Rear extension extended, 2nd stage 1 x 45-foot container with long gooseneck tunnel and beveled corners Center telescopic system as a telescoping central tube frame with bolt locking mechanism with rear height adjustment and foldable center supports for containers without tunnels Container guide at the front, plug-in and removable Plug-in adapter for front locking, to secure containers without tunnels from below, with mounting bracket when not in use Front extension mounted on rollers, manually extendable (for 45-foot containers with long tunnels) Rear extension mounted on rollers, with hand crank 24-metric-ton, 2-speed support jack, single-sided operation Extendable underrun protection for 45-foot containers Rear bumper Axles + Suspension SAF disc brake axles with 430 mm disc diameter Laser-measured axles/chassis to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44to gross train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assist; operated by 3 brakes (start-up assist functions up to a 30% axle load exceedance and at speeds up to 25 km/h) Brake System 2-line compressed air brake system; color-coded lines for easy servicing. Spring-loaded parking brake Tele Control Axle relief for easy telescoping 2 non-reversible coupling heads at the front, without connecting line EBS, Electronic Brake System with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; truck must be equipped accordingly; no truck installation required (no calibrated scale) Wheels and Tires 385/55 R22.5, manufacturer’s choice Steel rims, factory silver Electrical System 24 volts, multi-chamber lights, LED taillights and brake lights, yellow LED side lighting (Note: With certain towing vehicles, false diagnostic errors may occur even though the system is functioning properly) 2 white front position lights 2 white/red lane-departure warning lights at the rear 2 x 7-pin reverse-proof sockets at the front, without connecting cables Operating Instructions When transporting 45-foot containers with a short tunnel, with or without a front extension, the permissible system length from the kingpin to the rear edge of the vehicle and the total train length of 16,500 mm will be exceeded! The underrun protection must be extended manually! A special permit pursuant to § 70 StVZo is required! Type Approval pursuant to EC Directive 2007/46

Year of construction: 2007, condition: used, functionality: unexamined, machine/vehicle number: 151 000/69, We are offering this used Weil Engineering longitudinal seam welding machine, model Flexmaster 400 WIG, manufactured in 2007. Dsdpfx Alszxqb Ho Ajku If you have any questions or require further information, please do not hesitate to send us a message or call us.