Used Wood shredder for sale (379)

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, Functionality: fully functional, machine/vehicle number: SH12005, Untha LR 630 Chipper Operating Hours: 1 h Demonstration Machine Ma. No. SH12005, Year 2024 Item Number: JA_G250303 Description Feed Opening: 624 x 792 mm Hopper Capacity: 0.43 m3 Rotor Diameter: 248 mm Speed: 98 rpm Power: 400V/50 Hz, 18.5 kW Blades: 17 Screen Hole: 15-20 mm Suction Nozzle: 160 mm Weight: Approx. 1300 kg Dimensions (W x D x H): 1740 x 1220 x 1670 mm Ceb Hev Tbqleflq Dsgt Cable Harness: 3 m + Connection for Screw Discharge Subject to errors and changes in technical specifications. Note for new machines: • Prices are for pickup (unless otherwise stated!) from our location in Ottendorf-Okrilla, Germany - Free shipping! (unless otherwise stated) • Subject to prior sale! • You will receive an invoice with VAT shown. • The buyer is free to inspect the items at the location. • Our general terms and conditions apply. • Special agreements are only possible in writing. • Any items in the background of the image are not included in the scope of delivery. • Saw blades are for illustrative purposes only and are not included in the scope of delivery. Shipping options: • We would be happy to provide you with a transport quote. • Pickup from our location in Ottendorf-Okrilla, free of charge upon request. (Assembly and instruction of the goods for demonstration purposes is optionally available upon request!) • Optionally, our trained service staff will assemble the machine at your location and provide you with a brief instruction. Travel, driving, and service times are subject to an additional charge.

Condition: like new (used), Year of construction: 2020, Functionality: fully functional, Volvo TAD 1373VE 345 kW diesel engine Tandem chassis, 80 km/h Conveyor belt Ceb Hov S U Dpoflq Dogt Complete hydraulics Grinding device

Condition: as good as new (ex-display), Year of construction: 2012, operating hours: 356 h, Functionality: fully functional, overall weight: 35,000 kg, fuel type: diesel, color: red, suspension: air, I will sell a Morbark 50/48B chipper, Caterpillar engine C27 (783kw-1050PS), inlet width 132x83cm, feed belt length 390 cm, 10 knives on the drum, high efficiency, the machine is used occasionally, 356 mtg!!! PERFECT CONDITION. TEL 791-511-013 Cjb Hevrtkueflq Degt

Condition: excellent (used), Year of construction: 2022, Morbark WH3000XP shredder from 2022 in good condition. Serial No. 196 1040 Csb Hjv Szcxjflq Dsgt

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 3 h, Functionality: fully functional, machine/vehicle number: 237042, power: 25 kW (33.99 HP), overall weight: 1,575 kg, fuel type: electric, color: yellow, From my own experience: The battery lasts a whole working day without any problems when continuously charged Internal number: M1241 Manufacturer: Schliesing Vehicle type: trailer chassis Drive type: electric Log diameter: Ø 20 Feed width (mm): 240 Engine power: 25 kW - torque of 120 Nm Year of manufacture: 2023 Operating hours: approx. 3 Own weight (KG): 1575 Equipment: Power Control System - whisper-cut shredding system The Schliesing mid-range is now also available as an electric shredder - the Schliesing 325MX-E shredder. The powerful brushless asynchronous motor with an output of 25 kW and a torque of 120 Nm ensures productive work with the usual pulling power. The batteries are designed to enable a full working day without charging. The 325MX-E enables emission-free chipping with low noise levels and offers uncompromising productivity for logs up to 20 cm in diameter. Engine and chassis: Brushless asynchronous motor with 25 kW and a torque of 120 Nm Fully galvanized, corrosion-resistant single-axle chassis for 80 km/h including EU homologation Robust, solid and widened sheet steel mudguards Solid support wheel at the front and parking support at the rear Towing device with overrun brake and soft dock ball coupling or DIN towing eye LED lighting in accordance with StVZO (impact-protected) Pneumatic tires 205/65 R15 C Battery: LEP battery (lithium iron phosphate) with a capacity of 300 Ah at 96 V Allows the chipper to be used for a full working day without charging. No recharging required during long downtimes Energy recovery through recuperation of the kinetic energy of the chipping disc during the work process Charging connection: protective contact plug 220-240V/16A Charging time for full charge: 8 hours Guarantee for 1000 charging cycles at 80% SOH (State of Health) Cob Hflqjvmz N Uj Dsgt Housing/hopper/blow-out pipe: Foldable intake hopper with at least 1,500 mm input depth Fully galvanized, corrosion-resistant hopper flap Funnel dimensions (inside): width = 1,040 mm, height = 960 mm Pivoting blow-out pipe with adjustable spreading flap Blow-out pipe on ball bearing slewing ring Relevant machine parts with sound insulation (especially chipper hood and blow-out pipe) Two emergency stop buttons on top of the hopper and on the side of the hopper flap Chipping mechanism: Chipping mechanism with safety circuit according to EN 13525 Robust chipping disc Ø 655 mm, 35 mm thick Closed blade system for quick, safe and precise blade changes Continuously adjustable chipping blades Chipping blades can be resharpened multiple times for a long service life (approx. 10x) Horizontally usable counter blade and vertically usable counter blade, each 2-fold for a long service life Winding protection on the main bearing of the chipping disc Hydraulic feed: Feed control with its own hydraulic circuit PowerGrip feed roller, 240 mm wide, with hydraulic feed. Particularly grippy, aggressive and even feed thanks to one oil motor per roller Parallel-guided top roller for regular and even feed to prevent jamming of the fed material Hydraulically adjustable feed speed and thus the wood chip size Fill level indicator for hydraulic oil tank OPTION OVERVIEW: The Whisper Cut® V-shaped blades feed the wood more evenly and with less vibration In combination with the centering PowerGrip roller, the chopped material hardly swings back and forth

Condition: excellent (used), Mobile - for transport by hooklift. 400V power supply 37kW main engine 2 receiving belts Hydraulically foldable deflector arm Ceb Hflqjv Snc Ej Dsgt

Condition: used, Year of construction: 2011, operating hours: 744 h, overall weight: 1,500 kg, fuel: electricity, No. 04437 Chipper / Shredder Balduf PZ 63-1 Used, year of manufacture 2011, only 744 operating hours Made in Germany For various materials, e.g. wood, plastic, etc. Hopper opening 800 x 630 mm Electrical connection 400 V / 19.25 kW Rotor diameter 260 mm Rotor width 630 mm 30 interchangeable blades 30 x 30 x 15 (15 standard, 15 concave) Sieve diameter 30 mm SPS Siemens S 7 200 control system Automatic & manual operation possible Hydraulic operating pressure 160 bar Suction nozzle diameter 160 mm Including technical documentation Transport dimensions approx. 1800 x 1250 x 1800 mm LWH Weight 1500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical data, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Cgeb Hjuxbccoflq Dot For used machines, any warranty is excluded, the following applies: “purchased as viewed” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location

Condition: as good as new (ex-display), Year of construction: 2023, Special price for our prefeeder Another machine, available immediately (ex works Neckartailfingen) approx. 24 operating hours. Suitable for shredding all types of waste wood and pallet offcuts. The pallet should be prepared with the jigsaw or chainsaw so that it fits upright in the hopper - see picture 2. 40x20x20 cm would be ideal so that the wood can lie flat on the pusher floor. This is where the machine works most effectively. At the bottom of the shredder there is a hydraulic pusher which presses the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput of up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overbelt magnet at extra charge. + Powerful 18.5 kW motor, + concave knives, + large high-performance gearbox, + special, load-dependent pusher control, Product code: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 ph. Knives: 15 pieces, multi-rotatable Option double row of blades + 995 € net Rotor diameter: 260 mm Control: SPS Siemens S7-1200 Cutting unit opening 630 x 820 mm Filling volume approx. 0.6 qbm Hydraulically operated pusher Screen perforation of your choice (10 - 30 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg (depending on accessories) Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm Moisture content: ᐸ 30 % Atro . Included as standard: - V-rotor for maximum throughput - Switch cabinet with Siemens PLC control - Automatic star/delta start Cgebjdwktks Hflq Dst - fast hydraulics - auto. OFF when the rotor is idling - speed 70-90 rpm for high throughput capacity - Cycle control to avoid idling times - Performance-enhancing step control of the hydraulic slider - Pertinax guides for hydraulic slide - Vibration-damping machine feet - CE Conform. - MADE IN GERMANY . Shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Folding conveyor belt +8,770 € net Horizontal part: 1200 mm Rising part: 2500 mm Angle: 0-60 degrees adjustable Discharge height: approx. 2000 mm + - 100 mm - Overbelt magnet + € 5,980 net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) - Hopper adjustment + 940 € net - Eco rings: + € 1,980 net (recommended for more than 15 % hardwood) - Special scraper + 990 € net (recommended for veneer or paper) - Double row of knives + 995 € net . Requirements for the raw material: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones etc. lead to increased wear.

Condition: used, Vecoplan drum chipper type 65/12/2 for the efficient shredding of wood waste, round wood and board material into wood chips. The robust construction and powerful chipping mechanism enable reliable processing with consistent chip quality. Ideal for sawmills, wood processors and biomass plants. Cebov Hqmvo Hflq Dsgt feed width: 650 mm intake height: 150 mm rotor ø: 400 mm number of knives: 4 engine: 50 kW hole size (sieve): 20 mm material supply: vibrating trough (4 m)

Condition: reconditioned (used), Year of construction: 2022, Functionality: fully functional, power: 18.5 kW (25.15 HP), Feed opening: 600 x 800 mm Hopper capacity: 0.6 m3 Rotor diameter: 252 mm Rotor working width: 600 mm Rotor speed: 60 – 100 rpm Cutting system: 14 blades 40 x 40 mm Screen perforation: 12/15 mm or as desired Control: Electronic via PLC Control cabinet: Fully wired, including 5 m cable Motor power: 18.5 kW Connected load: 400 V +/- 5% / 50 Hz Suction nozzle diameter: 160 mm Overall dimensions approx.: L = 1,800 mm, W = 1,230 mm, H = 1,640 mm Weight: approx. 1,300 kg Incl.: Automatic star-delta start-up Automatic star-delta start-up Automatic idle shutdown  Vibration-damping machine feet  CE-compliant Cgjb Hfjv Sccyjlq Djt  GS mark "dust-tested"

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 170 h, Functionality: fully functional, machine/vehicle number: MKS20728, power: 36.8 kW (50.03 HP), overall weight: 560 kg, color: yellow, Technical data: TYPE Schliesing 175MX LOGS: Up to Ø 16 cm FEEDING WIDTH 24 cm DRIVE POWER 18–36.8 kW / 25–50 HP WEIGHT approx. 560 kg 3-point rear attachment (540 rpm) Operating hours: approx. 170 Logs up to 16 cm Feeding width 240 mm Basic weight approx. 550 kg Recommended drive power: 18–36.8 kW (25–50 HP) Cardan shaft with freewheel. Properties: Drive and attachment: Wood chipper with PTO drive. 3-point rear attachment with an operating speed of 540 rpm. Recommended drive power from 18 to 36.8 kW (25 to 50 HP). PTO shaft with freewheel for safe operation. Fully galvanized, light and solid base frame for stability and durability. Housing/hopper/blow-out pipe: Foldable intake hopper with a minimum input depth of 1,500 mm. Hopper dimensions (inside): width = 890 mm, height = 720 mm. Fully galvanized, light and stable base frame for optimal support. Pivoting blow-out pipe with adjustable spreading flap for precise blowing. Noise insulation on relevant machine parts such as the chipper hood and the blow-out pipe. Two control units (right and left) and three emergency stop buttons for increased safety. Chipping mechanism: Safety circuit in accordance with EN 13525. Chipping disc with a diameter of Ø 655 mm and a thickness of 30 mm. Closed blade system for quick, safe and precise blade changes. 2-blade chipping disc with continuously adjustable blades. Cgob Hflqjvmz Rxo Dst Chipping knives can be resharpened multiple times for a long service life. Horizontal counter knife and vertical counter blade can each be used twice for a long service life. Winding protection on the main bearing of the chipping disc. Hydraulic feed: Feed control with its own hydraulic circuit. PowerGrip feed roller (240 mm wide) with hydraulic feed for easy and even material transport. Parallel guidance of the top roller for even feed without jamming. Hydraulic adjustable feed speed to control the wood chip size.

Condition: excellent (used), 15 kW motor Inlet opening size: 600 x 800 Number of blades: 14 Cgob Hfljv R Tz Rsq Dst Screen: 20 mm/1.5 mm

Condition: used, Year of construction: 2018, No. 3085 Chipper / material shredder WEIMA WLK 800 used, year of construction 08/2018 approx. 1200 operating hours For various materials such as hard plastics, paper, foils, filaments, wood or textiles. Feed opening 800 x 1450 mm F rotor Rotor diameter 260 mm Rotor speed approx. 100 rpm Motor power 30 kW knife screwed incl. various spare knives and sieves Transport dimensions approx. 3400 x 1750 x 2100 mm LWH Weight approx. 2500 kg Sales on behalf of customers, from the Hesse location In order to avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale takes place in the ACTUAL condition Technical information, description of condition, year of construction and scope of delivery according to the manufacturer's brochure or previous owner, without guarantee Cgob Hekzkwmoflq Dot Subject to prior sale Any warranty is excluded for used machines. The rule is "bought as seen". Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus statutory VAT, payment before pickup or shipping Terms of delivery: ex warehouse or location

Condition: new, Year of construction: 2023, The ideal machine for shredding hardwood and softwood Another machine, available immediately (ex works Neckartailfingen) . Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Knives: 14+2 pieces, 40x40mm, multiple rotatable, Rotor diameter: 260 mm, Control: Omron SPS, Cutting unit opening 600 x 800 mm, hopper volume approx. 0.6 qbm, hydraulically operated pusher Screen perforation of your choice (12 - 40 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm . The following options are available at extra cost: - Additional row of knives + 995 € net (28 instead of 14) - Surcharge for 4-sided segment shelf + € 2,170 net (prevents blocking of the pusher. Recommended for materials with a thickness of less than 3 mm) - Raise shredder by 30 cm (preparation for conveyor belt) + € 1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + € 5,980 net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) Cgeb Hjd E R D Ssflq Dot - Special bearing +1,540 € (rarely required. Closed, even more stable rotor bearing. Possibly a consideration for sieves smaller than 15 mm or with a lot of fines. Not necessary if the bearings are lubricated with grease every approx. 2 weeks during operation) . Requirements for the raw material: - The moisture content (atro) must be below 30 % - Metals and mineral impurities such as sand, stones etc. lead to increased wear. . We will be happy to carry out a free test with your material and invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: excellent (used), shaft diameter 40mm shaft length 680mm knives - cubic hydraulic shaft drive pump motor power 45kW hydraulic pressing unit Cjb Hfsv Ef Ixslq Djgt strainer 30mm

Condition: used, Year of construction: 2014, operating hours: 1,400 h, tire size: 650/55-26.5, Used JENZ 360 wood schredder - incl. Veenhuis tipping trailer - year 2014 - 1400 h - dimension tipping part: 4000 x 2000 x 2000 mm Cjb Hfov Egbgolq Dogt

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 26 h, Functionality: fully functional, machine/vehicle number: 227057, power: 18.5 kW (25.15 HP), fuel type: diesel, color: yellow, Technical data: Type: 235 MX Logs: Up to 19 cm in diameter Operating hours: Approx. 15 Year of manufacture: 2022 M 1182 Fixed chipper housing Intake width: 240 mm Basic weight: approx. 1,370 kg Equipped with normal cut and power control system Engine power: 18.5 kW (25.2 HP), EU-V 4-cylinder Kubota Stage V diesel engine Fully galvanized single-axle chassis (80 km/h) Towing device with overrun brake, support wheel at the front, parking support at the rear Lighting in accordance with StVZO (impact-protected) Features: Logs up to Ø 19 cm: The 235 MX-D is a powerful bush wood chipper that eats through logs with a diameter of up to 19 cm. Intake width 24 cm: With an intake width of 24 cm, the chipper enables efficient chipping of wood. Robust construction: The chipper is robustly built and offers a long service life even under demanding conditions in gardening and landscaping. Cgsb Hovmz Spsflq Dot Engine and chassis: Water-cooled Stage V 4-cylinder Kubota diesel engine: With 18.5 kW (25.2 HP), the engine offers the necessary power for efficient work. Industrial freewheel clutch: Automatically acts between the engine and chipping disc to protect the engine, bearings and shaft. Fully galvanized, corrosion-resistant single-axle chassis: For a speed of up to 80 km/h with EU homologation. Housing/hopper/blow-out pipe: Foldable intake hopper: With a minimum input depth of 1,500 mm for easy handling. Fully galvanized, corrosion-resistant hopper flap: For a long service life and reliable operation. Chipping mechanism: Chipping disc Ø 655 mm, 35 mm thick: With a closed knife system for quick, safe and precise knife changes. Continuously adjustable chipping knives: For individual adaptation to requirements. Hydraulic feed: Feed control with its own hydraulic circuit: For precise control of the feed. PowerGrip feed roller: With hydraulic feed for a grippy, aggressive and even feed. Safety: Complies with the safety regulations of DIN-EN 13525: For safe operation and compliance with the relevant standards.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 5,000 h, Functionality: fully functional, operation weight: 12,000 kg, Hello, I have for sale a Biber 80 plus Valtra S 280/4 chipper assembly, tractor production year 2003, good condition, Sisu engine, twintruck air conditioning, reverse drive, Biber 2007 editor, inlet 100/65cm, 8 knives, Kronos crane 8.3m weight 12 tons, machines in good condition, after inspection. I invite you. Cob Hfov Nxb Hslq Degt

Condition: excellent (used), Year of construction: 2015, Weima shredder WLK 800/37 kW Technical specification: Hopper clearance: 800 x 1,450 mm Cutting chamber dimensions: 720 x 700 mm Hopper capacity: approx. 0.8 m3 Working width of the rotor: 800 mm Rotor diameter: 260 mm Pusher path with segment floor: 700 mm Drive power: 37 kW Rotor speed: 100 rpm Number of blades (2-row): 42 pieces Type and size of knives: concave / 40 x 40 mm, reversible cutting crowns Screen perforation: 40 mm with secondary crusher bars Paint finish: Weima standard RAL 2002 / 7016 Connected load: 400 V +/- 5 % / 50 Hz including: V-rotor with knife pockets milled into the profile Two rows of blades on V-rotor Welded blade carriers and screwed blades with countersunk blade screws Super Cut (adjustable counter blade) for regulating the cutting gap Reversible counter blade K-bearing, offset, closed, low-maintenance self-aligning ball bearings Fast hydraulics for pusher backwards with various adjustment options Shock valve sits directly on the slider cylinder Slide chamber unpainted Switch cabinet (Rittal) with 5 m cable SPS control / Siemens Cardanically suspended pusher cylinder with load-dependent controlled drawer Machine frame on rubber suspension elements Segmented floor on 2 sides Safety package Gear limit switch and reversing counter Electromechanical drive with Weima WAP gearbox Manually swiveling screen basket Quick access screen (door) Gearbox oil cooling prepared Hydraulics fast forward Feed hopper "heavy duty" Hydraulic oil preheating Hydraulic oil cooling Cgeb Hfsuzagfslq Det Plug for conveyor belt + electrical integration Conveyor belt cut-out 600 mm Imro Maschinenbau Used discharge conveyor belt with 1.1 kW Type: 500 x 1200 / 4900 Year 2015 Machine number: 510-2770 Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2018, Weima shredder WLK 800/37 kW Year 2018 Technical specification: Hopper clearance: 800 x 1,450 mm Cutting chamber dimensions: 720 x 700 mm Hopper capacity: approx. 0.8 m3 Working width of the rotor: 800 mm Rotor diameter: 260 mm Pusher path with segment floor: 700 mm Drive power: 37 kW Rotor speed: 100 rpm Number of blades (2-row): 42 pieces Type and size of knives: concave / 40 x 40 mm, reversible cutting crowns Screen perforation: 40 mm with secondary crusher bars Paint finish: Weima standard RAL 2002 / 7016 Connected load: 400 V +/- 5 % / 50 Hz including: V-rotor with knife pockets milled into the profile Two rows of blades on V-rotor Welded blade carriers and screwed blades with countersunk blade screws Super Cut (adjustable counter blade) for regulating the cutting gap Reversible counter blade K-bearing, offset, closed, low-maintenance self-aligning ball bearings Fast hydraulics for pusher backwards with various adjustment options Shock valve sits directly on the slider cylinder Slide chamber unpainted Switch cabinet (Rittal) with 5 m cable Cob Hot Ix Iyjflq Degt SPS control / Siemens Cardanically suspended pusher cylinder with load-dependent controlled drawer Machine frame on rubber suspension elements Segmented floor on 2 sides Safety package Gear limit switch and reversing counter Electromechanical drive with Weima WAP gearbox Manually swiveling screen basket Quick access screen (door) Gearbox oil cooling prepared Hydraulics fast forward Heavy duty" feed hopper Hydraulic oil preheating Hydraulic oil cooling Plug for conveyor belt + electrical integration Conveyor belt cut-out 600 mm Imro Maschinenbau Used discharge conveyor belt with 1.1 kW Type: 500 x 1200 / 4900 Year 2015 Machine number: 510-2770 Location: ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2025, Quiet and slow runner WL 4/18,5 kW Technical data: Hopper opening: 600 x 800 mm Hopper opening with logspacer: 600 x 1050 mm hopper capacity: approx. 0,6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Number of knives: 28 pieces Knives: 40 x 40 mm concave Sieve perforation: 15/20 mm Included: Control cabinet Electrical control Cgjb Hsbunq Hoflq Djt Star-delta start-up Rubber vibrating elements 2nd row of knives Logspacer (free cutting hopper) Location: 54634 Bitburg Immediately available

Condition: as good as new (ex-display), Year of construction: 2025, Quiet and slow runner WL 4/18,5 kW Technical data: Hopper opening: 600 x 800 mm Hopper opening with logspacer:600 x 1050 mm hopper capacity: approx. 0,6 m³ Working width of the rotor: 600 mm Cgeb Hfobtnftslq Dot Diameter of the rotor: 252 mm Number of knives: 28 pieces Knives: 40 x 40 mm concave Sieve perforation: 15/20 mm Included: Control cabinet Electrical control Star-delta start-up Rubber vibrating elements 2nd row of knives Logspacer (free cutting hopper) Top equipment Location: Ex stock Bitburg - immediately available - at a special price

Condition: new, Year of construction: 2025, Weima chipper / shredder WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used, for example, thousands of times in wood-processing plants all over the world. The high quantity of these highly demanded shredders guarantees a proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely long service life (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display. To ensure that the electronics are optimally matched to the machine, we design, build and wire our control cabinets ourselves. We only use high-quality components - for example from Siemens or Rittal. Intuitive touch interfaces guarantee quick adjustments. Functions such as setting the slider clock or stop ensure high throughput. The built-in overload protection also prevents defects in the machine. No material bridges due to free-cutting hopper design The hopper fulfills several tasks at once. First, the material to be shredded is fed through it - manually, mechanically, or by conveyor belt. The generous opening makes it easy to fill even very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridges, is decisive for shredding. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas pressure springs are available. Durable rotor bearings thanks to offset design Csb Hfsmhh Idolq Dogt A rotor bearing must be particularly robustly built due to the extreme stresses it is subjected to during shredding operation. To prevent dust or foreign matter from getting inside it, we have set it apart from the machine frame. This also makes it very maintenance-friendly and easy to access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (rpm): 80 - 125 Power (kW) 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): Suction port (mm): 200 Feed opening (mm): 1000 x 1250 length (mm): 2045 width (mm): 1740 height (mm): 1840 Weight (approx. kg): 2200 Accessories: - 2nd row of knives - logspacer Location: Comes to stock 54634 Bitburg

Condition: new, Year of construction: 2025, Weima single shaft shredder type WL 6 Power 18,5 kW Our machine concept WL 6 The Weima high performance shredders with their flexible can process all kinds of wood materials (hardwood, softwood, chipboard, MDF materials softwood, chipboard, MDF materials, plywood, veneer residues etc. ) into and, in the case of bulky materials, achieve an enormous volume reduction of the material. enormous volume reduction of the material. Mode of operation: The machine is equipped with a large hopper and can be fed by a conveyor belt or by hand. fed by means of a conveyor belt or by hand. This hopper Cgob Hfsh Eiw Ielq Dot can be adapted to individual needs and guarantees a continuous and cost effective and cost effective material feed without the need for manual assistance. manual assistance. Vqwemi Technical specification WL 6 / 18,5 kW Hopper opening: 800 x 1.000 mm hopper capacity: 0,9 m³ working width of the rotor: 800 mm diameter of the rotor: 252 mm Driving power: 18,5 kW Rotor speed: 80 -120 rpm Number of knives: 42 pieces type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Sieve perforation: 10-60 mm possible (standard 15-20 mm) Painting: WEIMA standard RAL 2002 / 7016 connected load: 400 V +/- 5% / 50 Hz weight: approx. 1.600 kg Included: - Switch cabinet ( Rittal ) incl. electrical control ( Moeller / Siemens ) and star-delta start-up - Rubber oscillating elements - V - rotor ( patented ) with knife pockets fixed in the profile - gear limit switch - On

Condition: new, Year of construction: 2025, Weima single shaft shredder type WL 6 Power 18,5 kW Our machine concept WL 6 The Weima high performance shredders with their flexible can process all kinds of wood materials (hardwood, softwood, chipboard, MDF materials softwood, chipboard, MDF materials, plywood, veneer residues etc. ) into and, in the case of bulky materials, achieve an enormous volume reduction of the material. enormous volume reduction of the material. Mode of operation: The machine is equipped with a large hopper and can be fed by a conveyor belt or by hand. fed by means of a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost effective and cost effective material feed without the need for manual assistance. manual assistance. Technical specification WL 6 / 18.5 kW hopper opening: 800 x 1.000 mm hopper capacity: 0,9 m³ working width of the rotor: 800 mm diameter of the rotor: 252 mm Driving power: 18,5 kW Cgebjh Hnp Do Hflq Dst Rotor speed: 80 -120 rpm Number of knives: 42 pieces type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Sieve perforation: 10-60 mm possible (standard 15-20 mm) Painting: WEIMA standard RAL 2002 / 7016 connected load: 400 V +/- 5% / 50 Hz weight: approx. 1.600 kg Included: - Switch cabinet ( Rittal ) incl. electrical control ( Moeller / Siemens ) and star-delta start-up - Rubber oscillating elements - V - rotor ( patented ) with knife pockets fixed in the profile - gear limit switch - Contact pressure