Spot welding machine

DALEX SF8/71

Condition: excellent (used), water-cooled, foot-operated swing lever spot welding machine make DALEX type SF 8/71 rated power at 50 % ED: 8 kVA sec. short circuit current: 8,8 kA Sec. open-circuit voltage: 2.0 - 3.2 V Itodpfop H T Awsx Ah Nob Electrode force: 52-235 daN arm distance: 140 mm arm reach: 80-300 mm adjustable with 4-step switch 1-time asynchronous welding control current time 2-100 Per

Condition: good (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 01093.01-808, A used L&Z lathe, manufacturer: VDF BÖHRINGER, type: DUE 630, year of manufacture: 1986, machine number: 01093.01.-808. Turning length: 3000 mm Turning diameter: 630 mm. Equipped with 2 steadies, chuck, faceplate, and Multifix toolholder. Iodpfxsxd Df Nj Ah Nstb

Condition: used, current capacity 8,0 kVA throat 80 - 480 mm contact pressure capacity 17 - 235 daN horn spacing 140 mm mm rated capacity 8,0 kVA voltage 380 V total power requirement 17,8 kVA Ijdpextqv Tjfx Ah Netb weight of the machine ca. 77,5 kg dimensions of the machine ca. 0,35 x 0,80 x 1,05 m - Serial-No.: 18310126 - 2

Condition: new, Year of construction: 2025, The drilling and milling machine can be used for drilling, reaming and expanding holes up to 45/40 mm in cast iron and threading screws up to M12 mm, milling up to 80 mm wide, and notching up to 22 mm. It is also suitable for cutting and face milling. The machine is available from stock. Machine characteristics The machine can be used for drilling, reaming and expanding holes up to 45/40 mm in cast iron and threading screws up to M12 mm, milling up to 80 mm wide, and notching up to 22 mm. It is also suitable for cutting and face milling. Various accessories can be fitted to it. HEAVY, STABLE CAST IRON THE HEIGHT OF THE ROUTER IS ADJUSTABLE ON THE SLIDE AND NOT ON THE COLUMN SOLID CROSS TABLE FOR THE MILLING/DRILLING MACHINE WITH PRECISION GROUND SURFACE DOVETAIL GUIDES, QUIET RUNNING THANKS TO GROUND GEARS LEFT AND RIGHT ROTATION OPTIONAL HEAD +/- 90 degrees ADJUSTABLE HEAD HEIGHT Machine base available as an optional extra - 200€ Technical data MAXIMUM DRILLING SIZE 45 mm MAXIMUM FACE DRILLING 80 mm Iedpfxeud H Hus Ah Nstb MAXIMUM FACE MILLING 28 mm MAXIMUM THREADING 12 mm SPINDLE PASSAGE 120 mm SPINDLE TAPER MT4 SPINDLE SPEED (6 MOTOR SPEEDS 1400r/min ) 95,170,280,540,960,1600min-1 MAX. DISTANCE FROM SPINDLE TIP TO TABLE 475 mm DISTANCE FROM SPINDLE TO COLUMN SURFACE 260 mm WORKING TABLE DIMENSIONS 820 x 240 mm TABLE TRAVEL 550 x 170 mm MOTOR 1,1kW / 1,5hp Voltage (two options to choose from) 400V (three-phase motor) PACKING DIMENSIONS 1140 x 800 x 1040 mm NET WEIGHT 270 kg Available accessories MK4/B18 drill chuck shank handy tools Drill chuck 3-16 mm/B18 reduction sleeve MK4/MK3 reduction sleeve MK3/MK2 instruction manual in Polish

Condition: good (used), Year of construction: 1989, machine/vehicle number: 01-15792, Offer 24194 Technical data: - max. working width 2040 mm Itodpfxetylgue Ah Nob - max. material thickness 2 mm - Bending angle approx. 0 - 135 ° - Bending angle lockable with end stop - Upper beam is operated with side hand crank - max. stroke upper beam 85 mm - Max. adjustment of bending beam 80 mm - Bending process is supported by eccentric weight - Space requirement approx. W 3250 x H 1250 x D 450 mm - Weight approx. 1620 kg

Condition: used, machine/vehicle number: 632/6, pressure:30 t no. of strokes:100-600 Hub/min sheet width:120 mm table-size:480 x 450 mm Bruderer Double Roll Precision Feed:links stroke adjustable from - to:16-40 mm Ijdpecxxycefx Ah Notb distance between columns:330 x 300 mm dimensions of the machine ca.:2,10 x 1,65 x 0,75 m with air cooler, piece counter, separate electrical cabinet, air clutch, BRUDERER precision double-roll feeder on left side, machine technically, mechanically and optically as new

Condition: excellent (used), Grinding length 1000 mm grinding diameter fi 350 mm In very good condition. Itjdsk Abxxspfx Ah Njb

Condition: new, Year of construction: 2025, Bending machine PROD-MASZ to the plate ZGR 2640/1.2 is a sensational machine for precision bending of all types of metal sheets (steel 1.2mm, titanium zinc 1.2mm, aluminum of 1.5 mm, copper sheet 0.8 mm). Equipped with a rack supporting plate, two front bumpers, bending angle measurement, a single lock of bending angle, turnbuckles, eccentric mechanisms. Each part of the machine is adjustable, which allows for adjustment of the arc bending. Used in the device locking system (set by the operator) allows you to achieve the desired angle of bending. Table rear and front bumpers are made of galvanized racks. Ideal for all kinds of steel treatments - wherever the roof is exposed to moisture infiltration. Proper execution of these connections certainly prolong the life of the roof. By hers construction she can be used not only for bending panels with both the ferrous metal, sheets of plastic and fiberboard. - Max. bending angle: 145 degrees - Rotary shears cut to full working length - Thickness of bending bar: 24 mm - Protractor - Weight: 350 kg Iedpfx Asdad Adeh Netb Rotary shears (max. plate gauge 0,8 mm / Steel) + 350 Euro - The machine have certificate CE and 12 months warranty. Only shipping is possible Delivery every week Price excl. shipping We provide invoices with 0% of tax.

Condition: excellent (used), Year of construction: 2010, Control: Siemens Sinumerik 840D Work Area Swing diameter over bed: 820 mm Swing diameter over cross slide: 520 mm Cross slide travel: 600 mm Tool Holder: Front: Capto size C6 – Multifix D1 Rear: Boring block with clamping claw Centre Distance: 3,000 mm Main Spindle Drive Power digital AC motor – 60% duty cycle: 46 kW Number of gear stages: 2 (ZF planetary gearbox, electrically shifted, mounted outside the headstock) Headstock Spindle nose DIN 55027 / Bore (standard): 11 / Ø 132 mm Spindle diameter in front bearing: 190 mm Speed range (constant V): 1 – 1800 rpm Standard chuck sizes: Ø 315, Ø 400, Ø 500 mm Spindle nose DIN 55026 / Bore (option): A 11 / Ø 164 mm Spindle diameter in front bearing: 210 mm Speed range (constant V): 1–1600 rpm Itodpfxexgdfbs Ah Neb Cross Slide Transverse feed range: 0.001 – 1000 mm/min Longitudinal feed range: 0.001 – 2000 mm/min Thread pitches: 0.01–999.999 mm Rapid traverse transverse/longitudinal: 5/10 m/min At centre distance: 4,000 mm Transverse feed force: 16,000 N Longitudinal feed force: 22,000 N Turning tool section: 40 x 40 mm² Tailstock Quill diameter: 125 mm Quill travel: 280 mm Taper: 6 Mk Electrical Equipment Three-phase: 400 V, 50 Hz Design in accordance with VDE and EMC guidelines EN50081-2 / EN 50082-2 Interference suppression level A according to EN 50081-2 For TN-S or TN-C networks / industrial networks without RCD protection Dimensions Machine (L × W × H) = 2.88 m + centre distance × 2.55 m × 2.32 m Machine Weight (Centre distance / weight approx. kg) 3000 mm: 10,900 kg

Condition: new, Year of construction: 2024, A vineyard post roll forming machine is used for vineyards and orchards to produce the stakes and posts. Normally, grape posts are 1.5-2mm thickness. The production line consists of Decoiler, Servo Feeder Straightener, Press, Stamping Tool, Roll Form Machine and Shear. Itedpfx Aot Tcz Uoh Njb