Conveyor system

Kohler / GSW 30-400 / AHM 1500

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: TET351P5-offAD-Bypass - 2200373733, cooling capacity: 66 kW (89.73 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,082 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -5 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 11.2 m³/h, pump pressure: 4.68 bar, total width: 866 mm, total length: 2,250 mm, total height: 2,054 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process chiller / air-cooled water chiller, Type: TAEevo Tech 351 P5-offAD-Bypass MTA S.p.A. Chiller, water chiller; cooler TAEevo Tech 351 P5-offAD-Bypass are air-cooled compact water chillers suitable for outdoor installation down to -5°C. Includes crankcase heater, electronic expansion valves, phase monitoring, 350-liter buffer tank, and integrated P5 high-pressure pump. Special features: - Open fill system / attached tank - Bypass with manual valve between water inlet and outlet Chilled water outlet temperatures adjustable from -10°C to +30°C. Cooling capacity: 66 kW Chilled water temperature outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 11.2 Available pump pressure (bar): 4.68 Ambient temperature (°C): 32 Refrigerant: R 410A Electrical data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3 Max. power consumption (kW): 39 Max. current (A): 68 Start-up current circuit (A): 213 Protection class: IP54 Dimensions: Length (mm): 2250, Width (mm): 866, Height (mm): 2054 Weight (kg): 1082 Connection: Rp 2" Serial no.: 2200373733 Year of manufacture: 2021 Condition: Visual 2, Technical OK used (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 88131 Lindau Iaodpjwlt Rajfx Ahvsp Used machines may have visual imperfections due to their usage. (Subject to technical changes and prior sale!)

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, This degreasing system operates under vacuum (pressure swing process) with modified alcohol or hydrocarbon. (New system) 12-month warranty Immediately available from St. Gallen With vacuum pressure swing process System process: spray, immersion, ultrasonic, and steam degreasing including vacuum drying. Specifications: Ultrasonic 2*1000 W - 25 kHz Double fine filter Chamber door in bulletproof glass 2-tank system, capacity 400L Double distillation and residual distillation Automatic oil discharge 3-stage water separation Iaedpfxsqy H H De Ahvop Electropolished chamber for ultra-fine cleaning Screw vacuum pump (latest generation) Loading trolley 2 wash baskets, mesh size 7mm and 12mm 12" touch panel Prepared for automatic loading Maximum basket size (480 x 320 x 200 mm) Maximum load weight 100 kg System dimensions 2400 x 2400 x 3300 mm System weight (basic version) 2500 kg Color RAL 9003 (white) RAL 7021 (black)

Condition: new, Year of construction: 2026, number of rollers: 3, shaft diameter: 80 mm, - Ring bending machine - Shaft diameter 80 mm - The two lower rollers are moved hydraulically - Three rollers are driven - Two digital displays - Brake motor Ijdeucqquepfx Ahveap - Can be used horizontally/vertically - Mobile control panel - Emergency stop - Documentation - 400 V

Condition: used, machine/vehicle number: 4131, Comm. no. Lg 34422 High performance automatic punching machine BRUDERER BSTA 60 H from current production. Stroke adjustment has to be repaired. Iedpfxoinzdlj Ahveap Without soundproof cabin and without conveyor system. Feed BBV 202/120

Condition: good (used), Hook type shotblasting machine 250 kg TOSCA TS-250 Type: Hook type Max. diameter of workpiece: 1000 mm Max. height of workpiece: 1500 mm Iodpfxjvpgq No Ahveap Max. workpiece weight: 500 kg Machine oppening width: mm Nr. Of turbines: 2 Turbine type: 360 Turbine wheel diameter: 360 mm Power of turbine: 7,5 kW Max. turbine flow: 105 kg/min Type of transport rail: Y Cleaner type: airwash Foundation: no Housing protection: Mn+ rubber Req. air flow: 3.000 m3/h Max. installed power: app. 19 kW Total weight of machine: 0 kg Total width of machine: mm Total height of machine: mm Total length of machine: mm Machine is in the process of full refurbishment. All components that are damaged will be replaced with new, turbiness fully reconditioned, new color RAL 7037/2000..... Machine will be dellivered in condition comparable AS NEW. !!! AS NEW CONDITION !!!

Condition: used, Year of construction: 2007, machine/vehicle number: 001669, Lg 33121 Single side decoiler ARKU AH 3000/ST-M year of manufacture 1995 belt width max. 600 mm load capacity max. 3.000 kg coil outer diameter max. 1.800 mm Spreading hydraulic Pressing arm hydraulic Decoiler with auxiliary drive and brake coiler chair fixed + reel traversing device with: Lg 33221 High performance belt leveler LORENZ BRM 50/620.9 year of manufacture 2007 Iedpshigmbjfx Ahvsap Machine no. 001669 passage width max. 620 mm number of straightening rolls 9 Straightening roll diameter 50 mm Material density 0.7 to 6.0 mm Straightening rolls supported several times against deflection All rolls driven by transfer gearboxes and cardan shafts. cardan shafts. Used, in as-is condition from stock, available immediately. On request with overhaul. Delivery time by agreement. Further data shortly or on request.

Condition: reconditioned (used), Year of construction: 1983, Power: 2.000 kN Frequency: 60 rpm Stroke, adjustable: 20 - 120 mm Daylight: 450mm (max. stroke up) Ram adjustement: 100mm Size of bolster: 850 x 810mm Opening in bolster: 00 x 50mm Ram area: 750 x 810mm Motor power: 22 kW Iedpfx Ahogpxc Soveap equipped by: - 1pc. con rod - 6pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - manuel stroke adjustment - pneumatic ram balancing cylinder - anti vibration machine feet

Condition: new, capacity 90 degrees: round 510 mm Ijdpfxjd Iipme Ahvsap capacity 90 degrees: square 450 mm 650x450 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 5320 x 34 x 1,1 mm total power requirement 3,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,9 x 2,87 x 1,3 m PROMOTIONAL PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure regulator • Solid material inlet roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to diagonal cutting • Control panel ergonomic, safe and free-standing • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large-sized wheels (520 mm) a. • Clear miter adjustment up to 60° Semi-automatic function: 1. Tension the material 2. Saw starts 3. Lowering in rapid traverse to the beginning of the material or the same for series cutting cut 4. Saw blade off 5. Raise the frame until it is just above the material 6. Vice opens

Condition: excellent (used), Year of construction: 2013, x-travel 1000 mm y-travel 550 mm z-travel 500 mm CNC-control Fanuc Oi-MD table-size 1.100 x 500 mm Ijdpfx Aoxvdtwjhvsap max. table load 700 kg spindle taper ISO BT-40 spindle turning speed range 10.000 U/min feed stepless 24.000 mm/min rapid traverse 36/36/30 m/min drive capacity - spindle motor 15/11 kW tool change unit 24 coolant IKZ 20 bar voltage 400 V total power requirement 30 kVA weight of the machine ca. 6,5 t dimensions of the machine ca. 3,35 x 2,20 x 2,67 m chip conveyor 2,40 x 1,50 x 1,40 m filter unit 0,90 x 1,40 x 1,30 m Transformer 0,60 x 0,55 x 0,55 m - Serial No..:M281361B5N D - Machine ON: 21,011 h - NC-Indexing Device Manufacturer KITAGAWA, (Call by M-Command) - control: FANUC Oi-MD - Internal coolant supply through spindle 20 bar - Chip conveyor

Condition: ready for operation (used), Year of construction: 1984, Press force: 3600kN, press force stroke: 1.7mm, press work capacity: 6120J. Stroke: 60mm, installation height: 340mm. Table clamping width/depth: 440mm/525mm, tool holder width/depth: 440mm/320mm. Dimensions X/Y/Z: 1300mm/2000mm/2230mm, weight: approx. 6300kg. Ijdpfx Asr A Eifohveap