HAIMER UNO 20|40

HAIMER UNO 20|40

Condition: good (used), Year of construction: 2011, Ref. -No.: 10489 Manufacturer: DMG Type: DMC 60 U duoBLOCK Year of construction: 2011 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840D Storage location: Halberstadt Country of origin: Germany Machine-No.: 11XX000XX01XX Major overhaul: 2025 X-Travel: 600 mm Y-Travel: 700 mm Z-Travel: 600 mm B-Axis: -30 - 180 ° C-Axis: 0,00 ° Spindle Taper: HSK A63 DIN 69893 Max. Workpiece Weight: 600 kg Max. rotary table diameter: 630 O Table speed range: 40 min/-1 Tool Piece Magazine With: 60 Pcs./pcs. Turning Speed Range - Stepless: 20 - 18.000 RPM Max. Torque: 121 / 82 Nm Feed force (X / Y / Z): 10 kN Rapid Travel X/Y/Z: 60.000 mm / min Drive Capacity - Spindle Motor: 28 / 19 kW acceleration: 6 m/s² Total Power Requirement: 55 kW Weight Of The Machine Ca.: 12 t Dimensions Of The Machine Ca.: 7,0 x 5,0 x 3,2 m Numbers Of Pallets: 2 Size Of Pallet: 630 x 630 mm Tool change time: 3,7 s Further information: DMG DMC 60 U – 5-Axis Universal Machining Center (Year 2011) Pjdpfx Aaeycpxgshopu The machine is currently still in production and has been used exclusively for aluminum machining in single-shift operation. It is equipped with a pallet changer and a high-pressure cooling system (30 bar). In 2024, extensive maintenance and refurbishment work was carried out: ✅ All axes (except the Z-axis) were renewed ✅ Guideways were replaced ✅ Spindle was overhauled Maintenance and service reports, as well as all relevant documentation, are fully available. More technical Specifications: 🔹 Working ranges: Distance spindle center – table (horizontal): 20 – 620 mm Distance spindle center – table (vertical): 120 – 720 mm Distance spindle nose – table (horizontal): -150 – 550 mm Distance spindle nose – table (vertical): -250 – 450 mm Features & Accessories ✅ Complete documentation available ✅ Chip conveyor for efficient chip removal ✅ Cooling system with high-pressure cooling (30 bar) ✅ Internal coolant supply for optimal machining ✅ Pallet changer for uninterrupted operation ✅ Rotating sight glass for clear process visibility ✅ Renishaw OMP 60 probe for precise workpiece measurement ✅ Electronic handwheel for easy manual control ✅ Oil mist extraction for a clean working environment ✅ Paper band filter for effective coolant filtration ✅ Spindle oil cooler for temperature stabilization The machine can be inspected and tested under production conditions by appointment. 📍 Availability: Upon agreement

Year of construction: 1998, condition: like new (used), 65 Watt YAG laser Ppodpfx Ajd Dhw Njahou

Year of construction: 1993, condition: used, TYPE: DEA 400/2000 Year: n.d. MAXIMUM RAM CAPACITY: 400 tons Pjdpfxoihf R Uj Aahjpu SLIDE STROKE: 1,100 mm MAXIMUM SHUT HEIGHT: 1,600 mm TABLE DIMENSIONS: 2,000 x 1,600 mm FAST STROKE: 650 mm/sec CUSHION CAPACITY: 160 tons CUSHION STROKE: 400 mm HEIGHT ABOVE GROUND: 5,800 mm DISTANCE BETWEEN UPRIGHTS: 3,400 mm LATERAL WINDOW: 1,600 mm

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,800 mm, measuring range Z-axis: 1,000 mm, ZEISS ACCURA measuring machine 12/10/10 automatic Measuring range: 1200x1800x1000 Head: ZEISS RDS CAA Sensor: ZEISS VAST XXT - TL3 Probe changer: 3 stations Controller: ZEISS C99 Software: Calypso 2011 Year of manufacture: 2011 Pedpfx Asxq R R Eeahspu Warranty: to be agreed Description: machine in perfect working order and excellent cosmetic condition

Condition: excellent (used), Year of construction: 2016, operating hours: 200 h, functionality: fully functional, total height: 1,760 mm, total length: 1,100 mm, total width: 850 mm, workpiece weight (max.): 12 kg, spindle speed (max.): 10,000 rpm, spindle speed (min.): 500 rpm, feed length X-axis: 100 mm, feed length Y-axis: 190 mm, feed length Z-axis: 325 mm, type of input current: three-phase, grinding wheel diameter: 125 mm, overall weight: 520 kg, grinding length: 270 mm, rotational speed (min.): 500 rpm, rotational speed (max.): 10,000 rpm, center height in crank: 220 mm, center height: 300 mm, collet bore: 25 mm, grinding spindle speed: 10,000 rpm, feed rate X-axis: 1 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, pivoting range: 360 °, travel distance X-axis: 100 mm, travel distance Y-axis: 190 mm, travel distance Z-axis: 325 mm, center width: 620 mm, grinding spindle motor power: 1,100 W, table length: 190 mm, table width: 200 mm, table height: 1,020 mm, power: 1.1 kW (1.50 HP), height adjustment type: electric, workpiece diameter (max.): 400 mm, input current: 20 A, grinding diameter: 300 mm, input frequency: 50 Hz, disc diameter: 125 mm, input voltage: 280 V, space requirement width: 2,000 mm, space requirement length: 1,800 mm, space requirement height: 1,800 mm, grinding wheel speed: 10,000 rpm, year of last overhaul: 2022, distance table to spindle center: 325 mm, tool diameter: 300 mm, workpiece length between centers: 270 mm, distance between centers: 270 mm, number of spindles: 1, Equipment: rotational speed infinitely variable, max. grinding diameter 238 - 620 mm grinding length 190 mm workpiece length 380 - 940 mm spindle turning speed - stepless 2 - 12000 U/min current capacity 380 kVA power capacity - grinding motor 1,1 kW total power requirement 2,2 kW weight of the machine ca. 0,6 t !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! 2016 S25 003004 V, 50/60 Hz, with CEE plug and cable Color: light gray motorized height adjustment, axial grinding spindle adjustment Equipment: * Opto-electronic measuring device with measuring electronics Image processing, PC (Original ISOG) * CCD camera and monitor * Dividing head Sk 40 with dividing disk 24 R * 1 dividing disk each 14, 16, 18 * Tightening screw M 16 * Counter bearing complete with 4 center punch points * Center point Sk 40 with driver * Twist-u. Relief grinding device with rack housing * Dust extraction completely without vacuum cleaner * LED machine light * Tooth support complete with support and sliding blades * Setting gauge * Universal setting gauge * Handwheel facility * Dressing device with 3 diamonds * 1 set of collets 1.0 - 17.5 mm by 0.5 mm rising * Pliers sleeve and extraction nut and key * 10 pieces of direct collets Sk 40 6 - 25 mm Pedpfx Ajw U Ehbeahjpu * 4 cone reducing sleeves Sk 40 x Mk 1, 2, 3, 4 * Clamping nut * 12 grinding wheel chucks * Tool cabinet with shelves * 2 protective hoods * various diamond / borazon discs * Operating instructions and key, spare parts list, circuit diagram * Set of technical grinding instructions ##### Machine is partially overhauled and has an electrical acceptance report!#####

Condition: ready for operation (used), There are two identical machines available, including documentation. Pjdpjm Rg R Asfx Aahepu

Condition: excellent (used), Year of construction: 2009, x-travel 500 mm y-travel 450 mm z-travel 400 mm control Siemens 840 D tool adaptor SK 40 spindle turning speed - stepless 2 U/min feed speeds mm/min tool change unit 16 surface area 700 x 500 mm workpiece weight max. 500 kg weight of the machine ca. 4,4 t Overall size 2,8 x 2,6 x 2,5 mm Ppodjzawmajpfx Aaheu Full coverhing/ housing cooling device, handwheel only about 1.500 h

Condition: like new (used), Year of construction: 2000, operating hours: 33,831 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, controller model: '3D contouring control Millplus, workpiece weight (max.): 1,000 kg, total length: 7,000 mm, total width: 3,500 mm, overall weight: 3,902 kg, spindle speed (min.): 18,000 rpm, spindle motor power: 15,000 W, Year of construction: 2000 CNC controller: '3D contouring control Millplus Axes X-axis travel mm: 1250 Y-axis travel mm: 880 Z-axis travel mm: 800 C-axis degrees: 360º (0,001) Feed rates m/min: 40 Rapid traverse m/min: 40 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø1000 Max. workpiece weight kg: 1000 Pedpfx Aajxvrbiohopu max. torque Nm: 7900 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 15/10 (40%ED/cont) Cooling Tank capacity: 600 Tool system Tool holder: CAT 40 Tool magazine slots: 60 Tool changer: Doeble gripper Equipment Electronic Handwheel Chip conveyor Internal cooling lubricant supply Rotating inspection windows Rinsing gun Preapared for RENISHAW sonde Accuracy package Ready for internal cooling (40/80 bar) Paper band filter Machine running times Under power: 33831 Spindle Working: 6328 Rated power kVA: 55 Basic machine dimensions / weight Length mm: 7000 Width mm: 3500 Height mm: 3902

Condition: used, Year of construction: 2006, Solid drill diameter / mm bore depth / mm number of spindles / 2-machine package: Froriep deep hole drilling machine & Irle finishing machine Perfectly matched duo for deep hole drilling and precise finishing of large workpieces A specialised machine package is available for sale – two perfectly matched systems for the complete machining of long, heavy workpieces with the highest demands on precision and efficiency. MACHINE 1 Froriep CNC deep hole drilling machine – the prefabrication specialist Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Swing diameter over bed: 1,000 mm Clamping diameter faceplate: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steering ring Ppsdpfxsuddimo Aaheu MACHINE 2 Irle machine – high-precision finishing Power: 129 kW Control: Siemens NC control Speed range: 2 – 300 rpm (stepless) Feed: 3 – 4,500 mm/min (in steps) Centre distance: 11,000 mm Swing diameter over bed: 1,250 mm Clamping range of steady rests: 150 – 1,100 mm Workpiece length: up to 11,000 mm Workpiece weight: up to 10 tonnes Max. outer diameter: 850 mm With up to 50,000 Nm torque, perfect for smooth drilling, honing and demanding finishing processes. Your advantages at a glance - Complete solution from a single source – from pre-drilling to finishing - Large workpieces up to 11 metres and 10 tonnes in weight - High process reliability thanks to perfect machine synchronisation - Ready for immediate use, well maintained and from ongoing operation - Ideal for mechanical engineering, energy, oil & gas, hydraulics and large parts manufacturing

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, controller manufacturer: Heidenhain, controller model: TNC640, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 26,500 h, coolant supply: 40 bar, spindle nose: SK40, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is in good condition and can be inspected while powered on. Podpfxszcuwno Aahjpu