Spindle moulders Hofmann TFS 1200 2001

Hofmann TFS 1200

Condition: used, Year of construction: 1999, Table milling machine Hofmann TFS 1200 380V Isdpfxjwng I Re Adnea Spindle Degrees + 45 to - 10 Diameter 40mm Main motor 5kW Feeder Masterwood MEC 4R 4 feed rollers conductor Aigner - Year: 1999 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2006, Manufacturer: Weinig Model: Unimat Super 4 Year of manufacture: 2006 Four side planer Manufacturer: WEINIG restored Model: UNIMAT SUPER 4 with mechanization of short workpieces EM15 - Year of manufacture: 2006 Technical specifications - Working width: max 150 mm - Working width: min 25 mm - Working height: max 50 mm - Working height: min 15 mm - Number of spindles: 3 - Power top spindle: 22 kW - Power bottom spindle: 11 kW - Spindle rotation speed: max 1/min 7.000 rpm - Spindle diamete: 40 mm - Table length: 2.000 mm - Feedrate max: 24 m/min - Continuously variable feed - Seperate motor per spindle - Roller infeed Cardanic drive - Infeed from magazine Isdpfx Aoqprk Todnoa - Motoric adjustment Planing height - Lubrication pump automatic - WEINIG Face-milling cutter - WEINIG EM 15 - Total connection: 45 kW

Year of construction: 2004, condition: excellent (used), HOFMANN swivel spindle milling machine TFS 1200 Year of manufacture 2004 S/N 127-01323 manufacturer: Hofmann Bad Windsheim from a training company very good condition manual height and swivel adjustment for fine tuning Iodpfxom Tg Ece Adnsa analog display for height adjustment, height adjustment 125mm table size 1200 x 820mm and table extension 200 x 820mm swivel range -5° to + 45 spindle speed 3000/4000/5000/6000/8000/10000 rpm. milling spindle D=30mm milling arbor MK5 motor 4,7 Kw / 6,3 PS Suction nozzle D=120 mm Lateral roller table with eccentric hold-down and adjustable angle stop Height adjustable with hand wheel CE mark Weight 1300 Kg

Condition: used, Year of construction: 2008, Bioflamm SR-EB9 wood chip boiler, moving grate furnace, year of manufacture 2008, a new heat exchanger was installed in 2018, output 830 kW, hot water system max. temperature 120°C, incl. feed auger with backfire protection, incl. fuel chain conveyor, incl. 2 pcs push floor containers of 30m³ each, incl. automatic ash removal, incl. hydraulic unit, incl. control system, dismantling must be carried out by the buyer. Iodpfxovytfuj Adnea

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Machine is completely workshop overhauled! Automatic horizontal and vertical positioning for absolute and incremental dimensions Digital readout for horizontal cuts PLC control with a 2-line display and plain-text error diagnosis for operation mode and fault diagnosis Infinitely variable feed speed up to 24 m/min Automatic workpiece end detection Calculator function integrated in the control panel (calculation of workpiece dimensions) Cutting length: 4300 mm Cutting height: 2200 mm Max. trimming height: 2100 mm Max. scoring height, vertical: 2100 mm Max. cutting depth: 80 mm Motor: 5.5 kW Saw blade speed: 4,500 rpm Saw blade diameter: 300 mm Air requirement: 1,200 m³/h Air velocity: 20 m/s Static negative pressure: 1,200 Pa Extraction connection: 2 x 120 mm Dimensions (L x W x H): 5,620 (plus extraction nozzle) x 1,480 x 2,948 mm Room height: 2,990 mm Compressed air connection: 6 bar Air consumption: 50 NL/min Electrical connection load: 5.7 kW With Supercut pre-scoring unit With pneumatically swiveling saw unit With longitudinal stop for lower workpiece support Isdpfxsw Nac Aj Adnea With short folding rail, complete Availability: by arrangement Location: Flörsheim

Condition: as good as new (ex-display), Year of construction: 2018, Spindle tiltable: Yes -45 to 45° Height adjustment: Handwheel Iodpegyzzmofx Adnea Pivot adjustment: Handwheel Stop adjustment: manual Height display: mech. counter display Swivel angle display: mech. counter display Milling stop display: mechanical counter display spindle diameter: 30 mm spindle speeds: 3000, 4500, 6000, 8000, 10000 rpm power input: 7 kW Motor brake: Yes, automatic Suction connection: 1 x 120mm, 2 x 80mm Machine length: 2500mm Machine width: 1250mm Weight: 510kg

Condition: reconditioned (used), Year of construction: 1995, Motor power: 8.6 kW Voltage: 400 V 50 Hz Spindle: 30 + 40 mm Sliding table: yes Circular milling: yes Isdov Npqrjpfx Adnsa Brake and emergency stop Speeds: 3000, 4000, 6000, 8000, 5000, 10000 rpm

Condition: ready for operation (used), Year of construction: 2018, General Data Machine weight 600 KG Additional Equipment Glue Pot Capacity: Max glue pot capacity 1 Kg (with optional 2 Kg glue pot) Gluing Unit:Edge gluing on open and closed curved panels of small and large dimensions/1 gluing roller/2 rollers to copy the shape of the panel/2 800 W resistors with electronic temperature control/Manual adjustment of the glue quantity/Glue temperature adjustment/Automatic edge cutting system PLC System: For setting the measurement and cutting of the edge with encoder reading Laser: Facilitates cutting programming for closed pieces without the need to measure the piece Piece Feeder: On/Off automatic piece feeder Work Surface: For edging and trimming small pieces Edge Magazine: Rolled edge magazine with idle roller system Iodpfx Adjv H E S Tonsa Trimming Group: 2 high frequency 0.5 kW motors with rotation speed of 15000 rpm /On/Off trimming unit/Pneumatic lifting of the two motors/2 brazed cutters R=3 Z=6/ Articulated Arm: Complete with workpiece depression table for edging and trimming large pieces This VITAP Eclipse edgebander was manufactured in 2018. Ideal for precise edge finishing, it ensures consistent performance for woodworking projects. Consider the opportunity to buy this VITAP Eclipse edgebander. Contact us for more information. Application Types Edge Banding

Condition: excellent (used), Year of construction: 2012, Set for finger jointing in medium and mass production. The machine is technically efficient and in good condition. Several sets of tools are included. Characteristic: – industrial set with one tenoning machine. Loading the package under the supervision of the operator enables the processing of inferior raw material, – sensitivity controlled by microprocessors /automatic control/, – turning the package after 1 treatment on the turntable (sharp connection) or turning the package on the back (furniture joint with a line; unique GOMA solution), – the set includes an automatic station for loading the press, – the possibility of using cuts on the press, Tenoner with feed table Data Values Milling spindle fi 50x210 mm Spindle speed 6000 rpm Ijdpjlu D Tfefx Adnoa 18.5 kW motor Tool dimensions fi 250x160 mm The saw spindle aligns the face Special chipper fi 300x8 mm 6 kW / 3000 rpm motor Stepless feed table Working width x working height 600 x 30-160 mm Glue nozzle outline by tool PRESS FC-10 PZ6/2 Data Values Board width 30-160 mm Jufefe Board thickness 20-70 mm The length of the finished board is 6000 mm Pressing force 3 - 7.5 - 10 T Hydraulic power pack 3 kW / 140 bar

Condition: used, Year of construction: 2012, total width: 1,750 mm, total length: 1,800 mm, total height: 1,600 mm, Weight: 1.900 kg Price: On request - Year: 2012 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 12236 - Arbor hole saw blade diameter [mm]: 650 - Conveyor motor power [kW]: 0.8 - Conveyor width [mm]: 350 - Voltage [V]: 400 - Current consumption [A]: 80 - Fuse [A]: 100 - Power [kW]: 57.0 - Transport dimensions: 1800mm x 1750mm x 1600mm (l x w x h) - Transport weight [kg]: 1900kg Iedpfewniidex Adnsa - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels