Wide belt sanding machine / Constant speed machine

Kündig Enorm Duplex 1350

Condition: new, Year of construction: 2026, Size: 6 Nominal heat output: 170 kW -- Compliant with German Federal Immission Control Ordinance (BImSchV) Stage 2 and CE standards -- Firebox completely lined with refractory bricks Suitable for rooms of: 4,800 m³ (according to DIN) Fuel: Logs, chipboard, wood chips, wood chip briquettes Fuel consumption: 40 - 50 kg/h Blower air capacity, free-blowing: 14,000 m³/h Exhaust outlet: Ø 700 mm Ledpfxsdlhdbo Aiiohh Smoke pipe connection: Ø 220 mm Weight: 2,150 kg PLC control cabinet: 380 volts

Condition: not inspected (used), Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm 1 used Weinig Unicontrol 6 window system ----- Manufacturer's description: For the production of individual parts, elements, and small series. Spindle arrangement: One cross-cutting saw, one single-sided tenoning and slotting spindle, one right-hand profiling spindle, one tenoning and slotting spindle, and profiling spindle suitable for holding multiple tools stacked on top of each other, with pneumatic spindle movement. Slotting table with motorized table movement and automatic transfer to the continuous, chainless rubber roller feed of the profiling unit. Feed height adjustment manually. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifying glass for frame or sash external dimensions. Tool positions (longitudinal and transverse machining) controlled via selector switch on the control panel. Lhodpex Tu N Hjfx Aiish Technical Specifications ----- Crosscut Saw ----- Number of Tools: 1 Spindle Speed: 2,800 rpm Spindle Diameter: 40 mm Max. Tool Diameter: 350 mm Motor: 3 kW Mortise and Slot Spindle ----- Number of Tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle Speed: 3,500 rpm Spindle Diameter: 50 mm Tool Clamping Length: 320 mm Max. Tool Diameter: 320 mm Motor: 11 kW Profile Spindle ----- Number of Tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle Speed: 6,000 rpm Spindle Diameter: 50 mm Tool clamping length 320 mm Max. tool diameter 232 mm Motor 11 kW Special equipment: Synchronous spindle ----- Pneumatically timed forward/backward for tear-free rerouting of window sashes, frames, and doors. Spindle diameter 50 mm, 4 kW Tool clamping length 120 mm, zero tool diameter 112-140 mm Max. tool diameter 232 mm, spindle speed 6000 rpm Motor boost for synchronous spindle from 4 kW to 7.5 kW Screen control for 99 window types. One type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Production options: single parts, double parts, frame-by-frame, series, rerouting. Data entry via keyboard with integrated operator guidance and error diagnostics. 1 Grooving spindle from above ----- Motor power: 2.2 kW Speed: 6000 rpm Spindle diameter: 40 mm, with 10 x 4 mm key Clamping length: 13 mm Clamping length: 40 mm Axial stroke, 2 positions Radial stroke, 2 positions Max. tool diameter: 130 mm Grooving spindle motor boost from 2.2 to 3 kW 1 Fitting milling unit, right: ----- For milling fitting grooves in the circumferential milling pass or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch on the control panel. Motor power: 2.2 kW Speed: 6000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Tool cutting radius: min. 140 mm, max. 180 mm Home position below table level: 10 mm Special design of the fittings milling machine: Clamping length 150 mm Axial stroke 80 mm, 3 positions 3 tools Radial cycle, 2 positions Motor booster for the hinge milling spindle from 2.2 to 3 kW Hinge milling spindle for 230 mm tool diameters in and above the table Electric height adjustment of the feed with selector switch on the co...

Condition: like new (used), Working width 1350 mm Lsdpjuuitgjfx Aiiohh The machine is in excellent, new condition as shown in the pictures.

Condition: excellent (used), Year of construction: 2006, Technical data: - working width 1350mm - pneumatic oscillation - vacuum table - Stand alone machine ( Table raise/fall ) Lsdpfx Aijvdtxijiohh 1 Combi unit: - motor power 18,5kW - steel calibrating roller - stepless adjustment of the belt speed - sectional pad (52 sections of 26mm each) 2 Combi unit: - sectional pad (52 sections of 26mm each) - motor power 7,5kW - stepless adjustment of band speed - brush on the exit of the material - stepless regulation of feed speed - pneumatic cleaning of belts

Condition: used, Year of construction: 2005, Number of belts: 2-belt max. Passage height: 150 mm max. Working width: 1350 mm 1st unit: combined sanding unit Design of 1st unit: steel contact roller, sanding shoe 1st unit: electronic individual segments 35 mm Sanding belt length of 1st unit: 1900 mm Sanding belt width of 1st unit: 1370 mm Sanding belt speed of 1st unit: 18 m/sec 2nd unit: combined sanding unit Design of 2nd unit: rubber-coated contact roller 65° Shore, sanding shoe 2nd unit: electronic individual segments 35 mm Sanding belt length of 2nd unit: 1900 mm Sanding belt width of 2nd unit: 1370 mm Sanding belt speed of 2nd unit: continuously variable 2 - 18 m/sec Belt blowing device: for 2nd unit Cleaning brushes: Yes Finish sanding possible: Yes Vacuum carpet: Yes Feed rate: continuously variable from 2.5 - 13 m/min Control: Touch screen, electric/pneumatic Belt oscillation: yes Infeed height: fixed (top part moves) Table display: digital Working height or table height: 900 mm Motor power: 36 kW Storage location: Nattheim Lhsdpoytrf Refx Aiijh

Condition: used, Year of construction: 1991, Used machine Year of manufacture: 1991 Equipment and technical data: - Complete drying system with trolley, high-performance radial fan, electric heater, - Air inlet and outlet flaps, safety thermostat, spray device - Lifting swivel door for convenient opening and closing of the dryer - Interior lining: all side walls are made of seawater-resistant special aluminum - The stainless steel floors are permanently resistant to aggressive wood preservatives such as tannic acid, etc. - The sealing of the connecting joints is absolutely resistant and also allows steaming in the system - Stacking dimensions: 530 x 105 x 115 cm - Stacking volume: 6.4 m³ - External dimensions: approx. 690 x 140 x 200 cm - Heater: 12 kW Lhsdpfjy R Ha Ssx Aiieh - Motor: 1.1 kW / 400 V - with MP 902 control system Availability: short notice Location: 63934 Röllbach

Condition: used, Year of construction: 1976, Used machine Year of manufacture: 1976 Equipment and technical data: - Underside sanding - Material feed via rubber rollers - Non-contact oscillation control - Quick-change pressure beam - Electromotive adjustment of the tool thickness with an easily readable digital display - Push-button control with contactor - Sanding width: 1350 mm - Maximum workpiece thickness: 150 mm - Sanding belt width: 1360 mm Lhodpfxjwpm I Ts Aiioh - Sanding belt length: 1900 mm - Feed rollers switchable: 10 + 20 m/min - Compressed air connection: 6 bar - Air requirement: approx. 180 NL/min - Motor power: 17.5 kW - Dimensions (W x D x H): 1800 x 1100 x 1520 mm - Weight: 2600 kg Availability: short notice Storage location: 63934 Röllbach

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Working area: 2700 x 1250 mm Z-axis travel: 160 mm Rotary axis: C-axis Spindle motor power: 8.5 kW Spindle speed: 24,000 rpm Tool changer (carousel): 8 tools (auxiliary magazine) Main tool magazine: 10 tools Saw unit along X and Y axes Vertical drills along X-axis: 8 pcs Vertical drills along Y-axis: 5 pcs Horizontal drills along X-axis: 4 pcs Horizontal drills along Y-axis: 4 pcs Tool holder type: HSK 63 Lodpfjwp R Eijx Aiishh Central lubrication pump Vacuum raster table Edge milling unit along X-axis Year of manufacture: 2011

Condition: excellent (used), Working width: 1,360 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,360 x 1,900 mm Variable feed speed: 7 - 14 m/min Feed motor power: 1.1 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 2,160 x 2,260 x 2,025 mm Weight: approx. 2,200 kg 1st unit: Steel contact roller Motor power: 15 kW, 400 V, 50 Hz 2nd unit: Sanding pad, rigid for fine sanding of solid wood & pneumatically controlled (timed) for veneer sanding 3rd unit: Cleaning brush Lsdjych Igepfx Aiijhh Abrasive belt oscillation with selector switch Feed conveyor oscillation pneumatic Motorized workpiece thickness adjustment with LED display Units equipped with emergency brake device Emergency stop button at infeed Roller table extension at infeed Complete documentation included Note – Used machines: • Subject to technical changes and prior sale. • Prices quoted are ex location – loaded on truck! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, with no warranty or guarantee. Buyers are free to inspect the machines at the site. • Special agreements are only valid in writing. (We will only respond to inquiries that include your address and telephone number!)

Condition: good (used), Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -EXACTLY -Take: Ø 50 mm -1x pallet tool -different sizes -Weight including pallet: 346 kg Lodpfsb A Rg Sox Aiijhh