Used Unimax 3 for sale (63,039)

Condition: new, Column Drilling Machine Rodpfxsxr Da As Aafjn Brand: MAXION Model: Unimax 3 Year of manufacture: 2002 – workshop tested Machine no.: 201835 Spindle speed (stepless): Range A 80 – 1,440 rpm Range B 180 – 3,200 rpm Normal drilling capacity: 30 mm Spindle taper: MK 3 Standard equipment includes: - Full motor protection - Reversing switch for right/left rotation - Digital speed display - Table adjustment via rack and pinion - Emergency stop button - Operating manual Used as seen, without warranty. The machine corresponds technically to the state of the art at the time of manufacture.

Condition: new, COLUMN DRILLING MACHINE UNIMAX 3 Comparable to Alzmetall, Flott, etc. Powerful, precise column drilling machine with a wide range of applications. Drill table adjustable via rack and pinion and worm gear, and swiveling around the column. Forward/reverse switch, emergency stop button, digital speed display Infinitely variable spindle speeds Range A: 80 - 1440 rpm Range B: 180 - 3200 rpm Continuous drilling capacity: 25 mm Nominal drilling capacity: 30 mm Thread cutting capacity: M20 Spindle: MK 3 Drilling depth: 125 mm Throat depth: 260 mm Spindle/table distance: 90 to 840 mm Table surface: 500 x 365 mm Overall height: 1855 mm Weight: 250 kg Incl. drilling package, consisting of: 1 drill chuck arbor MK3 / B16 2 reducing sleeves MK3 / 2, MK3 / 1 1 machine vice MSP 140 Rjdpfxjwkhlie Aafsn 1 keyless drill chuck 1 - 16 mm / B16

Condition: used, Column drilling machine IXION - MAXION type Unimax 3 serial no. 201516 year of construction 2009 Drilling capacity 30 mm Spindle holder MK 3 - short quill throat 260 mm Quill stroke 125 mm Table size 360 x 500 mm Column diameter 110 mm Rsdpfx Aajrz Tuwefsn Spindle speed 80 - 3200 rpm infinitely variable Motor power 0.8 / 1.5 kW Mains connection 400 Volt, 50 Hz - Spindle speed via 2 V-belt stages, 2 motor speeds and infinitely variable via variator drive - Motor speed level 1 for clockwise and counter-clockwise rotation, motor speed level 2 for clockwise rotation - Handwheel for quill fine feed - Drill table height adjustment via hand crank - RÖHM quick-action drill chuck Ø 1 - 16 mm - Emergency stop button Space requirement L x W x H 800 x 530 x 1800 mm Weight 230 kg Very good condition

Condition: new, Modern, precise production column drilling machine based on the proven UNIMAX 3 concept with stepless feed drive, automatic tool ejector, and standard chip breaker control. The digital display shows feed rate, speed, and drilling depth. Forward/reverse switch. Emergency stop button. Full motor protection. Preconfigured machine with optional thread cutting device, free-cutting function, and LED lamp. Standard drilling capacity in E 335: 30 mm Tapping capacity: M 20 Spindle: MT 3 Feed rate continuously adjustable in the range: 30 - 400 mm/min Programmable drilling depth: 125 mm Throat: 260 mm Distance spindle/table: 90 to 840 mm Table surface: 500 x 365 mm Column diameter: 110 mm Total height: 1,900 mm Weight: 280 kg Rsdpfxef Ey Aus Aafon Pole-changing motor: 0.8/1.5 kW Spindle speeds continuously adjustable Drilling range A: 80 - 1,440 rpm Drilling range B: 180 - 3,200 rpm Pre-configured machine including special equipment: - Thread cutting device - Free-cutting function - LED lamp

Condition: new, Spindle: MK 3 Continuous drilling capacity: 25 mm normal drilling capacity: 30 mm Tapping capacity: M 20 drilling depth: 125 mm throat depth: 260 mm Distance spindle/table: 90 to 840 mm table surface: 500 x 365 mm Rjdpfx Aaeb Eli Hefsn column diameter: 110 mm total height: 1.855 mm weight: 250 kg motor pole-changing: 0,8/1,5 kW Spindle speed infinitely variable range A: 80 - 1.440 min-1 range B: 180 - 3.200 min-1 Digital display for speed as standard.

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch Rjdpofg U Tpefx Aafsn - CE mark

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 feed range - spindle 0 mm/U Rjdpfx Asfg U Tnjafon spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 feed range - spindle 30 - 400 mm/U spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp Rsdpfopam Hrex Aafsn - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: good (used), Year of construction: 2000, Offer 25273 Technical specifications: - Drilling capacity in steel ST 60: 30 mm - Drill spindle mount: MT 3 - Drill spindle stroke: 125 mm - Infinitely variable spindle speeds: 80 - 3200 rpm Redpfx Ajw Hx Iasafen - Tapping capability, right/left rotation up to M20 - Throat depth: 260 mm - Max. distance table – spindle: 825 mm - Table with 2 T-slots: 500 × 360 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 0.8 / 1.5 kW - Required space approx.: W 500 × H 1900 × D 950 mm - Weight approx.: 230 kg

Condition: new, Column drilling machine Rjdpfx Ajb Hl Irsafen Make: MAXION Model: UNIMAX 3 Condition: New machine Spindle speed (infinitely variable): Range A 80 - 1.440 rpm range B 180 - 3.200 rpm normal drilling capacity: 30 mm standard equipped with: - Full motor protection - reversing switch right/left rotation - digital speed display - table adjustment via toothed rack - drill protection - emergency stop button - instruction manual

Condition: new, Column drilling machine Make: MAXION Model: UNIMAX 3 TAP Condition new machine Spindle speed (continuous): Area A-80 - 1,440 RPM. Area B 180-3,200 RPM. Standard ALB ear performance: 30 mm equipped as standard with: -infinitely variable speed control -Digital display for speed -Digital display for drilling depth Rsdpfx Ajd Hrhvjafen -Thread cutting device -Light machine -automatic tool ejector -Manual

Condition: new, Column drilling machine Make: MAXION Model: UNIMAX 3 AVG Condition: New machine Spindle speed (infinitely variable): Range A 80 - 1.440 rpm range B 180 - 3.200 rpm Rjdpfxebrfmke Aafjn normal drilling capacity: 30 mm standard equipped with: - infinitely variable drill feed - infinitely variable speed control - digital display for speed, feed and and drilling depth - automatic tool ejector - operating instructions with the following options: - Tapping device

Condition: new, MAXION UNIMAX 3 AV pillar drilling machine Redpfx Aogv I U Ssafsn Modern, precise production drilling machine based on the proven UNIMAX3 concept, with infinitely variable feed drive, automatic tool ejector and chip breaking control as standard, reversing switch right/left rotation. Feed rate, speed and drilling depth are shown in the display and the drilling depth is programmed. Technical data: Continuous drilling capacity in St 60 25 mm Drilling capacity normal 30 mm Tapping capacity M 20 spindle MK 3 drilling depth 125 mm throat 260 mm distance spindle/table 90 to 840 mm table surface 500 x 400 mm column diameter 110 mm total height 1.900 mm weight 280 kg motor power 0,8/1,5 kW Spindle speed infinitely variable range A 80-1.440 rpm Range B 180-3,200 rpm details see data sheet enclosed - please ask for further models

Condition: new, High performance threading machine with lead screw and optimal safety device against tool breakage. Program for single or continuous cycle. Electronically controlled motor braking for single cycle. Easy lead screw change by quick coupling. Technical data UNIMAX 3T GL: Threading capacity: M 4 - M20 Thread per hour: 800 Normal drilling capacity: 28 mm spindle: MK 3 thread depth: 90 mm drilling depth: 120 mm throat: 260 mm Redpfx Aasgv I Unefjn spindle / table: 220 - 600 mm table surface: 420 x 390 mm T-slot width: 14 mm column diameter: 110 mm total height: 1.300 mm weight: 250 kg special motor: 0,9 kW Mains connection: 400 V / 50 Hz 9 spindle speeds: 95 / 160 / 200 / 350 / 420 / 450 / 750 / 900 / 1,650 rpm Standard packing: C - 160x75x125 cm Other accessories / options: Lead screw, tap holder, outfeed switch, forced-ventilated motor, die holder, flange quill, foot pulse button, two-hand start, LED machine light, minimum quantity lubrication system, base cabinet.

Condition: used, Description: Kuka Robot KR 60-3 F industrial robot KRC 4 KCP 4 robot. Complete with cables and control panel. Rjdjyghp Sspfx Aafen

Condition: good (used), For sale: individual pieces of original deep hole drilling bits by Botek (Germany) – a renowned manufacturer of precision tools for metalworking. Single-lip drills (single-edge) with internal cooling, made from K15B carbide – very hard and wear-resistant. • Diameters from 3.0 mm to 10.2 mm • Working lengths from 150 mm to 480 mm • Internal cooling through the body • Material: K15B carbide (ultrafine grain) • For steel, stainless steel, aluminum, bronze, and engineering plastics The drills are designed for precise deep hole drilling with high dimensional stability. Applications include the aerospace, automotive, hydraulic industries, and toolmaking. Condition: New and used (pre-owned), but in good technical condition. Some items may require resharpening – an ideal base for professionals. Rsdpfjwg R I Eex Aafjn //// PRICE SHOWN IS PER PIECE ////

Condition: excellent (used), CATALOG NUMBER 7614 Technical data: - Inlet width: 550 mm - Inlet height: 220 mm - Shaft width: 630 mm - Knife length: 630 mm - Number of knives: 2 pcs - Sieve dimensions: 60x60 mm - 2 lower toothed feed shafts - Lower shaft motor approx. 1.5 kW - Upper toothed feed shaft - Upper shaft motor approx. 1.5 kW - Vibrating chute - Vibrating chute length: 4750 mm - Vibrating chute width: 450 mm - Main motor: 45 kW - Vibrating chute motor: 1.5 kW - Auto-reverse - Reverse mode - Overall machine dimensions L/W/H: 3200x1700x1400 mm - Overall machine dimensions L/W/H: 4750x800x1100 mm - Weight approx.: 4500 kg ADVANTAGES Redpfeydc R Sjx Aafen – Auto-reverse (adjustable) – Reverse mode – Used chipper, in very good condition Net price: 120,900 PLN Net price: 28,780 EUR (depending on the 4.2 EUR exchange rate) (Prices subject to change with significant exchange rate fluctuations)

Condition: new, carrying capacity per cantilever arm: 650 kg, shelf height: 4,000 mm, total length: 4,000 mm, total width: 1,480 mm, load capacity per stand: 1,950 kg, Specifications: - H: approx. 400 cm - D: approx. 148 cm - L: approx. 400 cm - Cantilever arms: approx. 120 cm including 8 cm front deflector - Axis dimension: 130 cm - NEW, immediately available from stock. - 650 kg load capacity per arm - 1950 kg load capacity per upright - Uprights in RAL 7016. - Cantilever arms in RAL 3000 - Arms are hooked in. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) Rodpoydm Hdofx Aafsn The uprights in this shelving set are prepared for possible conversion to double-sided use free of charge. For the advantages of a hooked cantilever arm, see illustrations. Shelf consists of: - 4 uprights, including base section approx. 400 cm, made of IPE180. - 12 cantilever arms, approx. 120 cm, made of 10 cm x 4 cm profile. - Includes all necessary fasteners and screws. Price: €1,995.00 net €2,374.05 gross You will receive an invoice with VAT. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is available upon request through our partner shipping company; costs depend on the zip code. Installation: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your needs... We are happy to assist you with the implementation of your projects, from planning and ordering to installation.

Condition: refurbished (used), Year of construction: 1996, Universal tool milling machine KUNZMANN WF 4/3 With 3 axes Heidenhain digital readout Year of construction: 1996 Travels: X 400 Y 320 Z 400 Speed range: 40 - 2550 rpm With the following accessories: Rigid angle table 800 mm x 360 mm clamping surface Mechanical handwheels for X , Y , Z axis Hydraulic tool clamping Automatic central lubrication pump for X , Y , Z axis Machine light 4-piece machine shoes Coolant device Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICE TRAINING !!! Redeq Ulucopfx Aafsn THE MACHINE IS IN GOOD CONDITION !!!

Condition: new, Year of construction: 2025, load capacity: 10,000 kg, Equipment: foot remote control, 3-axis welding positioner Protec KT 10 000 HV Complete set incl. hand and dual foot remote controls Digital speed display Hydraulic height adjustment Tilting range 0 to 130° Dimensions: Min. tilted height: 1050 mm Max. tilted height: 2200 mm Min. horizontal height: 1360 mm Clamping plate diameter: 2000 mm Length: 3250 mm, width: 1700 mm Rodpfjx Th Sujx Aafsn Speed from 0.05 to approx. 0.6 rpm (range from 0.05 to 1.2 rpm possible)

Condition: new, load capacity: 1,000 kg, Equipment: foot remote control, 1000 kg load capacity complete set incl. hand and double foot remote control (available from 600 kg to 10,000 kg) 3-axis weld positioner with adjustable height with through bore 200 mm table plate diameter 900 mm with T-slots, alternatively with screwed-on solid perforated plate 2000 x 1000 x 200 mm, thickness 20 mm, hole grid 100 mm, diameter 28 mm height (horizontal) min. 0.65 m, max. 1.25 m height (tilted) min. 0.45 m, max. 0.95 m speed from 0.01 - 1.1 rpm tilt up to 135° hand and double foot remote control with speed display very robust Redpfex Th A Hox Aafen price without accessories, accessories available at very competitive surcharge table plate surcharge €1,900 (only in combination with positioner)

Condition: new, Year of construction: 2025, overall weight: 3,000 kg, Column Lifting Rotating Device with 3-Ton Capacity Protec Syncrolift Rotating Device/Positioner Double Column, Wireless and Manual Remote Control Column Adjustment with Two Travel Modes Load Capacity 3000 kg, 360° Minimum Working Height: 600 mm Maximum Working Height 1500 mm Speed 0.5 rpm Clamping Plate Diameter 600 mm Rotation 0.75 kW Rjdox Thq Rspfx Aafen Torque 5180 N-m 2 to 10-Ton Capacity Available Upon Request

Condition: excellent (used), CATALOG NUMBER: 7404 Rjdjx Tgv Sepfx Aafjn TECHNICAL DATA - Minimum workpiece thickness: 16mm - Maximum workpiece thickness: 60mm - Height to table surface: 920mm - Motor power: 1.2kW - Voltage: 400V - Disc – guillotine – feed rollers for tape – glue tank – 3 guide rollers (first one is the drive roller) - Worktable: 1600x670mm - Dimensions (L/W/H): 1600x1400x1100mm - Weight: 170kg ADVANTAGES – Polish manufacture – Suitable for edging both straight and curved edges – Used machine, in very good condition Net price: 5,900 PLN Net price: 1,400 EUR (based on 4.2 PLN/EUR exchange rate) (Prices may change with significant fluctuations)

Condition: new, Year of construction: 2025, load capacity: 10,000 kg, pivoting range: 135 °, Equipment: foot remote control, 3-axis welding positioner Protec KT 10 000 HV Complete set incl. hand and dual foot remote controls Digital speed display Hydraulic height adjustment Tilting range 0 to 130° Rodjxt Tgnjpfx Aafjn Dimensions: Min. tilted height: 1050 mm Max. tilted height: 2200 mm Min. horizontal height: 1360 mm Clamping plate diameter: 2000 mm Length: 3250 mm, width: 1700 mm Speed from 0.05 to approx. 0.6 rpm (range from 0.05 to 1.2 rpm possible)

Condition: used, mileage: 1 km, Year of construction: 2008, Year of manufacture 2008 Length 5.60m Steel Redpfx Aaovwz Swefjn Was on Iveco 8x4 Complete with stamp and subframe Frame width at the rear 79cm and at the front 86cm