Laser Cutting Machine

BODOR P4 12kW

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Ksdpfxoflk Awo Ah Nell Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: used, Year of construction: 2023, load capacity: 5,000 kg, lifting height: 3,770 mm, total length: 5,930 mm, Diesel forklift Linde H 50D-01/600 Drive Diesel Year built 2023 Kjdpfx Ahoxd El Ro Nsll Lifting height (mm) 3,770 Lifting weight (kg) 5,000

Year of construction: 2021, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER and LOADING/UNLOADING SYSTEM X-AXIS TRAVEL: 4064 mm Y-AXIS TRAVEL: 2032 mm Kedpfowwxuzjx Ah Noll Z-AXIS TRAVEL: 70 mm WORKING AREA: 4000 x 2000 mm ADMITTED LOAD ON TABLE: 1270 Kg SOURCE: FIBER 6000 ; 6000 W CONTROL UNIT: ByVISION ACCESSORIES: PORTABLE HANDWHEEL ; FUME EXHAUSTER NOTE: WITH SYSTEM ANTIL SPA 4020 yom 2021

Condition: excellent (used), Year of construction: 2012, travel distance X-axis: 2,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 40,000 m/min, rapid traverse Y-axis: 40,000 m/min, rapid traverse Z-axis: 40,000 m/min, table width: 750 mm, table length: 2,900 mm, table load: 2,150 kg, X - Travel: 2600mm Y - Travel: 700mm Z - Travel: 700mm A - Axis: 360000° B - Axis: - 110 to + 110° Kodpexuqv Asfx Ah Nsll Table Length: 2900mm Table Width: 750mm Table load: 2150 Table Ø: 750mm Feed rate X-Axis: 40000mm/min. Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 35kW Speeds / ranges: 18000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 8400mm Width: 3423mm Height: 2620mm Weight: 16000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2017, SIEMENS 840D SL control Working travels 550 x 320 x 420 mm Kledpswwundofx Ah Nol Milling head swivellling +100 / -10 ° Spindle taper HSK A50 Spindle speeds -12'000 rpm Tool changer with 64 Pos. Turning spindle 4'500 rpm NC swivel rotary table with B- + C-axis Tool breakage control system Tool lenght measuring device 3D-measuring tracer Misc. accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2009, operating hours: 4,500 h, I have 5 Kaeser HB 950 blowers for sale with 110 kW and 132 kW motors. Kodpfx Ahev Rmkxo Noll

Condition: good (used), Year of construction: 2009, feed length X-axis: 6,000 mm, feed length Y-axis: 3,000 mm, feed length Z-axis: 1,500 mm, controller model: HAIDENNAIN, workpiece length (max.): 6,000 mm, workpiece width (max.): 2,500 mm, table width: 6,000 mm, table length: 2,500 mm, Portal milling machine with 5-axis head Kljdpfxevcqybo Ah Nol

Condition: used, Year of construction: 2007, reus 8000 min-1 U/min Weight 5500 kg Kljdpfx Ahowm Rqas Njl Year 2007 Control Siemens 840D Dimensions (L/W/H) 3600 x 2800 x 2400 mm travel -x axis 1035 mm travel -y axis 560 mm travel -z axis 510 mm

Condition: good (used), Year of construction: 2007, functionality: fully functional, Weiler C30 x 750 precision lathe (2007) Manufacturer: Weiler Type: C30 x 750 Year of manufacture: 2007 Availability: several machines available Condition: very good, used, from training workshop, last maintenance 09/2024 Center width 750mm Circulation diameter over bed 330mm Rotation diameter facing slide 160mm Movement of facing slide 180mm Bed width 240mm Turning tool cross-section 20 x 20mm Spindle head according to DIN 55027 size 5 Spindle diameter in front bearing 70mm Spindle bore 40.5mm Inner taper of the main spindle 5mm Drive power 60 %/100 % ED 9/7KW Total speed range 1 - 4,500 rpm Feed force longitudinal 6,000N Planar feed force 3,000N Feed range 0.001 - 10 mm/rev Rapid traverse speed longitudinal/plane 6/3 m/min Metric threads 0.1 - 400mm Inch thread 56 - 1/4 G/inch Module thread 0.125 - 28mm DP thread 224 - 1 Dp Max. Threads 99 Quill diameter 50mm Quill stroke 130mm Inner taper of quill MK3 Length 1750mm Width 1350mm height 1670mm Weight 1300kg Scope of delivery Kodpfxoxd Tiwo Ah Nsll Rota S Plus 200-52 jaw chuck Multifix Machine light Coolant system Machine feet Original documentation Weiler maintenance log 09/2024

Year of construction: 2023, operating hours: 0 h, condition: new, MG20B is suitable for bending your steel into the desired shape. Product information: - Voltage: 380 V (optional with 220 V available) - Motor Power: 1,5 kW - Dimensions Machine: 60cm x 45cm x 32cm - Dimensions Machine frame: 57cm x 44cm x 60cm - Ideal for your construction company or also for your construction sites Kjdom Sgx Dspfx Ah Noll - Easy to carry - In addition to the individual bending process, a bending sequence can also be programmed - Stirrup head for different reinforcing steel Ø are included in the accessories (incl. accessories, see pictures) - Possible in automatic or manual mode - Bending capacities depending on steel strength according to table (see pictures) - Optional available with digital control panel - Net weight: 95 kg Shipping: Europe-wide (self-collection also possible) If you have any questions, please do not hesitate to contact us!