Tenoning machine

BERRONE OVER TEN 140

Condition: excellent (used), mileage: 495,000 km, power: 537 kW (730.12 HP), fuel type: diesel, tire size: 385/65 R 22.5, axle configuration: 8x4, fuel: diesel, fuel tank capacity: 1,000 l, brakes: retarder, color: blue, driver cabin: sleeper cab, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 13,000 kg, Equipment: AdBlue, air conditioning, cruise control, retarder, second fuel tank, spoiler, = Additional Options and Accessories = - Leaf spring suspension - Roof spoiler Nledpfjuu Ha Djx Ag Ijh - Refrigerator - Air suspension - Radio/CD player - Sleeper cab - Sun visor - Power take-off (PTO) = Notes = Color: Blue Details Manufacturer: Scania Type: R 730 8x4 Chassis number: YS2R8X40005472379 Year: 2017 Mileage: approx. 495,000 km Engine: 730 HP / EURO 6 / 16-liter diesel / V8 Transmission: Scania Retarder R4100 Front axle: 8,000 kg | 385/65 R 22.5 | leaf suspension Second axle: 8,400 kg | 385/65 R 22.5 | air suspension Rear axles: 13,000 kg | 315/80 R 22.5 | air suspension | hub reduction GVW: 26,000 kg GCW: 160,000 kg Equipment 500L + 500L fuel tanks AdBlue NATO / 24-volt electrical system Warning flashing lights on roof Alcoa rims Tool box PTO with 170L tank JOST JSK38C 3.5" fifth wheel on sliding frame Webasto Cabin Multi-functional steering wheel Cruise control Sun visor 2 x Bed Refrigerator Comfortable seats Storage boxes Radio CD player / AUX / USB Tachograph Roof hatch = Further Information = General Information Year of construction: 2017 Year of manufacture: 2017 Technical Information Number of cylinders: 8 Engine displacement: 16,000 cc Payload: 160,000 kg Permissible total weight: 42,000 kg Transmission Transmission: Scania Retarder R4100 Axle Configuration Front axle: Tire size: 385/65 R 22.5; Alloy rims; Max. axle load: 8,000 kg; Steerable; Suspension: Leaf spring suspension Mid-axle: Tire size: 385/65 R 22.5; Alloy rims; Lift axle; Max. axle load: 8,000 kg; Suspension: Air suspension Rear axle 1: Tire size: 315/80 R 22.5; Twin tires; Alloy rims; Max. axle load: 13,000 kg; Reduction: External planetary axles; Suspension: Air suspension Rear axle 2: Tire size: 315/80 R 22.5; Twin tires; Alloy rims; Max. axle load: 13,000 kg; Reduction: External planetary axles; Suspension: Air suspension Functional Body manufacturer: Scania Condition Technical condition: very good Optical condition: very good Damage: none Financial Information Price: On request

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine -Spindle adjustment: height and angle -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed apparatus Holz-Her 3 rolls -Useful shaft length: 100 mm -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm Nljdoh Nvyzepfx Ag Ijh -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg

Condition: new, Year of construction: 2025, CASADEI PFS 520 - Planer-thicknesser machine with 520 mm planing width and motorized thickness table adjustment Stable steel cast iron construction Large, ribbed planer tables made of cast iron, annealed to prevent warping Smooth operation due to high self-weight Four feed speeds Motorized thickness table adjustment with two speeds and digital display Segmented pressure shoes in the infeed 4-knife cutterhead, precision-mounted Helically toothed steel feed roller for particularly even and gentle wood feed Take-off roller with rubber coating Large planer fence, adjustable 90°-45°, readable from the front Standard with auxiliary fence Powerful S6 industrial motor (P2) Tersa cutterhead Knife changes in seconds When the machine starts, the knives are automatically tensioned by centrifugal force - self-clamping The knife overhang adjusts automatically without adjustment or screwing The planer table is adjusted by a stable and precisely guided parallelogram system, ensuring that the distance between the table tips and the cutterhead remains the same in every adjustment position. The stable aluminum planer fence is anodized as standard, easily adjustable, and offers a generous support surface. The adjustable inclination from 90° to 45° is easily readable from the workstation. Standard with an auxiliary fence for safe planing, even of narrow workpieces. Fig. with optional equipment The connection point for the dust extraction is always in the same position, both for planing and thicknessing. This eliminates the need for additional dust extraction hoses or cumbersome repositioning and routing around the machine. Technical data Total length of planer tables 2300 mm Infeed table length 1180 mm Nljdpjbxz S Hsfx Ag Ieh Planing width 520 mm Dimensions of planer fence 1200 x 190 mm Swivel range of planer fence 90 - 45° Min./Max. planing height 3/250 mm Cutterhead diameter / number of knives 100 mm / 4 pcs. Feed speed 5/8/12/18 m/min. Speed 5000 rpm Motor power 400 V / 50 Hz / S6 Dust extraction port diameter 120 mm Weight 1020 kg Top machine Location: Bitburg - available immediately

Condition: used, Swiveling aggregate, chain width 10 mm Storage location: Nattheim Nsdpfx Agevvku Eo Ijlh

Condition: new, Type V-380 Number of wheels(pcs)-3 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Nledpfxjdg Ucuo Ag Ish Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse

Condition: good (used), Year of construction: 2000, Schroeder Mosaic Press 160mm. Gluing patterns - brick / English pattern plate 640x274mm and halves 640x137mm glued in 6 variants: - single brick offset 50% - double brick offset 50 % - triple brick offset 50 % - single brick offset 25 % - double brick offset 25 % Njdper Iyvbsfx Ag Ielh - triple brick offset 25 %

Year of construction: 2014, condition: ready for operation (used), A mobile extraction and filter unit Höcker is available. Filter class: H3, motor power: 4kW, suction connection: 200mm, filter surface area: approx. 12m², max. volume flow: 3400m³/h, max. negative pressure: 2700Pa, collection container volume: 350l, machine dimensions X/Y/Z: approx. 2000mm/1100mm/2000mm, weight: approx. 420kg. On site inspection is possible. Nljdpfx Aoyg Nu Nsg Ioh

Condition: ready for operation (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure 4. Spindle, right 8.3 kW (motor replaced) ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Nljdsxz Hh Ujpfx Ag Ioh Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Safety and noise reduction ----- Full safety enclosure Easily hinged safety hood with window. Covers the ent...

Condition: new, Year of construction: 2026, functionality: fully functional, tank capacity: 50,000 l, Heating oil tank – storage tank – diesel tank – tank system – steel tank brand new – with a capacity of 50,000 liters – according to EN 12285-2 – Class B – (replacement for DIN 6616), above ground, double-walled, including test certificate, suitable for installation in areas of seismic zone 0. The tank has two saddle supports, a manhole with a dome cover, and is equipped with the following fittings: 1 filling pipe with a TW closure (filling cap) and dip tube, 1 gauging pipe with a gauging rod and gauging rod closure, 1 vent pipe with a vent cap, 1 brand new limit switch with type approval (AIII), Njdpfx Aei A Hz Aog Ielh 1 ladder and 1 spare socket for withdrawal purposes, 1 optical leak detection device with type approval and leak detection fluid. The tank will be sandblasted, primed, and painted white externally / RAL 9016 color (sample photo). (Other RAL colors are also available on request!) L = approx. 10.70 m – D = 2.50 m – Weight approx. 9.5 tons – ex works, loaded free of charge – General: You will receive an invoice with VAT shown. The purchase is subject to our general terms and conditions. Other tank systems (new and used) as well as rental systems are also available! In addition, we purchase existing tank systems and can, with certified specialist company qualifications in accordance with the German Water Resources Act (§ 62 WHG), professionally empty, clean, dismantle, and transport them away.

Condition: used, total length: 2,680 mm, total width: 1,200 mm, total height: 2,200 mm, Year of manufacture: 2001 Colour: Grey Empty weight: 950 kg Price: On request Table milling machine Hofmann TFS 1200 Serial no. 127-01204 Year of construction 2001 7.8kW, 16amp, 400V 45 degree tilt adjustable. Aigner guide Feeder - Year: 2001 - Serial number: 127-01204 - Main motor power [kW]: 7.8 - Spindle diameter [mm]: 40 - Table length [mm]: 2680 - Table width [mm]: 450 - Tiltable spindle: Automatic Nledpfjwl I E Eox Ag Ish - └ Min. tiltability [°]: 0 - └ Max. tiltability [°]: 45 - Feeding device present: Yes - Brand: Masterwood - Type: Euromeo - Number of wheels [pcs]: 4 - Number of speeds: 2 - Guide present: Yes - Brand: Aigner - Min. spindle speed [rpm]: 3000 - Spindle speed control: Incremental - Transport dimensions: 2680mm x 1200mm x 2200mm (l x w x h) - Transport weight [kg]: 950kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels