MIG/MAG welding machine 350 A

CLOOS GLC 350

Condition: excellent (used), Year of construction: 2004, Carl Cloos GLC 503 Quinto SD welding machine. A total of 4 units available. Year of manufacture: 2004-2004-1999. Price refers to 1 unit. Hodpfstkuk Rex Ai Njnk

Condition: new, New equipment MASS International NS3 Speciale Angled conveyor belt with separator Available at short notice Example as pictured: L-shaped conveyor with double roller separator Infeed section: 600 mm Inclined section: 1300 mm Usable width: 450 mm Outer width: 505 mm (without motor) Height-adjustable discharge height: 750 - 1050 mm Adjustable angles both in the infeed section and incline Black PU belt with cleats Cleat height: 20 mm Cleat spacing: 500 mm Belt speed: 3 m/min Mobile on steerable braked castors Side collection plates in the infeed section Optionally also available as angled conveyor with Supergrip belt and separator (see last two photos) Double roller separator with covered belt drive fitted with Super Grip Hsdpjd Tidxefx Ai Nonk Adjustable discharge chute

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm band speed 18 - 100 m/min table height 880 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,84 t Hsdpfsupw R Ajx Ai Nsnk dimensions of the machine ca. 1,85 x 1,9 x 2,0 m Demonstration system for a SPECIAL PRICE!! Fully automatic miter band saw • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start recognition) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm. Inclusive: - Micro-spray device - Leveling elements

Condition: excellent (used), Year of construction: 2019, operating hours: 403 h, functionality: fully functional, turning length: 1,200 mm, spindle bore: 120 mm, controller model: Siemens 840 Dsl, Equipment: documentation/manual, Technical data: Turning length 1200 mm Chuck diameter 350 mm Working stroke X top/bottom 200 mm Working stroke Y. axis 210 mm (+130/-80) Working stroke Z. axis 1200 mm Maximum travel speed W/X/Y/Z meters/minute 45/40/40/46 Ball screw diameter W/X/Y/Z mm 40/40/40/40 Profile rail guide, B/X/Y/Z mm 45/45/45/55 Tool flight circle 700 mm Maximum center distance 1200 mm Main spindle/counter spindle Spindle bearing diameter 120 mm/160 mm Spindle passage 65/105 mm Spindle bore diameter 80/120 mm Spindle flange/spindle head DIN 55026 A6 / A8 Drive power 100% ED 22 KW/67.4 Drive power, 40% ED 24 KW/80 Nominal speed 1400 rpm Maximum speed 5,700 rpm Torque 100% ED 150 nm/585 Torque 40% ED 191 nm/795 C-axis resolution 0.001 degrees Both turrets: Tool holder: VDI 40 Maximum speed rpm 6000 torque drive 12,000 speed drive Maximum drive power kW: 28.5 torque drive 23.5 speed drive Maximum torque (25% ED) Nm: 85 torque drive 56 speed drive Dimensions: Hnodpjvw Upcsfx Ai Nek 4500 x 2500 x 2500 Weight approx. 16000 kg Control: Siemens 840 Dsl

Condition: ready for operation (used), Year of construction: 1998, MIG-MAG welding system Hodpfxewx Hz Ee Ai Nonk Set welding current: 50 - 400 A Max. welding current at 45/60/100% duty cycle: 400/345/265 A Open circuit voltage: 16.5 - 45 V Standard wire feed for steel: 1.0 + 1.2 mm Wire feed speed: 1 - 20 m/min Electrical connection: 380 V Weight: 164 kg Space required: 950 x 550 x 850 mm

Condition: new, Year of construction: 2026, Yanigav RE800GIII Pile Driver • Weight: 1120 kg Hedpfxsr Ezhyo Ai Nenk • Dimensions (W x H): 2.00 x 2.60 m (transport) • Impact frequency: 670-1500 impacts per minute • Bell inner diameter: 150 mm • Pile length up to 3 m

Condition: good (used), Year of construction: 1998, machine/vehicle number: 0625004, Offer 24603 Technical data: - suitable for welding steel, aluminum, special metals, Cr Ni, etc. - welding current 450 A 60% ED - 360 A 100% ED - welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - water cooling device FRONIUS Hnsdpfxjvncqve Ai Nek - separate wire feed case - intermediate package device - wire feed case 10 linear meters - 4 rollers wire feed continuously adjustable - MIG - MAG hose package water-cooled approx. 4 linear meters - ground cable - pressure reducer - mobile base frame - connection 400 V / 6.6 A / 8.7 kVA - space requirement approx. W 650 x H 900 + 450 x D 1100 mm - weight approx. 200 kg

Condition: used, Year of construction: 1994, Technical details: welding current - continuous: 40...400 A Hnjdeu Nwx Uopfx Ai Njk Length: 900 mm height: 1200 mm total power requirement: 13,8 kVA weight of the machine approx.: ca. 180 kg space requirements of the machine approx.: B:0,6xL:0,9xH:1,2 m MIG MAG Welding device -welding transformator as spare part donor - capacity 40A/15V up to 400A/34V - open circuit voltage -58V - characteristic constant - protection type IP23 - isolation type F - water cooled Circuit board A5 missing! *

Condition: new, Year of construction: 2026, Yanigav Pendulum Post Driver HS3 / HSG3 • Weight: 510 kg / 575 kg • Drive: Tractor pump / self-propelled pump • Dimensions (L x W x H): 2.20 x 1.00 x 3.25 m • Maximum impact force thanks to 111 kg weight Hjdpfx Aior Ezmpe Njnk • Allows work to the left, right, and in line with the tractor's axle • Post length up to 2.5 m Price: €7,000 / €8,860 excl. 20% VAT

Condition: used, Cutter head, milling holder, carbide milling cutter, indexable insert milling cutter -Handover in the current condition as seen -Condition: see pictures (not complete) -Diameter: 325mm Hnjdpfx Asc Svm Usi Nsk -Inserts: Carbide -Intake: SK50 -Dimensions: 325/325/H210 -Weight: 28.8kg