Bench grinder

Cordia Ø300x40

Condition: used, GRUNDFOS vertical multistage high-pressure centrifugal pump Pump in like-new condition, but a part of the magnetic coupling has been removed. Type CRN 10-09 MP-FGJ GI-V Year of manufacture: approx. 2012 Flow rate at 7.2 bar: max. 10 m3/h Head: max. 91.8 meters Power supply: 400 volts, 50 Hz Power: 3 kW - Pump design with 9 stages - Made of stainless steel 1.4401 - The like-new pump was used as a source of spare parts, but several new pump chambers are included - A part of the magnetic coupling is missing Suitable for potable water supply, irrigation, and drainage Packaged in the original wooden crate Pump dimensions (L x W x H): 1100 x 250 x 300 mm Shipping crate dimensions (L x W x H): 1400 x 330 x 340 mm Weight with shipping crate: 85 kg Like new Not a submersible pump or a deep-well pump. Kodpfefupadex Accenc

Condition: used, machine/vehicle number: 053051, grinding area: 200 x 25 mm electrical connection: 380 V, 0,5 kW space needed: 550 x 450 x 1100 mm Knjdpfxjbfp Ixj Accoc weight: 95 kg

Condition: used, Ladegerät - Charger for forklift Jungheinrich E 220 G 24/65 B-ET-DA Kjdpfx Acjh Axztoconc Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2004, Suitable for automatic grinding or re-serration and chamfering of HSS and segment saw blades as well as solid carbide saws with ceramic grinding wheels and deep grinding with CBN or diamond grinding wheels. Accessories: Total enclosure, Sawblade magazine with 3 saw blade stacks each with a stack height of 250 mm (for approx. 35 saw blades each) #9007511, Device for automatic chamfering of sawblades from Ø 145 mm, Automatic threading of the grinding wheel, Automatic fire extinguishing system, Automatic central lubrication, Coolant system 400 L with coolant tank with filter system, Machine lamp, Oil collecting tray, Kodpfx Asw I Sk Njcconc 3 sawblade mandrels (loader). Saw diameter: 40-710mm Tooth pitch: 1 - 55mm Number of teeth: 2 - 998 Saw blade thickness: max. 8 mm Grinding wheel diameter: 200x32mm Connected load: 10kW (400V / 50Hz) mass: about 3200 kg Dimensions: L x W x H = 1198 x 1750 x 2015 mm colour: blue/grey RAL 7047 / blue RAL 250-50-20.

Year of construction: 1995, condition: excellent (used), 3 Sulzer MB 40-160/5 centrifugal pumps Flow rate: 32 m³/h Head: 147 m Kjded Sybpspfx Accsnc Maximum temperature: 130°C Seal: Mechanical seal with barrier fluid Drive power: Siemens 22 kW Speed: 2950 rpm ! Price per unit !

Condition: used, Tool grinding machine, twist drill grinding machine BORA -- BI-EMME s.n.c. (Italy) Type 1/BM 40 No. 49697 Year of manufacture 1997 Grinding range Ø 3 - 40 mm Center angle 40° - 180 Motor power 1.1 kW Grinding wheel dimension max. Ø 200 mm Knsdpfx Aenzt A Hjccoc Grinding wheel speed 2840 rpm Mains connection 400 Volt, 50 Hz - For grinding standard drills and other tools with 1, 2, 3, 4 or 6 cutting edges (step drills, taps, countersinks, drills with a thick core and drills with special grinding) - Precision six-jaw chuck Ø 125 m - pointing device (motor power 0.18 kW) - For left and right cutting drilling tools thanks to interchangeable cams - Cam disks easily interchangeable for 2 or multi-bladed tools - 4 cam disks - Centering arbor for MK1, MK2, MK3, MK4 - A white grinding wheel with a diameter of 170 mm and a width of 40 mm is installed - Metal base with door and shelf - Wet grinding unit shown opposite - Operating instructions per PDF Space requirement L x W x H 900 x 850 x 1250 mm Weight 220 kg Very good condition

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 550 mm, spindle bore: 77 mm, turning diameter over bed slide: 800 mm, GURUTZPE lathe model Super AT 400/6000, 6,000 mm between points, turning on bed 820 mm, on carriage 550 mm, shaft diameter 76,5 mm, 16 speeds from 9-500rpm, has fixed rear Steady , , has 4 independent claws chuck diameter 800mm, , very good condition in general Kodpfx Aswd D Iteccsnc

Condition: good (used), Centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump -Manufacturer: Siemens Hinsch, side channel pump type CEHF 3104 -Motor: AEG 22 kW / 2915 rpm -Dimensions: 1680/800/H990 mm Ksdpfshn S Slox Accsnc -Weight: 394 kg

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, ALZMETALL AX 4 / SV pillar drilling machine 3KW Manufacturer: Alzmetall Type: AX 4 / SV Condition: NEW Year of manufacture: 2025 Drilling capacity steel E335 (St 60) 55 mm Thread cutting Steel E335 (St 60) M 42 Cast EN-GJL-200 M 56 Short spindle MK 4 Spindle stroke 140 mm Usable projection 300 mm Column diameter 145 mm Machine table, usable support 615 x 430 mm Distance spindle-table min./max. 150/735 mm T-slots, number x width x distance 2 x 14 x 224 mm Feed 0.1 + 0.3 mm/rev Machine height approx. 1850 mm Net weight approx. 380 kg Drive stepless Motor 1500 rpm Power 3.0 kW Spindle speed rpm 70-2400 Standard equipment: Main switch with motor protection switch, lockable Mushroom push button (latching) for EMERGENCY STOP Speed adjustment stepless Speed display digital Feed overload protection Protection class IP 54 Spindle protection with electrical protection Paint: DD structural paint signal white RAL 9003, PANTONE 7545c, black Machine oil: initial filling; Container supplied loose Available options: - LED machine light Knodpfx Acey S Axgscjc - Thread cutting device with soft start (from 2025) - Coolant device in the base - Digital drilling depth display - Drilling depth fine adjustment 0.1 mm

Year of construction: 2013, operating hours: 1,300 h, condition: reconditioned (used), Skid similar, but not a Dynajet, Oertzen, Falch, DIBO, ... S500-30E-C - High-pressure pump: Falch xs31.1-30-500, 30 l/min at 500 bar (year of manufacture 01/08) - Motor: Electric, 30 kW - 1250 l water tank - Manometer - Pressure regulator - Safety valve - Steel frame, powder-coated - Covers made of aluminum - Forklift pockets and crane eyelets - Dimensions with 1250 l water tank: approx. 1,100 x 1,760 x 1,770 - Unladen weight: 1,085 kg Knodpfx Aceg Tm N Aecsc - Year of manufacture: 2013 - Operating hours: approx. 1500 h Condition: High-pressure pump overhauled in 06/2022. In very good used condition.