Decoiler for coil material up to 2000 kg, uncoiler, recoiler and decoiler.

DREHER - DIMECO 2370 BF

Condition: used, sheet width 250 mm coil outside dia. 1400 mm weight max. in kg 2500 kg plate thickness 2 ... 4 mm straightening feed 2,5 ... 15 m/min coiler: expanding range mm total power requirement 1 + 4 kW weight of the machine ca. 1,8 t dimensions of the machine ca. m decoiler, MHR 250/4: max. coil diameter: 1400 mm coil diameter inside: 450 - 530 mm Bsdpfx Ajfn Aqmog Tjdi unbraked decoiler with pressure roller straightening machine, MR 250/4: Belt infeed height: 1250 mm The system was dismantled, checked and repainted.

Condition: used, functionality: fully functional, EUROMAC MULTI 220/6R NOTCHING MACHINE Maximum cutting length 220 mm Maximum sheet thickness 6 mm Variable cutting angle 30 - 120 WITH PUNCHING MACHINE EUROMAC Multi 220/6R 2-station notching and bending machine Press brake, press brake, cutting machine Cutting capacity steel from 6 mm to 45 kg/mm2 Becu Akmemck Ryo Iswn 4 mm for stainless steel Station I (notching) Notching angle from 60° to 140° (with special knives from 30° to 140°) Knife length 220 mm Table dimensions 950 x 640 - manual angle adjustment by handwheels - Notching angle with built-in knife set from 60° to 140° - hydraulic knife locking upper and lower - automatic cutting gap adjustment - Blank holder - Measuring tapes built into the table - Stop guides with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 tons Table dimensions 950 x 340 Working height 1100 mm - Regular lifting speed Bodpfowqdfxox Ag Todi - Continuously adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4 prisms 90°, length = 415 mm - Upper tool 90°, length = 415 mm Motor power 4kW Mains connection 400 volts, 50 Hz OVERALL DIMENSIONS 115X100X125 WEIGHT: 900 KG

Condition: used, Coil line – Uncoiler and Leveler Year of construction: 1991 Coil width: 50 to 450 mm Sheet thickness with inactive leveler: 6 mm Sheet thickness with active leveler: 2 mm - Very good condition and comprehensive operating instructions Space requirement of the entire system L x W: approx. 7000 x 3000 mm Weight of the entire system: approx. 11 tons Good condition Leveler HMS Type RS 47-04/1, Machine No. Coil width, nominal width: 400 mm Coil width, maximum passage width: max. 455 mm Coil thickness at 400 mm width: max. 1.5 mm (for steel) Coil thickness at 400 mm width: max. 2 mm (for copper) Bjdpfeif Sg Sex Ag Todi Speed: max. 40 m/min Number of leveling rolls: 7 pieces Leveling roll diameter: Ø 40 mm Number of tension rolls: 2 pieces Tension roll diameter: Ø 80 mm Infeed height, passage height: 1500 mm - Leveling rolls hardened, ground, and hard chrome-plated, with central support - Tension rolls hardened, ground, and hard chrome-plated, with hydraulic gap adjustment - Manual adjustment of the leveling rolls - Infeed guide with hydraulically extendable tongue and hydraulically adjustable idler roller - Adjustable lateral coil guide - All leveling rolls driven via distributor gearboxes with universal joints - Both tension rolls driven via gearboxes with universal joints - Frequency-controlled drive via geared motors - Leveler opening stroke 250 mm for cleaning the system or for processing thicker material, stroke movement via trapezoidal spindle - Ultrasonic loop control Transport dimensions L x W x H: 3600 x 2200 x 2200 mm Weight: approx. 4 tons Uncoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outer diameter: max. 1600 mm (with loading table) Coil outer diameter: max. 2000 mm (without loading table) Diameter of the coil inlet disc: Ø 1700 mm Coil inner diameter, spreading range: 460-520 mm Coil width, nominal width: max. 630 mm Width of the spreading jaws: 750 mm Height of the uncoiler arbor above the base plate: 1500 mm - Drive of the uncoiler arbor via hydraulic motor and gear - Pneumatic retarder brake on the uncoiler arbor TWINFLEX - Hydraulic spreading of the uncoiler arbor, centrally via wedge slide system - Hydraulic pressure arm with hydraulically driven double rocker roller - Coil loading table with 12 tons lifting capacity and 300 mm stroke - Uncoiler in an above-floor running frame with motorized transverse travel drive Transport dimensions L x W x H: 3500 x 1900 x 2500 mm Weight: approx. 5 tons Central hydraulic unit, separate Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 pumps REXROTH (tandem pump) - Oil cooler as an air heat exchanger with fan motor Transport dimensions L x W x H: 1600 x 850 x 1450 mm Weight: approx. 800 kg Electrical cabinet, separate - All cable connections are made via Harting connectors Transport dimensions L x W x H: 2800 x 500 x 2250 mm Weight: approx. 800 kg

Condition: used, Year of construction: 1987, functionality: fully functional, table length: 950 mm, table width: 910 mm, pressing force: 80 t, overall weight: 16,500 kg, punching force: 80 t, Max. pressing force: 80 tons / 800 kN Strokes per minute: 100 - 1000 SPM Mains voltage: 400 V Mains frequency: 50 Hz, 60 Hz Power consumption: 43 kW Control voltage AC: 24 V Compressed air connection: 6–10 bar Stroke length adjustment: 16, 19, 26, 35, 43, 51, 58, 63 mm Ram adjustment: 76 mm Average upper tool weight: 600 kg Maximum tool width: 970 mm Bolster area: L–R: 950 mm F–B: 910 mm Ram area: L–R: 760 mm F–B: 510 mm Max. tool width (L–R): 970 mm Strip inlet height: Max.: 160 mm Min.: 70 mm Bdjdpfx Agjxzr Ruo Toi Strip feeder (left): Bruderer BBV 202/120 Max. strip width: 202 mm Feed pitch: 0–120 mm Bed opening: L–R: 920 mm F–B: 320 mm Machine dimensions: Length: 2834 mm Width: 1742 mm Height: 3460 mm Total weight with 1× BBV 202: approx. 17,500 kg Electrical cabinet dimensions: Length: 1200 mm Width: 500 mm Height: 1025 mm Weight: approx. 250 kg The soundproof cabin is not included in the offer, but it can be purchased separately. We also have many additional Bruderer, Schaal, Mabu and Bihler press models in stock, as well as decoilers and strip straighteners.

Condition: used, Year of construction: 1980, functionality: fully functional, Kohler straightening machine 30-400 - built in 1980 Number of straightening rollers 9 Max. belt width 400 mm GSW decoiler AHM 1500 - built in 1999 Mounted together on a base frame Bdsdpfev Hrltjx Ag Tsi Further data and pictures on request

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 000326, number of straightening rollers: 7, coil weight: 7,500 kg, coil outer diameter: 1,800 mm, coil inner diameter: 508 mm, product height (max.): 5 mm, number of feed rollers: 2, straightening roller diameter: 50 mm, sheet thickness steel (max.): 5 mm, coil width: 800 mm, Lg 35024 Belt conveyor in long design LORENZ BRM 50/820.7-HH7500.1 Coil weight max. 7500 kg Coil width max. 800 mm Bjdpfetrlzajx Ag Todi Material thickness 0.8 to 5 mm (steel with yield point approx. 300-350 N/qmm) Number of straightening rollers 7 Further data and detailed offer on request.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Reel - straightening - combination strip width: 360 mm Strip thickness: 0.6 - 3.5 mm Cross-section: 900 m² at 400 N/mm² - Straightening rollers: 7 - Single roller infeed - Infinitely variable speed control via frequency converter - 2 pneum. draw rollers Reel: - Coil weight: 2000 kg Bdodpfx Agjtq Sgno Tsi - manual spreading - pneum. pressure arm - common base frame

Condition: used, coil weight 2 x 0,15 t clamping range 265 - 485 mm band width 200 mm Thickness of sanding paper 0,1 - 4 mm total power requirement 0,25 kW weight of the machine ca. 180 kg dimensions of the machine ca. 1,2 x 0,9 x 1,2 m Bdsdpfx Aocdrmijg Tsi - motorized double-turn coiler - newly painted

Condition: used, Year of construction: 1994, Straightening roller diameter 18 mm Bsdpfxsrm Nk Is Ag Tsdi Number of straightening rollers 19 pieces max. strip width 260 mm Coil weight max. 2,000 kg / side further data and pictures on request used, as-is ex stock on request with overhaul, delivery time by arrangement

Condition: ready for operation (used), Year of construction: 1971, laoding capacity: max. 250 Kg. Bdjdpjdx Rzmsfx Ag Tei coil diameter: max. 650 kg. strip metal width: max. 100 mm