Tool milling machine

Deckel FP1

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 30000452, travel distance X-axis: 300 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 340 mm, quill travel distance: 60 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, table length: 600 mm, table width: 210 mm, overall weight: 710 kg, table load: 200 kg, Equipment: documentation/manual, DECKEL FP1 – completely overhauled in 2012 by FPS (Germany), equipped with Heidenhain digital display, tool cabinet with accessories, and dividing head. Since the overhaul, the machine has seen very light use and is therefore in like-new condition. Pjdpfsxywhcox Aalepl About FPS: Specialized in the complete refurbishment of DECKEL machines. MANUFACTURER: DECKEL MODEL: FP1 CONDITION: Overhauled (2012) – mechanically and electronically as new! LOCATION: Graz (Austria) IMAGES/VIDEOS: For additional photographs and videos of the machine in operation, please contact us. Description: This high-quality DECKEL FP1 milling machine has been completely refurbished, with both mechanical and electrical components upgraded to the latest standards. A new CE-compliant control cabinet was installed in accordance with current statutory requirements (BGVA 3 / DIN-EN 60204-1, new machinery standard). During the overhaul, the control system, drive package, and drive motors were all replaced and brought up to date. The modernization also included the installation of a new, touch-safe control panel and new motor. Technical data: Operation: manual, with option for automatic positioning Control: 3-axis Heidenhain digital readout Spindle speed range: 40 – 2000 rpm (geometrically stepped, 16 speed stages) Feed rate: 10 – 500 mm/min (stepless adjustment) Rapid traverse: 1.2 m/min (stepless adjustment) Quill: Vertical & horizontal extension 60 mm, SK40 Travel (X/Y/Z): 300 / 150 / 340 mm Table size: 600 × 210 mm Table load: max. 200 kg Machine weight: 710 kg incl. angle table and milling head Footprint: 1600 x 1400 x 1750 mm (W / D / H) Equipment: Vertical and horizontal spindle Milling head manually swivels ± 90° Completely new electrics and drive packages Overhauled – mechanically and electronically as new Extras: Z-axis bellows Special paintwork Highlights: Heidenhain digital readout for precise operation During overhaul, entire control system, drive package, and drive motors were renewed Contact us to arrange a viewing appointment.

Condition: used, Year of construction: 1990, x-travel 400 mm y-travel 330 mm z-travel 350 mm total power requirement 6,3 kW weight of the machine ca. 2 t Podpet Hxbwofx Aaljpl dimensions of the machine ca. 736 m

Condition: good (used), functionality: fully functional, I am offering for sale a Deckel FP1 milling machine in excellent condition. Everything works perfectly. The machine was used for precision components in fine mechanics, so there has been no unusual strain on the bearings or guides. I am only selling the machine because I operated my small workshop as a side business and now wish to sell it due to my age. Ppjdpfxjyfibmo Aalel

Condition: good (used), Offered for sale is a partially overhauled DECKEL FP1 Aktiv universal milling machine, equipped with a 3-axis Heidenhain digital readout TNC 113 and a dividing rotary table with a three-jaw chuck. Thanks to its compact design, this machine is ideal for smaller hobby workshops or garages. Manufacturer: DECKEL Model: FP1 Machine no.: 2102-3314 - Travel X/Y/Z 300 x 160 x 340 mm - Spindle speed range 40–2000 rpm - Stepless feed in all three axes - Rapid traverse in all three axes - Vertical milling head Podoxmgguopfx Aaljpl - 100 mm adjustable vertically - Horizontal milling attachment - 3-axis Heidenhain digital readout TNC 113 - Coolant system - Dividing rotary table with a three-jaw chuck Total power requirement: 1.9 kW Machine dimensions (L x W x H): 1.30 x 1.10 x 1.60 m Weight: approx. 850 kg Price is quoted net, ex-works, loaded. Condition: Used.

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Machine No. 51265 Year of manufacture: approx. 1967 Ppodpfx Asghtvajaljl Travel paths X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle taper SK 40 - S20 x 2 Spindle speed 40–2000 rpm, 16 steps Motor power 1.0 and 1.6 kW, pole-changing Power supply 380 Volt, 50 Hz - Feed on X and Z axes - Spindle speed via 2 motor speeds and 8 gear steps - Quill movement at vertical milling head 60 mm - Swiveling, rotating, and tilting angle table - Coolant pump in machine base - Separate control cabinet Space requirements L x W x H 1100 x 1100 x 1600 mm Weight 690 kg In good condition

Condition: ready for operation (used), travel distance X-axis: 300 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 340 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, position of the milling head: SK40, input voltage: 400 V, Deckel FP1 2 axis Active Displacements: X = 300 mm Y = 160 mm Z = 340 mm Speed 40-2000 Rpm Automatic feed and rapid traverse on the X, Y and Z axes. Continuously adjustable. Table dimensions 600 x 260 mm 2 axes Active control, point-to-point control. Ppodpfx Ajvuzg Ajalol 3 axis digital readout from Heidehain. Spindle mounting SK40 Deckel mounting (outside thread)

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min Ppjdoyangqjpfx Aalel spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: used, Year of construction: 2009, Spindle head diameter: 75 mm Spindle taper: Morse 5 Ppjdsvwbccopfx Aaljl Spindle stroke: 350 mm Min./max. overhang from the surface of the casing to the spindle axis: 1170/2070 mm Min./max. radius at the extreme positions of the spindle: 1370/2270 mm Min./max. distance of the spindle head in the vertical position (with the spindle retracted) from the floor: 305/1555 mm Min./max. distance of the spindle axis in the horizontal position from the floor: 295/2725 mm Vertical adjustment of the arms (stroke): 1250 mm Horizontal adjustment of the arms (travel): 900 mm Arm rotation: 360° Headstock rotation: 360° Headstock rotation from the horizontal position up/down: 90° / 90° Slide travel along the bed (extended): 2500 mm Shell diameter: 400 mm

Condition: excellent (used), functionality: fully functional, Deckel FP1 milling machine. Very good condition. Fully functional. Psdpfxexgdr Ie Aalepl

Condition: reconditioned (used), Year of construction: 1994, Universal Tool Milling Machine DECKEL FP 1 With 3-axis active digital readout Heidenhain TNC 123 Year of manufacture: 1994 Travel: X 300 mm, Y 160 mm, Z 340 mm Spindle speed range: 40 – 2000 rpm Comes with the following accessories: Fixed angle table, 600 mm x 250 mm clamping surface Movable vertical milling head Extendable quill Infinitely variable feed via potentiometer Podow Agxrepfx Aalspl 1 machine vice 1 tailstock with counter bearing 1 long milling arbor Ø 22 mm, Ø 16 mm, Ø 27 mm Various tool holders S 22 x 2 Z axis bellows 1 chip guard Machine lamp Automatic central lubrication pump Coolant system Operating manual THE MACHINE IS IN EXCELLENT CONDITION! THE MACHINE COMES FROM A TRAINING WORKSHOP!

Condition: good (used), functionality: unexamined, machine/vehicle number: 10279, turning diameter over cross slide: 200 mm, spindle bore: 35 mm, turning diameter: 300 mm, center height: 150 mm, turning length: 750 mm, total length: 1,860 mm, total width: 700 mm, total height: 1,800 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 40 rpm, overall weight: 1,030 kg, - Operating voltage: 380 V Podpfxjv Irgto Aaljpl - Connected load: 3 kW - Nominal current: 25 A - Frequency: 50 Hz Equipment: - Tailstock - Multifix type B tool holder - Three-jaw chuck (diameter: 160 mm) - 2-axis digital display from the manufacturer RSF

Condition: reconditioned (used), feed length X-axis: 300 mm, feed length Y-axis: 160 mm, feed length Z-axis: 340 mm, Updated Machineseeker description (with travel distances) Deckel FP1 Aktiv – 3 axes – partially overhauled – ready for immediate use Offered for sale is a Deckel FP1 Aktiv in technically inspected and partially overhauled condition. The machine has been professionally refurbished and is in a reliable, operational state. Ideally suited for workshops, toolmaking, training, as well as single part and small batch production. This is not an unchecked used machine but a technically overhauled tool machine with a clearly defined scope of performance and a predictable delivery time. Technical data and features Travel distances: X-axis approx. 300 mm Y-axis approx. 160 mm Psdpfx Ajx Tdy Ioalspl Z-axis approx. 340 mm 3 axes with Aktiv control and digital readout Stepless feed on all 3 axes Coolant system Brake motor Fixed angle table New LED work lamp New leveling feet Technical documentation in PDF format Scope of refurbishment Workshop tested and partially overhauled Technical inspection of all functions Repair or replacement of defective components Complete basic cleaning Readjustment of all existing adjustment options Renewal of all lubricants Replacement of selected standard and various wear parts New paint finish in RAL 7035 / 7016 The conscious decision for a partial overhaul provides an optimal compromise between operational reliability, cost-effectiveness, and availability. A complete overhaul of the guideways was not carried out, as there was no technical necessity for this. Scope of delivery Machine loaded free of charge Delivery time approx. 12 weeks

Condition: reconditioned (used), Year of construction: 1990, Universal Tool Milling Machine Ppjdpfx Ajx S Edloalsl Make: DECKEL Model: FP 1 Aktiv Year of manufacture: 1990 – workshop-inspected Machine no.: 2102-5866 Milling head type: 2171 Milling head no.: 4613 Geometric inspection with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X, Y, and Z axes - Universal table 590 x 250 mm (T-slot: 12 mm) - Vertical milling head SK 40 with pull stud thread S 20 x 2 - Without coolant system; can be retrofitted if required - Centralized lubrication, electric - Operating manual Used as seen, sold without warranty The machine is technically in the condition of its year of manufacture.

Condition: good (used), Magnetic table 455 x 170 mm Pjdpjtu Il Tofx Aaljpl digital display water tank Honing device Wet sanding device

Condition: good (used), Electric motor, three-phase motor, brake motor -Manufacturer: Siemens, electric motor type 1LC3113-4BB23 Z from milling machine Deckel FP4L -Power: 4.0 kW -Speed: 1435 rpm Ppodpoul H Dwjfx Aalol -Design: B14 -Protection class: IP 44 -Brake: multi-disc brake type EK5dB24 -Dimensions: 575/270/H225mm -Weight: 64 kg