Plate rolling machine

AKBEND ASM-S 200-25/6,0 MJ

Condition: good (used), Year of construction: 2008, machine/vehicle number: 82-N-001, Offer 24248 Technical data: Ihedpfx Ahetu Ul Rs Nst - max. working width 3050 mm - max. sheet thickness 5 - 6 mm - Roller diameter 200 mm - Stroke of front roller 200 mm - Working speed 4 m/min - Drive - brake motor 400 V / 7.5 kW - Space requirement approx. W 4900 x D 1300 x H 1400 mm - Weight approx. 5.0 t - with - two driven rollers - both bottom rollers motorized adjustable - bending - Hinged bearing for swiveling out the top roller - Extended roller ends for attaching profiled rollers - right + left rotation - separate mobile control panel with foot switch + digital display

Condition: ready for operation (used), Year of construction: 2001, control type: NC control, working width: 2,500 mm, sheet thickness (max.): 6 mm, back gauge: 1,000 mm, overall weight: 6,700 kg, total length: 2,800 mm, total width: 3,950 mm, total height: 1,900 mm, power: 7.5 kW (10.20 HP), stroke length: 450 mm, Motorized swing bending machine Manufacturer: HERA Model: SM4 2500x6mm Year of manufacture: 2001 Technical data Ijdpfx Ahswxc Rpj Neht Manufacturer: HERA Model: SM 4 Year: 2001 Capacity: 2520 x 6 mm Upper beam stroke: 450 mm Lower beam adjustment: max. 100 mm Bending beam adjustment: max. 100 mm Connected load: Upper beam 5.5 kW / Bending beam 7.5 kW Operating voltage: 400 V / 50 Hz Control voltage: 230 V Dimensions approx.: L 3.95 x W 2.80 x H 1.9 m Weight: 6.7 t Equipment • 2 x sharp rail • Bending rails: 10mm, 20mm, 40mm • Segmented gooseneck set: H 120mm • Motorized bending beam adjustment • Hydraulic tool clamping • Programmable backgauge 10–1000mm All information provided without guarantee. A live demonstration is possible at any time in our showroom.

Condition: new, - Capacity 1570 x 9 mm - Electrically adjustable rear roller - Electrically adjustable bottom roller (material clamping) - Digital readout for rear roller movement - Digital readout for bottom roller movement (material clamping) - Hardened rollers - Conical rollers - Swivelling top roller - Central lubrication system Ihsdpfx Aeg Ntlcsh Not - Brake motor - Emergency stop - Documentations - 400V

Year of construction: 2004, condition: ready for operation (used), A fully automatic Kasto band saw system is available. Cutting range at 90°: round material: 530mm, square material: 530mm/530mm, flat material: 530mm/640mm, saw blade length: 7675mm, saw blade width: 54mm, saw blade thickness: 1.6mm, cutting speed: 120m/min. Overall system dimensions X/Y/Z: approx. 5200mm/2700mm/2700mm, weight: approx. 6000kg. Including roller conveyors. Documentation available. On-site inspection is possible. Ihsdpfx Asv S E Edeh Njt

Condition: new, - Capacity 2070 x 6 mm - Electrically adjustable trailing roller - Electrically adjustable bottom roller (material clamping) - Digital display for rear roller movement - Digital display for bottom roller movement (material clamping) - Hardened rollers - Conical rolling - Rotatable top roller - Central lubrication system Isdpfxslht N Ij Ah Noht - Brake motor - Emergency stop - Documentation - 400V

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 163341, Country of manufacture: UK Voltage: 400V 3-phase AC 50/60Hz, max 58A Iodpow T Tp Rjfx Ah Nsht Dimensions: 200x260x250 cm Net machine weight: 5010 kg TECHNICAL SPECIFICATIONS Capacities Table dimensions: length 900 mm / depth 410 mm X-axis: 560 mm Y-axis: 410 mm Z-axis: 510 mm Distance from spindle nose to table surface: min. 150 mm, max. 660 mm Distance from spindle center to column: 540 mm Maximum table load: 500 kg Spindle Speed: 40 – 12,000 rpm Power (5 min): 18.5 kW Power (10 min): 15 kW Power (30 min): 10 kW Continuous power: 7.5 kW Feed Rapid traverse: 36,000 mm/min Cutting feed rate: 1 to 8,000 mm/min Table Dimensions: 900x410 mm T-slot size (ISO R299): 18 mm / Number: 3 / Spacing: 125 mm Permissible load: 500 kg Distance from floor to table surface: 780 mm ATC Tool Magazine Number of tools: 30 pcs Tool selection: free choice of station number; automatic bi-directional search Tool holder: MAS BT-40 Max. tool diameter in magazine: Ø 80 mm (without adjacent tool: Ø 125 mm) Max. tool weight: 8 kg Max. magazine load: 120 kg Max. tool length: 350 mm Tool change time: 2.9 s (chip-to-chip) Lubricant tank: 1.8 L Feed lubricant tank: 260 cm³ Spindle coolant tank: 16 L Hydraulic pressure tank: 460 cm³ Coolant tank: 200 L Compressed air: 0.5 to 0.9 bar Capacity: 200 L/min Subject to errors or omissions, all technical specifications are provided without guarantee.

Condition: good (used), Year of construction: 2001, Manufacturer: KASTO Type: KASTOtec A3 Year of construction: 2001 Specifications: Metric Metric US Standard Sawing capacity round 90 330 Sawing capacity flat 90° 330 x 330 mm Max. Sawing speed 12 - 120 Saw blade dimensions 6830 x 41 x 1.3 mm Saw power 7.5 kW Dimensions (estimate) length 4600 mm width 2150 mm height 2310 mm weight Ihedpfx Ahou R R Aco Not 4300 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: excellent (used), Year of construction: 2007, Equipment: CE marking, Punching Power 165 Ton Maximum capacity Ø 40 x 30 mm Ø 34 × 34 mm Shearing of Angles at 90º 205 x 205 x 18mm Shearing of Flat Bars 750 x 20 mm 400 x 30 mm Shearing of Round Bars 60 mm Shearing of Square Bars 60 mm Rectangular Notching 90 x 58 x 16 mm Ihjdewbu Tnspfx Ah Not Feel free to ask more information

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: SIEMENS, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 150 mm, roller (top) diameter: 150 mm, side roll diameter: 140 mm, roller diameter: 150 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 18 mm, working height: 800 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, overall weight: 2,800 kg, total length: 3,800 mm, total width: 1,200 mm, total height: 1,100 mm, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4 ROLL BENDING MACHINE NC HYDRAULIC MODEL 2000X6 MM / 4 MM PREBEND PROGRAMMABLE AUTOMATIC ROLLING NC 4 AXIS CONTROLLER Capacity: plate width 2000 mm thickness rolling 6 mm pre-bending 4 mm minimum diameter of rolling D= 180 mm depending on the plate thickness and strength Rollers length 2050 mm Upper roll size 150 mm Lower roll size 150 mm Rollers hardened surface high strength smooth surface finishing suitable for rolling stainless steel quality plates Conical plate rolling attachment Rotation electric powered on central rollers for bending traction of the plate Pre-pinch load variable upon plate thickness and strength Console electric commands push buttons with digital readout of the 4 rollers on the screen. NC programmable 4-axis to set automatic rolling with save 200 programs in memory front side hydraulic opening to remove the rolled shells speed slow/fast variable safety installation with emergency stop. Instruction manuals for operation and service. Layout mm 3800x1200xH1100 mm Weight 2800 Kgs Ihedpfew Hpzwox Ah Net

Condition: excellent (used), Year of construction: 2007, turning length: 1,545 mm, turning diameter over cross slide: 660 mm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, Make: MAZAK Type: INTEGREX 200-4 ST Control: MAZATROL MATRIX Year: 2007 Ijdsx S Hm Iopfx Ah Njht Multi-Tasking Machining in a Single Machine Setup Sub spindle for overtaking with full C-Axis The INTEGREX IV series can finish all machining processes. High speed, advanced milling spindle that can tilt up to 240 degrees swiveling. Lower turret with rotary tool spindle so livew tooling Chip conveyor with coolant and 15 Bar iKZ Double chuck KNCS-N 210-53 SMW Autoblock MAZAK Flex -GL150F Gantry Loader Gripping range 200 x 120 length x 15 Kg Max. turning Ø: 660mm X-Axis: 580mm Y-Axis: 160mm Z-Axis: 1545mm B Axis: 270° Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:5000Rpm Subspindle bore: 65mm Subspindle power: 18.5kW ATC / revolver: 40 B-Axis Toolsystem:Capto C6 B-Axis Speedranges:12000Rpm Length: 5200mm Width: 2550mm Height: 2600mm Weight: 14000kg