Hydraulic Hose Crimper CrimpOne C-140B

CrimpOne C1-140B

Condition: like new (used), Year of construction: 2022, 600 kg load capacity, height-adjustable welding rotary table with through-hole, 100–200 mm Plate diameter: 700 mm Horizontal height: min. 0.65 m, max. 1.25 m Tilted height: min. 0.45 m, max. 0.95 m Pgodpfxed Anz Re Amysp Speed: 0.01–1.1 rpm Tilt angle up to 135° Hand and foot remote control with speed display Very robust

Condition: like new (used), Working width 1350 mm The machine is in excellent, new condition as shown in the pictures. Pjdpfx Ameuuitgsyogp

Condition: used, color: yellow, first registration: 01/1995, * Manufacturer: HYSTER, * Model: H2.50XM, * Serial number: D177B22181S, * Attachment: S/S 2.00-1.50 1067 mm, * Year of manufacture: 1995, * Drive: Diesel, * Operating hours: 18151.8 h, * Unladen weight: 4265 kg, * Mast tilt: 6 degrees, * Tire size: 7.0 x 12 (front), 6.0 x 9 (rear), * Tire pressure: 0 (front / rear), * Track width: 1125 mm, * Load capacity with vertical mast and attachment as specified above, * Lifting height: 5550 mm, Pgodpfx Aji Tfapjmyop * Load capacity: 2040 kg at 500 mm, 1860 kg at 600 mm, 1710 kg at 700 mm. Subject to changes, prior sale, and errors.

Condition: excellent (used), Year of construction: 2006, Technical data: - working width 1350mm Pgjdpfx Aevdtxiemysp - pneumatic oscillation - vacuum table - Stand alone machine ( Table raise/fall ) 1 Combi unit: - motor power 18,5kW - steel calibrating roller - stepless adjustment of the belt speed - sectional pad (52 sections of 26mm each) 2 Combi unit: - sectional pad (52 sections of 26mm each) - motor power 7,5kW - stepless adjustment of band speed - brush on the exit of the material - stepless regulation of feed speed - pneumatic cleaning of belts

Condition: excellent (used), Working width: 1,360 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,360 x 1,900 mm Variable feed speed: 7 - 14 m/min Feed motor power: 1.1 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 2,160 x 2,260 x 2,025 mm Weight: approx. 2,200 kg 1st unit: Steel contact roller Motor power: 15 kW, 400 V, 50 Hz 2nd unit: Sanding pad, rigid for fine sanding of solid wood & pneumatically controlled (timed) for veneer sanding 3rd unit: Cleaning brush Abrasive belt oscillation with selector switch Pedpfx Amsych Igeyegp Feed conveyor oscillation pneumatic Motorized workpiece thickness adjustment with LED display Units equipped with emergency brake device Emergency stop button at infeed Roller table extension at infeed Complete documentation included Note – Used machines: • Subject to technical changes and prior sale. • Prices quoted are ex location – loaded on truck! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, with no warranty or guarantee. Buyers are free to inspect the machines at the site. • Special agreements are only valid in writing. (We will only respond to inquiries that include your address and telephone number!)

Condition: used, Year of construction: 1994, Max. passage height: 160 mm Sanding belt length, unit 1: 1900 mm Max. working width: 1350 mm Number of belts: 2 Belt, unit 1: Calibrating roller, grooved, rubber design Unit 1: Steel, grooved Sanding belt width, unit 1: 1350 mm Unit 2: Combination sanding unit Design, unit 2: Roller/shoe Control: Manual control panel, electric/pneumatic Podpfx Amjy Naq Ueyjgp Belt oscillation: pneumatic Infeed height: fixed (top section moves) Table stroke: electro-mechanical Table display: mechanical numerical display Working height or feed table height: 900 mm Location: Nattheim

Condition: like new (used), Year of construction: 2020, machine/vehicle number: C1-140_11, functionality: fully functional, operating hours: 10 h, CrimpOne C1-140 Hydraulic Hose Crimper Technical Specifications Max. crimping force: 1400 kN Crimp range: 10 - 61 mm Max. hose size: 1 1/2 inch Die type: 140 Max. opening: +25 mm Max. die length: 80 mm Servo motor: 3 kW Power supply: 380 V Crimps per hour: 850 pcs Length: 600 mm Width: 435 mm Height: 630 mm Weight: 135 kg Noise level: 71 dB(A) Available immediately from stock! Pjdpjy A Nv Hsfx Amyogp

Condition: good (used), Year of construction: 2000, functionality: fully functional, Wide belt sander SCM Sandya 40 M1 Year of manufacture 2000 S/N AE/020761 Manufacturer SCM Group S.p.A Italy Sanding width 1.350 mm Workpiece thickness min 4-170mm 1 sanding unit, calibration 250mm diameter Roller hardness °Shore 55 Vacuum table Main motor 11 kW ( 15 HP) Sanding belt length 2,620 mm Feed max 19 m/min Feed stepless Fixed working height 900 mm Sanding belt blow-off device Electropneumatic segment control Belt change side left SYEL CN 51 control unit Carpet feed with speed controller Electronically controlled sanding belt oscillation Main motor with disk brake Rubber-coated pressure rollers Automatic carpet centering Automatic table positioning Air requirement Nl/min 15 Operating voltage 400V/ 50 Hz Total power 40 Amp Podpfstttafox Amyogp Dimensions: L x W x H= 1917mm x 2134 x 2365mm Weight approx. 2540 kg

Year of construction: 2026, operating hours: 10 h, condition: new, functionality: fully functional, machine/vehicle number: C1-25sE_2, CrimpOne C1-25sE - Made in Finland Servo-electric hose press with spindle drive Technical data Main technology: AC servo ball screw Max. pressing force: 250kN Pgjdpfx Amey A Nvyjyop Crimp range: 10 - 54 mm Max. hose size: 1¼ inch Master die D / L: 84 / 78 mm Servo motor: 5kW Repeatability: 0.01 mm Max. opening: +100 mm Max. feed channel: 45 mm Max. closing speed: 80 mm/s Max. opening speed: 80 mm/s Max. crimping speed: 10 mm/s Length: 1250 mm Width: 850 mm Height: 2100 mm Weight: 700 kg Control: TC12 - Omron touchscreen

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, working width: 1,300 mm, overall weight: 4,700 kg, height adjustment type: electric, Wide-belt sanding machine Manufacturer: Viet Type: S3 223 TM Year of manufacture: 2006 (CE) Pgedpfxozd Ayls Amysp Well-maintained calibrating and fine-sanding machine from a small carpentry/manufacturing workshop, suitable for sanding solid wood, veneer, and lacquered surfaces. Working width: 1300 mm Constant table height, motorized height adjustment of the machine’s upper part (the machine is also suitable for inline operation). Automatic workpiece detection, thickness measurement, and infeed protection. 1x cross-sanding unit, sanding belt dimensions: 150 x 5520 mm 1x combination unit with calibrating roller and electronic segmented sanding shoe, segment pitch: 25 mm 1x cleaning brush for removing dust from workpieces 1x ionizer to prevent static charging Feed rate infinitely adjustable Vacuum transport for small, short, or slippery workpieces (e.g., lacquered parts) Operating voltage: 400 V, 50 Hz, 3 phases Dimensions: approx. 2500 x 2850 x 2280 mm (L x W x H) Weight: approx. 4700 kg