Milling machine

DECKEL FP1

Condition: used, Universal tool milling machine DECKEL type FP 1 Machine no. 51265 Year of manufacture approx. 1967 Travel X: 300 mm Y: 150 mm Z: 340 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20 x 2 Spindle speed: 40-2000 rpm, 16 steps Motor power: 1.0 and 1.6 kW, pole-changeable Power supply: 380 Volt, 50 Hz Hnedpfx Aoghtvajfiou - Power feed on X and Z axes - Spindle speed via 2 motor speeds and 8 gear stages - Quill travel on vertical milling head 60 mm - Fixed angle table - Separate control cabinet Required space L x W x H: 1100 x 1100 x 1600 mm Weight: 650 kg Good condition

Year of construction: 1969, condition: good (used), Univ. tool milling machine DECKEL type FP 1 Machine No. 37101 Year of construction approx. 1969 travel X: 300 mm Y: 150 mm Z: 340 mm table size 600 x 200 mm spindle mounting MK 4 - S20 x 2 spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal 60-1200 rpm. 12 steps motor power 1,0 and 1,5 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 6 gear steps - feed in X- and Z-axis - Coolant device with mechanical pump in machine base - pinol shift at vertical milling head 60 mm - adjacent control cabinet space requirement L x W x H 1000 x 900 x 1750 mm Hnsdpfx Afel Dx I Sjiou weight 690 kg good condition accessories: - collets - rotary table - vice - Counterholder H. Milling

Condition: good (used), functionality: fully functional, DECKEL FP1 Active milling machine Manufacturer: Deckel Type: FP1 Active Condition: very good Control type conventional Control active HEIDENHAIN TNC X-path 300 mm Y-path 160 mm Z-path 340 mm Tool holder SK40 Speed 40-2000 rpm. Control Active HEIDENHAIN TNC Total power requirement 2 kW Machine weight approx. 0.73 t Hsdsxnniajpfx Afienu Space requirement approx. TBH 1200x1100x1600 mm

Condition: good (used), Year of construction: 1992, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 210 x 600 mm table load max. 200 kg tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 730 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a research centre. Hjdpoxl Tcgefx Afijnu Equipment: 3-axis active digital readout made by Heidenhain TNC 113 Fixed angle table Coolant equipment Kelch mounting block Machine vise Counterholding device for the horizontal spindle

Condition: used, functionality: fully functional, Deckel FP1 milling machine. Hnedpfoxnxkuex Afiju Very good condition. Fully functional.

Condition: excellent (used), Year of construction: 1986, travel distance X-axis: 300 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 290 mm, Year of manufacture: 1986 Travel paths: X = 300 mm Y = 160 mm Z = 290 mm Equipment: Hedswgafyopfx Afienu Standard accessories Vertical milling head, SK 40/20x2 Fixed angle table 210 x 600 mm, NEW! Retrofitted safety device for milling spindle, electrically protected, NEW! Active digital display (TNC113), 3 axes Coolant system Machine light Machine feet Documentation Condition: Good, mechanics and control system workshop-tested

Condition: ready for operation (used), Working travels 300x150x340mm Universal table 600x260mm Spindle taper 40 Spindle speeds 40-2000 rpm Hnodedr E Apopfx Afiju Digital read-out Misc.accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 1980, machine/vehicle number: 4038, travel distance X-axis: 290 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 330 mm, mount diameter: 40 mm, table length: 600 mm, table width: 210 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 40 rpm, overall weight: 700 kg, CONDITION & NOTES: - This is an active, path-controlled tool milling machine Hsdpfjwxpxmsx Afijnu

Condition: good (used), Offered for sale is a partially overhauled DECKEL FP1 Aktiv universal milling machine, equipped with a 3-axis Heidenhain digital readout TNC 113 and a dividing rotary table with a three-jaw chuck. Thanks to its compact design, this machine is ideal for smaller hobby workshops or garages. Manufacturer: DECKEL Model: FP1 Machine no.: 2102-3314 - Travel X/Y/Z 300 x 160 x 340 mm - Spindle speed range 40–2000 rpm - Stepless feed in all three axes - Rapid traverse in all three axes - Vertical milling head - 100 mm adjustable vertically - Horizontal milling attachment - 3-axis Heidenhain digital readout TNC 113 - Coolant system - Dividing rotary table with a three-jaw chuck Total power requirement: 1.9 kW Machine dimensions (L x W x H): 1.30 x 1.10 x 1.60 m Weight: approx. 850 kg Hjdpfx Afjxmggusijnu Price is quoted net, ex-works, loaded. Condition: Used.

Condition: reconditioned (used), Year of construction: 1994, Universal Tool Milling Machine DECKEL FP 1 Hjdpfxew Agxro Afijnu With 3-axis active digital readout Heidenhain TNC 123 Year of manufacture: 1994 Travel: X 300 mm, Y 160 mm, Z 340 mm Spindle speed range: 40 – 2000 rpm Comes with the following accessories: Fixed angle table, 600 mm x 250 mm clamping surface Movable vertical milling head Extendable quill Infinitely variable feed via potentiometer 1 machine vice 1 tailstock with counter bearing 1 long milling arbor Ø 22 mm, Ø 16 mm, Ø 27 mm Various tool holders S 22 x 2 Z axis bellows 1 chip guard Machine lamp Automatic central lubrication pump Coolant system Operating manual THE MACHINE IS IN EXCELLENT CONDITION! THE MACHINE COMES FROM A TRAINING WORKSHOP!