Used Dreher Coil Line for sale (11,595)

Condition: used, Year of construction: 1987, Uncoiler manufactured by DREHER, type 2380 F-FPS. Press force approximately --- tons. Year of manufacture 1994. Summary provided – a full technical translation will follow if required for this lot. Pjdpfx Ajzynmvengjgu

Condition: new, Year of construction: 2026, functionality: fully functional, coil weight: 5,000 kg, coil outer diameter: 520 mm, coil inner diameter: 470 mm, warranty duration: 12 months, coil width: 1,250 mm, total height: 1,800 mm, total length: 3,000 mm, total width: 1,500 mm, type of input current: three-phase, input voltage: 380 V, overall weight: 3,000 kg, 5-ton hydraulic coil unwinder for a coil width of 1250 mm, equipped with a remote control unit. Pedpfx Ane Afdp Iogogu

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, outer diameter: 1,600 mm, total height: 1,600 mm, total length: 1,400 mm, total width: 800 mm, inner diameter: 470 mm, input voltage: 400 V, overall weight: 850 kg, Equipment: documentation/manual, Year of manufacture: 2009 Load capacity: 1500 kg Psdpsz Riz Ijfx Angegu Coil inner diameter: 470 - 630 mm Coil outer diameter: 1600 mm Speed: 12 revolutions/min Frequency inverter Dimensions: approx. 1.7 x 1.4 x 1.7 m Weight: 850 kg Original documentation included, ready for immediate use.

Condition: used, Year of construction: 2011, Decoiler Coil weight: 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1600 mm Expansion range: 460 - 530 mm Leveller / Straightener Material width : 20 - 400 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pull out rolls: 4 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 3,5 mm Feeding speed: 2 - 10 m / min Roll feeder Material width max.: 310 mm Material thickness: 3,0 mm Material thickness at max. width: 2,8 mm Material thickness at max. cross section: 850 sq mm Number of feeding rolls: 2 pcs. Pgedpjuqfa Iefx Angou Diameter of feeder rolls : 80 mm Feeding speed: 104 m / min Required power: 1,5 kW Standard configuration Coil loading unitStroke 500 mm Load capacity 5000 kg Material width max. 500 mm

Condition: used, Year of construction: 2023, Used for the production of refrigerator door panels. Line Specifications: Manufacturer: MAS AUTOMAZIONI SRL Year of manufacture: 2023 Electrical supply: 400 V (±10%), 50 Hz Compressed air: 4.5-6 bar, dew point +5°C Cycle time: 10 seconds Changeover time: Automatic Line dimensions: 38.1 m (L) × 9.6 m (W) × 4.4 m (H) Sheet dimensions: Length: 400-2200 mm (±1 mm) Width: 650-900 mm (±1 mm) Thickness: 0.35-0.55 mm (±0.04 mm) The metal sheet forming line consists of: Sheet loading with measuring laser sensors. Punching and bending station with 2 sets of bending blades for different shapes. 2 available spaces for additional bending or forming stations. 2nd punching stations. Total number of pieces produced to date: 89,963. 2 scrap conveyors. Pjdpfxezummqe Angogu Siemens S7 control system.

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, DESCRIPTION: Complete production line: hydraulic uncoiler, guided feeding system, roll forming machine, hydraulic post-cutting, and automatic run-out/stacking. Profile-specific tooling for TR135-310-930 high-profile sheet metal. Siemens PLC/HMI control system and Schneider frequency-controlled main drives. Minimum thickness: 0.75 mm, Maximum thickness: 1.5 mm Effective width: 930 ± 5 mm Feeding width: 1500 mm Material: Galvanized coil, Yield strength: 350 MPa Psdozvaibspfx Angsgu Working speed: approximately 20 m/min Stacker length: 12 m Location of the line: Serbia

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, input voltage: 400 V, workpiece height (max.): 2,100 mm, workpiece length (max.): 2,000 mm, Ideal-Line Powder Coating Line | Gema Automatic Booth | 17 Guns | Chemical Pretreatment | 250 m Overhead Conveyor Complete Powder Coating Line 3-stage chemical pretreatment system | Dry-off oven | Automatic powder coating booth with recovery system | Curing oven | Overhead conveyor For sale: a complete used powder coating line in good working condition. The line is technically operational and designed for continuous coating of steel and aluminum components. The line consists of: • Overhead conveyor system • Surface pretreatment section • Dry-off oven after washing • Automatic powder coating booth Pedjz Rnu Topfx Angogu • Powder recovery system with cyclone and filtration unit • Curing oven • Loading and unloading stations • Control cabinet and automation system _____ Technical Specifications • Manufacturer: Ideal-Line, booth and application system by Gema • Year of manufacture: 2012 / 2015 • Maximum part dimensions (L × W × H): 2000 × 750 × 2100 mm • Powder application system: Gema automatic system with 17 powder guns • Pretreatment: 3-stage chemical pretreatment washer • Oven heating source: Direct-fired natural gas • Conveyor length: Approx. 250 m • Power supply: 400 V _____ Technical Condition The line has been regularly maintained and operated in continuous production service until 30 September 2026. _____ Additional Information • Technical documentation available • Sale due to plant closure • Inspection available by appointment • All de-installation and removal costs buyer is responsible Location • Koszalin, Poland Price • Cena: 369 000 EUR excl tax

Condition: used, Year of construction: 2012, functionality: fully functional, For sale is a high-performance DIMECO LINAPUNCH MC-F CNC coil punching system for the automated processing of strip material directly from the coil. This system is particularly suitable for the economical production of perforated sheets, mounting plates, fastening rails, ventilation components, and customer-specific punched parts in medium to large quantities. Direct processing from the coil significantly reduces material consumption, setup times, and per-piece costs. The LINAPUNCH technology combines the flexibility of a CNC punching machine with the productivity of a continuous coil line. The system operates with standardized thick-turret tools and enables highly productive manufacturing processes. Technical data: Manufacturer: DIMECO Type: LINAPUNCH MC-F Machine type: CNC coil punching system / punching line Control: CNC, Siemens Simostar 370 Coil processing: Coil inner diameter: 508/610 mm Coil outer diameter max.: 1700 mm Coil weight max.: 6000 kg Strip width min./max.: 170 to 525 mm Material thickness: 0.4 to 3 mm Product length max.: 6000 mm Feed length programmable Pgedpfx Anszmv Dvegou Servo-controlled NC strip feed Automatic strip guidance Punching technology: Punching force: approx. 20 t Multi-axis punching system (X/Y axis) Programmable punching stroke Auto-index function Multi-index function Tool holder for standard thick-turret tools Number of punches: 26 pieces Number of punching heads: 1 piece Number of revolving tool stations: 2 Consisting of: Coil unwinder Leveling unit NC feed LINAPUNCH MC-F punching head Shear Ink marking unit Drop table stacker 2 lifting tables Control panel with CNC control Safety enclosure Application areas: Electrical industry Switchgear construction Ventilation and air conditioning technology Metalworking Profile and component manufacturing Series production from coil material EXW, assistance can be provided with dismantling and loading.

Condition: used, Year of construction: 1985, Decoiler Decoiler with arm: 1,5 ton Material width: 350 mm Coil exterior diameter: 1.200 mm Pgsdpfx Ajxdl Niongsu Expansion range: 370 - 430 mm Speed: 0 - 20 m / min Leveller / Straightener Material width : 250 mm Number of levelling rolls: 9 pcs. Diameter of the levelling rolls: 30 mm Material thickness: 0,5 - 6 mm Cross section: 1.200 mm Feeding speed: 20 m / min Required power: 18 kW Standard configuration - Pneumatic clamp roller- Manual disc brake

Condition: good (used), Year of construction: 2003, functionality: fully functional, SOPREM Precision Coil Feeding Line (Decoiler + Straightener) — 2003. Complete matched feeding line for thin precision strip, ready to pair with a small high-speed stamping press. Decoiler — Type H1000.1000ZV. Max coil weight: 1000 kg. Coil Ø: 1000 mm outer / 375–520 mm inner. Reel speed: 2–20 rpm, 1.5 kW drive. Straightener — Type BR 19 . 160 . 12 . U . Strip capacity: up to 0.5 mm thick × 160 mm wide. Hydraulically driven precision straightening unit. Both units built 2003 · 400 V / 50 Hz · synchronized line with E-stop interlink to downstream press · Made in Switzerland. Pgjdpjzav H Sjfx Angou Technical Specifications Decoiler / Coil Reel (Haspel) H1000 / 1000ZV / 10M / LK.LF / N1 / G Serial No. (nameplate): 110103 Max coil weight: 1000 kg Coil outer Ø: max 1000 mm Coil inner Ø: 375–520 mm Reel speed: 2–20 rpm Motor: KSMV 90L (4), 1.5 kW, 1400 rpm Gearbox: RMI 110 FL LCB, ratio i = 70 Slip clutch: set to 400 Nm Strip sensing: floor contact plate (loop control) Precision Band Straightener (Richtwerk) BR19.160.12.U Function: straightens coil curvature before the press Max strip thickness: 0.5 mm Max strip width: 160 mm Drive: hydraulically driven precision straightening unit Electrical Supply 400 VAC, 50 Hz, 3-phase + neutral + earth Rating: 25 A pre-fuse

Condition: used, Year of construction: 2003, Item No.: Lg 35626 Coil handling system KOHLER 30.400/9 - 2000.2H used Year of manufacture: 2003 Machine No.: 70330 Working direction: from left to right Loading side: rear Consisting of: Double unwinding reel 2000.2H Load capacity: max. 2,000 kg/side Coil width: 85 to 400 mm (when using a pressure arm) Spreading range: 360 – 420 mm Outer diameter: max. 1,800 mm Spreading: hydraulic/sliding wedge system + Automatic retension Drive: 2 x hydraulic motor + auxiliary drive for coil feeding and rewinding Braking: spring-loaded/disc brake Coil diameter-dependent control Lateral displacement: motorized Displacement distance: approx. 200 mm Base frame: frame construction Swiveling: motorized 180°, locking pneumatic, actuated wedge Counter bearing: manually attachable with quick-release fastener, open construction Coil loading: by means of rope or strap Spreading: The spreading is carried out hydraulically via a sliding wedge system. The reel is additionally equipped with an automatic retension system, so that the clamping pressure is maintained for several days. Counter bearing: The counter bearing is designed as a ring strut construction and can be attached manually. Two effective quick-release levers ensure a secure hold. The lightweight construction made of square tube profile in an open design has a total weight of approximately 15 kg with an outer diameter of 1600 mm. Automatic brake control/coil diameter dependent A diameter-dependent brake control is achieved via a proportional valve. During the acceleration and deceleration phase, the braking effect is automatically adjusted via a correspondingly controlled proportional pressure control valve. This control technology guarantees smooth coil unwinding. Base frame with motorized lateral displacement of the reel 2 x pressure roller, swiveling: The pressure roller is used to feed the coil into the straightening machine. It also prevents the coil from jumping when the coil strapping is released. The swiveling of the roller, which is coated with plastic, is carried out hydraulically. The contact pressure can be adjusted continuously. The drive of the roller is carried out via a hydraulic motor. Coil straightening machine 30.400/9 Passage width: max. 400 mm Number of straightening rollers: 9 pcs. Pedszpbazepfx Angegu Straightening roller diameter: 30 mm Straightening roller material thickness: 0.4 – 3.0 mm Roller stand adjustment: motorized (2-point) The complete straightening roller bearing is mounted on a slide plate at the top and bottom and can be manually moved in and out. Measuring device: digital Measuring display: metric Setting accuracy: 0.01 mm Straightening roller bearing: needle bearing Bearing sealing: shaft seals Straightening roller hardness: HRc 60 Straightening roller surface roughness: 0.001 mm and better Straightening roller drive: individual drive Gearbox: distribution gearbox Lubrication: grease lubrication of the straightening roller bearing Oil circulation lubrication of the cardan shafts Drive: three-phase motor with frequency control Speed: 0 - 40 m/min Number of coil feed rollers: 2 Coil feed roller diameter: 120 mm Coil feed roller adjustment: pneumatic Drive coil feed: both rollers from the straightening machine gearbox Surface coil feed rollers: like straightening rollers

Condition: used, Year of construction: 1988, Ref. No.: Lg 35526 KOHLER Strip Processing Line 18.260/19 - 1000.2H used Year of manufacture: 1988 Direction of operation: left to right Loading side: front Comprising: Double decoiler 1000.2H Load capacity: max. 1,000 kg per side Strip width: max. 260 mm Mandrel expansion range: 460 – 520 mm Outer diameter: max. approx. 1,200 mm Podjyb A Swepfx Angjgu Straightening Machine 18.26019 Passage width: max. 260 mm Number of straightening rollers: 19 pcs Roller diameter: 18 mm Straightenable material thickness: 0.3 – 1.5 mm Drive power: approx. 7 kW Speed: 0 – 40 m/min Roller adjustment: motorized (2-point) Used, as-is, ex stock, immediately available. Overhaul available on request. Delivery time by arrangement. Further data to follow or upon request. All information is based on manufacturer’s data and is non-binding for us – Subject to prior sale and errors excepted.

Condition: good (used), Year of construction: 2000, functionality: unexamined, Equipment: documentation/manual, Eccentric press VSS, type LE 400 C, complete with LASA strip feed system. Press LE 400 C Table size 1250 x 895 mm Ram size 950 x 560 mm Weight 21,000 kg Nominal capacity 400 t (metric tons) Stroke rate 40/min Stroke length 450 mm Pgedpfx Anoz Rk Shegou Dimensions 1550 x 2900 x 3610 mm Unwinding reel – up to 4000 kg - Coil outer diameter – 1600 mm - Coil inner diameter – 450/550 mm - Strip width – 450 mm - Revolutions – max. up to 25/min LASA 400 strip straightening machine - Adjustable height - Speed – up to 70 m/min - Complete documentation - More information and detailed images available upon request - The straightening machine with unwinding reel can also be sold separately. Press – after inspection - Stroke adjustment and clutch-brake

Condition: used, Year of construction: 2006, functionality: fully functional, year of last overhaul: 2022, SCHULER GRÄBENER TMK 2-630 – 630 t Punching and Forming Press with Coil Feeding System Manufacturer: SCHULER / Gräbener Pressensysteme Type: TMK 2-630-3.0-50/210 S Year of Construction: 2006 Press Force: 6,300 kN / 630 t Design: Mechanical Punching and Forming Press / Single-Action Press For sale is a SCHULER GRÄBENER TMK 2-630 mechanical single-action press / punching and forming press with a press force of 6,300 kN, including a complete SCHULER automation strip guiding, straightening, and coil feeding system. The system was used for the mass production of punched and formed parts and is currently still fully assembled on site. Technical Data Press Rated Force: 6,300 kN Rated Stroke: 12 mm Stroke: 50–210 mm Stroke Rate: 15–60 strokes/min Max. Flywheel Speed: 960 1/min Ram Adjustment: 200 mm Max. Installation Height: 800 mm Table / Tooling Area: approx. 3,000 × 1,500 mm Max. Tool Dimensions: 3,000 × 1,500 × 800 mm Max. Tool Weight: 12,000 kg Drive Power: max. 280 kW Rated Current: 420 A Compressed Air: 6 bar Hydraulic System: 400 bar Clutch / Brake: 6 bar Permissible Switching Rate Clutch / Brake: 16/min Machine Weight without Accessories: approx. 138,000 kg Coil and Feeding System SCHULER Automation / Gräbener Pressensysteme, Year of Construction 2006. Coil / Uncoiling Unit: Type AC-LH-160-0650 Strip Width: 40–600 mm Coil Outer Diameter: 900–1,800 mm Pgedpfx Aszv Utnongju Spreading Range: 470–530 mm Coil Uptake / Uncoiling Strip Guiding and Straightening System Threading / Strip Guiding Devices Automated Material Feeding Roller Guides Conveying / Removal Technology Complete Protective Enclosure Control / Operation SCHULER System Control Siemens SIMATIC Operating Components Siemens SIMATIC OP17 Touch Panel Separate Operating Panel for the Feeding System Setup Operator Devices Unidor Process / System Monitoring Condition and Maintenance The system was overhauled in 2022 for approximately €85,000. The maintenance history has been regularly recorded. Current maintenance and repair records are also available for 2026. The system is fully assembled on site and can be inspected by appointment. Scope of Supply The press system is sold, including the associated SCHULER automation and the existing coil, strip guiding, straightening, feeding, and removal technology, as well as the associated protective enclosure and operating / control devices, according to the existing system scope. Complete Service from a Single Source Upon request, we offer a complete project management service for this system – from financing to installation and commissioning at the new location. Possible Services: Individual financing and leasing solutions Organization and support for disassembly Heavy-load loading and transport International transport and export processing Organization of crane and heavy-load operations Reconstruction and assembly at the new location Support during commissioning Coordination of required service and specialist companies This allows the system to be taken over not only at the current location, but also as a completely organized machine project, depending on the customer's requirements. Location: Germany Availability: by arrangement Inspection: by appointment Disassembly / Transport / Reconstruction: can be completely organized upon request Financing / Leasing: upon request Technical data based on available documents and nameplates, subject to change and prior sale.

Condition: reconditioned (used), functionality: fully functional, power: 110 kW (149.56 HP), Equipment: documentation/manual, Complete refurbished Amandus Kahl C35-780 pellet press production line Complete production line featuring a fully refurbished Amandus Kahl C35-780 pellet press. The Amandus Kahl C35-780 pellet press has recently undergone a complete overhaul at the Amandus Kahl factory. All documentation for the newly replaced parts is available. An overview of these parts can also be found among the photos. The production line consists of: - Amandus Kahl C35-780 pellet press - New 110 kW electric motor on the pellet press - Electrical control cabinet with emergency stop, including complete electrical documentation - Conveyor belt - Screening and cooling system that screens the pellets and cools them automatically - Hydraulic nut - Roller head in perfect condition - Including electrical wiring - Feed screw that transports the material to the pellet press - Automatic dosing system that measures the amount of pellets for filling, for example, a big bag Psdpfx Anj Agk Risgegu - 4 extra dies with 6 mm holes - 60 liters of extra synthetic oil Overview of the parts replaced during the overhaul: - 7 new bearings - 2 new wear rings - 1 new air filter - 2 new oil seals - 1 new oil filter - 1 new oil pump - 20 liters of synthetic oil 800/460 - 1 new pressure piece for the main shaft Do you have any questions or would you like to inspect the complete production line? Please feel free to contact me. Sincerely, Danny van Tol Inventtol B.V.

Condition: used, Year of construction: 1994, machine/vehicle number: 940082, Decoiler Coil weight: 2 x 2 ton Material width: 380 - 500 mm Coil exterior diameter: 1.300 - 1.400 mm Expansion range: 445 -530 mm Leveller / Straightener Material width : 40 - 500 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pinch rolls: 2 pcs. Diameter of the drawing rolls: 60 mm Pgsdpfxjuqc Hro Angju Number of pull out rolls: 2 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 1,6 mm Cross section: 800 sq mm Feeding speed: 0 - 30 m / min Required power: 3 kW

Condition: used, Unwinding reel for coil material, DREHER - DIMECO Type 2370 BF Model 653, Year of manufacture 1979 Coil weight max. 2000 kg Coil width max. 320 mm Coil width with guide arms max. 320 mm Coil width without guide arms max. 480 mm Coil inner diameter 340-540 mm Coil outer diameter max. 1400 mm Center of reel crown to floor 900 mm Center of reel crown to reel base 870 mm Reel shaft, support shaft Ø 90 mm - Central spreading adjustment of the reel crown via hand crank (square drive 24 mm) Pgodpjz R D Snsfx Angeu - Mechanical brake on the reel shaft with manual brake force adjustment via hand crank - 6 coil guide arms 500 mm, with toggle clamp - Conversion to motor drive possible, motor mount available, sprocket for roller chain on the reel shaft available Footprint: Width: 170 cm x Depth: 138 cm x Height: 160 cm Space required for transport: Width: 78 cm x Depth: 138 cm x Height: 120 cm Weight 430 kg Good condition

Condition: used, Year of construction: 1993, Uncoiler manufactured by ARKU, type AH 2000/M. Press force approximately --- tons. Year of manufacture 1993. Structured summary – a full technical translation will follow if required for this lot. Pgsdpfszym Ewox Angju

Condition: repair required (used), Sheet Metal Processing Unit, Decoiler, Straightener, Guillotine Shear, Reinhardt Maschinenbau GmbH Ras 228.60 Used Machine Pedpfx Anevkbrqjgegu Manufacturer: Reinhardt Maschinenbau GmbH Model: Ras 28.60 Maximum Sheet Width: 1500 mm Maximum Sheet Thickness: 1.5 mm Total Weight: 9350 kg Features: Decoiler Measuring Unit Sheet Straightener Guillotine Shear Electrical Data: Voltage: 400 V Power: 12 kW Frequency: 50 Hz Current: 35 A Note: The control panel display is not functioning.

Year of construction: 1995, condition: used, A decoiling, straightening and stamping line with roller feed, straightening machine, decoiler and hydraulic press is available, 1) Roller feed WV-U-80/DSM 300 P-N, working direction: left to right, max. strip width: 300mm, strip thickness: 0.1-5mm, max. strip cross-section: 1,000mm², roller diameter: 80mm, max. feed speed: 120m/min, max. roller contact force: 4.5kN, feed accuracy: ±0.05mm, adjustable pneumatic pressure: approx. 5bar, 2) Straightening machine RSTC W60/7/300, working direction: left to right, passage width: 320mm, max. strip width: 300mm, strip thickness: 0.4-5mm, max. strip cross-section: 1,050mm², straightening and correction roller diameter: 60mm, feed roller diameter: 80mm, strip speed: 0-30m/min, feed rollers: 4, straightening rollers: 7, correction roller: 1, drive power: 3kW, 3) Decoiler E 3000/300 OMB, working direction: left to right, max. load capacity: 30kN, expansion range: 470-520mm, max. coil outer diameter: 1,500mm, strip width: 300mm, main shaft height above floor: 1,000mm, weight: 1.2t, 4) Hydraulic Single-Column Press Dunkes, pressing force: 125t, including documentation. On-site inspection is possible. Psdpfx Anjz R A Rpogjgu

Condition: used, Coil Sheet Metal Cutting Line – CARBONINI SLER 1500 RIG – Year 2009 Industrial CARBONINI coil processing and sheet metal cutting line, designed to perform coil unwinding, sheet metal straightening, notching and cutting operations. The line is capable of processing sheet metal with a maximum working width of 1,500 mm and a declared maximum thickness of 2 mm. The system consists of several processing units arranged in sequence for sheet metal preparation and cutting. Line Configuration 1. Coil Decoiler Unit designed to support and unwind sheet metal coils, feeding the material into the processing line. 2. Sheet Metal Straightener Straightening unit designed to correct deformations in the sheet metal as it is unwound from the coil, preparing it for subsequent processing operations. 3. Notching Unit Unit designed to perform notching operations on sheet metal according to specific production requirements. 4. Shearing Unit Cutting unit designed to cut sheet metal to the required dimensions. Pedpjz Nz S Nsfx Angjgu Main Features Maximum working width: 1,500 mm Declared maximum sheet thickness: 2 mm Complete system comprising a coil decoiler, sheet metal straightener, notching unit and shearing unit. Heavy-duty industrial construction with protective guards around the operating units. Electrical control cabinet and operator control station visible in the photographic documentation. Machine Identification Details Manufacturer: CARBONINI Model: SLER 1500 RIG Year of manufacture: 2009 CE marking: Present on the manufacturer's identification plate Weight indicated on the identification plate: 6,200 kg

Condition: used, Arku TRM 50125/21 Sheet Straightening Machine We offer the equipment as follows: Straightening machine optional: Foiling machine 2x deposit tables with vacuum lifter Roller conveyor tables Pgodpjzlyruefx Angsu 1x staircase transition

Condition: excellent (used), Year of construction: 2015, operating hours: 5,100 h, Power: 4,000 kN Bolster area: 3,000 x 1,400 mm (W x D) Clamping surface table: 2.950 x 1.500mm Clamping surface ram: 2,950 x 1,240 mm Daylight: 600 mm (stroke down and adjustment on top) Frequency: 5 - 100 rpm, infinitely variable Stroke: 20 - 200 mm, automatically adjustable Ram adjustment: 150 mm (motorized) Design: - With servo technology, speed of ram adjustable, possible to pendle - Table - clamping plates divided and manually adjustable - 8-fold sliding guide - motorized oil - central lubrication - automatic ram adjustment - pneumatic ram weight compensation - electromotive stroke adjustment - control Siemens + Fanuc - visualization Siemens Panel PC in mobile desk - tool safety device 8-fold - tool data memory - 2-channel press force measurement - Hydraulic overload protection - T-slots in table and ram - Longitudinal groove for tool centering in ram - Anti vibration machine feet - opening in the table Equipped with a complete decoiling line make Lorenz Decoiler Load capacity: 80kN strip width: 20 - 820 mm Inner diameter: 470 - 520 mm Coil - outer diameter 1.800 mm Pgodopvlf Sopfx Angju Straightening machine strip width: max. 820 mm Strip thickness: 0,5 - 4,0 mm Straightenable cross section: 1.600mm² Number of rolls: 9 pcs, Ø 65 mm + 2 pcs feeding rolls Speed: 0 - 30 m/min Electronic roll feed Strip width: max. 820 mm Strip thickness: 0.5 - max. 6.0 mm Cross section: max. 2.400 mm² Number of rollers: 2 pcs. Ø 120 mm

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Storti Nailing Line GSI/150-AL2 – pallet line The Storti GSI/150-AL2 pallet nailing line is designed for efficient pallet production. This robust industrial machine is suitable for automated pallet assembly, offering reliable performance and increased production capacity. Podpfx Aezgayujngsgu Holtec Variocut VC-SHKA-HPI – cut-to-length saw / optimization line This industrial machine is designed for precise and efficient wood cutting. It is suitable for woodworking operations requiring reliable performance, high output, and accurate material cutting.

Condition: good (used), Year of construction: 1984, Power: 800 kN Frequency: 30 - 200 rpm, adjustable by PIV gearing Stroke, adjustable: 20 - 100 mm Daylight: 500mm (max. stroke up) Ram adjustement: 75mm Size of bolster: 1.010 x 800mm Opening in bolster: 700 x 150mm Ram area: 860 x 700mm Motor power: 22 kW equipped by: - 8pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - electro pneumatic stroke adjustment with complete decoiling line make ALBA, consisting of: Decoiler Pgodpfx Aodhzf Isngou Outer diameter max. 1.400mm equipped by: • Decoiler moveable hydraulic • hydraulic coil loading device • hydraulic drive • hydraulic expansion 480 - 530mm • hydraulic pressure arm, lateral adjustable by handwheel • lateral arms Straightener Type: Ma Ria 9 Width: max. 400mm Thickness: 0,5 - 5,0mm Number of pulling rolls: 2 pc., Ø 120mm, upper can be lifted by hydraulic Number of straightening rolls: 9 pc., Ø 60mm, upper rollls adjustable by hydraulic drive, all rolls supported equipped by: • hydraulic strip insertion device • lateral strip guidings at entrance • lateral strip guidings at exit • basket at exit • loop control by sensor • lateral loop guiding Roll feeder Type: Vhy 400 Width: max. 400mm Thickness: max. 5,0mm passline adjustement by hydraulic jack We can offer even only press or decoiling line