Used wood shredder for sale (296)

Condition: as good as new (ex-display), Year of construction: 2026, Low-noise and slow-speed model WL 4/18.5 kW Technical data: Hopper opening: 600 x 800 mm Hopper opening with log spacer: 600 x 1050 mm Hopper capacity: approx. 0.6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Number of knives: 28 pieces Knives: 40 x 40 mm, concave Screen hole size: 15/20 mm Included: Control cabinet Electrical control system Star-delta starter Rubber vibration dampers 2nd knife row Log spacer (free-cutting hopper) Location: 54634 Bitburg Ledpfx Aijbunq Hjiern Available immediately

Condition: new, Year of construction: 2024, Chopper knife Ljdjbxu Dhspfx Aiijrn 40 x 40 concave Knife for Weima, large size ... Suitable for almost all common shredders/granulators Available from stock in Bitburg Subject to prior sale

Condition: new, Year of construction: 2026, Weima Single-Rotor Shredder Type WL 6 Power: 18.5 kW Our WL 6 Machine Concept Lrjdpfx Ash Hnp Dsiion The Weima high-performance shredders, with their flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into fuel chips, achieving an enormous volume reduction of the material, especially with bulky materials. Operating principle: The machine is equipped with a large feed hopper and can be fed by means of a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. Technical Specifications WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper capacity: 0.9 m³ Working width of the rotor: 800 mm Diameter of the rotor: 252 mm Drive power: 18.5 kW Rotor speed: 80 - 120 rpm Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, cutting reversible edges Screen size: 10-60 mm possible (standard 15-20 mm) Paint: WEIMA standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: - Control cabinet (Rittal) incl. electrical control (Moeller / Siemens) and star-delta starter - Rubber vibration dampers - V-rotor (patented) with knife pockets milled into the profile - Gearbox end switch - Pressing bar - Very robust Weima WAP gearbox - Log spacer (self-cleaning hopper) - 2nd knife row Available from stock in 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Weima Single-Rotor Shredder Type WL 6 Power: 18.5 kW Our WL 6 machine concept The Weima high-performance shredders, with their flexible application possibilities, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into fuel chips, and achieve an enormous volume reduction of the material, especially with bulky materials. Mode of operation: The machine is equipped with a large feed hopper and can be fed either by a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. Technical specifications WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper volume: 0.9 m³ Working width of the rotor: 800 mm Diameter of the rotor: 252 mm Drive power: 18.5 kW Rotor speed: 80 - 120 rpm Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Screen perforation: 10-60 mm possible (standard 15-20 mm) Paint: WEIMA standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: - Control cabinet (Rittal) including electrical control (Moeller / Siemens) and star-delta starter - Rubber vibration dampers - V-rotor (patented) with knife pockets milled into the profile - Gearbox limit switch - Pressure bar - Very robust Weima WAP gearbox - Logspacer (self-clearing hopper) - 2nd knife row Available from stock in 54634 Bitburg Lrjdpfx Aoh Eiw Ioiisn - immediately available - Request more information

Condition: new, Year of construction: 2026, Weima chipper / shredder WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used, for example, thousands of times in wood-processing plants all over the world. The high quantity of these highly demanded shredders guarantees a proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely long service life (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display. To ensure that the electronics are optimally matched to the machine, we design, build and wire our control cabinets ourselves. We only use high-quality components - for example from Siemens or Rittal. Intuitive touch interfaces guarantee quick adjustments. Functions such as setting the slider clock or stop ensure high throughput. The built-in overload protection also prevents defects in the machine. No material bridges due to free-cutting hopper design The hopper fulfills several tasks at once. First, the material to be shredded is fed through it - manually, mechanically, or by conveyor belt. The generous opening makes it easy to fill even very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridges, is decisive for shredding. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas pressure springs are available. Durable rotor bearings thanks to offset design A rotor bearing must be particularly robustly built due to the extreme stresses it is subjected to during shredding operation. To prevent dust or foreign matter from getting inside it, we have set it apart from the machine frame. This also makes it very maintenance-friendly and easy to access. Rotor diameter (mm): 260 Lrsdpfxemhh Ids Aiien Rotor length (mm): 1000 Rotor speed (rpm): 80 - 125 Power (kW) 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): Suction port (mm): 200 Feed opening (mm): 1000 x 1250 length (mm): 2045 width (mm): 1740 height (mm): 1840 Weight (approx. kg): 2200 Accessories: - 2nd row of knives - logspacer Location: Comes to stock 54634 Bitburg

Condition: new, Year of construction: 2026, Weima chipper / shredder WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used, for example, thousands of times in wood-processing plants all over the world. The high quantity of these highly demanded shredders guarantees a proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely long service life (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display. To ensure that the electronics are optimally matched to the machine, we design, build and wire our control cabinets ourselves. We only use high-quality components - for example from Siemens or Rittal. Intuitive touch interfaces guarantee quick adjustments. Functions such as setting the slider clock or stop ensure high throughput. The built-in overload protection also prevents defects in the machine. No material bridges due to free-cutting hopper design The hopper fulfills several tasks at once. First, the material to be shredded is fed through it - manually, mechanically, or by conveyor belt. The generous opening makes it easy to fill even very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridges, is decisive for shredding. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas pressure springs are available. Durable rotor bearings thanks to offset design A rotor bearing must be particularly robustly built due to the extreme stresses it is subjected to during shredding operation. To prevent dust or foreign matter from getting inside it, we have set it apart from the machine frame. This also makes it very maintenance-friendly and easy to access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (rpm): 80 - 125 Power (kW) 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): Suction port (mm): 200 Feed opening (mm): 1000 x 1250 length (mm): 2045 width (mm): 1740 height (mm): 1840 Weight (approx. kg): 2200 Accessories: - 2nd row of knives - logspacer Location: Ex stock 54634 Bitburg Ljdpfx Aijpdqzxeisrn - immediately available -

Condition: new, Year of construction: 2024, Single-shaft shredder HOKUTech special offer model H600 Compact, robust, high throughput Lrsdjutmw Hepfx Aiion The H600 high-performance shredder with its flexible application options can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer residues, etc.) into chips and achieves an enormous reduction in the volume of bulky materials. The hydraulically controlled pusher feeds the wood waste to be shredded into the cutting area of the rotor and is controlled automatically and load-dependent. The high-performance solid steel electric rotor has a diameter of 252 mm and operates at a rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-way rotating knives / reversible cutting crowns are located in milled knife pockets on special knife carriers. This highly efficient system guarantees high throughput, low energy consumption and optimum discharge of the shredded material by reducing the cutting gap between the counter blade and the rotor. Chip size (10 - 60 mm) Technical data: - Hopper opening - Hopper capacity - Working width of the rotor - Diameter of the rotor - Drive power - Rotor speed 600 x 800 mm 0.6 m3 600 mm 252 mm 15 kW 90 rpm Location: Comes to stock 54634 Bitburg - available by arrangement -

Condition: new, Year of construction: 2026, Weima Single-Rotor Shredder, Type WL 6 Lrjdpfxscbtpko Aiijn Power: 18.5 kW Our WL 6 machine concept: The Weima high-performance shredders, with their flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF, plywood, veneer remnants, etc.) into fuel chips, achieving a significant volume reduction of the material, especially with bulky materials. Mode of operation: The machine is equipped with a large feed hopper and can be fed via a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. Technical Specifications WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper capacity: 0.9 m³ Working width of the rotor: 800 mm Diameter of the rotor: 252 mm Drive power: 18.5 kW Rotor speed: 80 - 120 RPM Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, cutting reversible edges Screen size: 10-60 mm possible (standard 15-20 mm) Paint finish: WEIMA standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: - Control cabinet (Rittal) incl. electrical control (Moeller / Siemens) - Star-delta starter - Rubber vibration dampers - V-rotor (patented) with knife pockets milled into the profile - Gearbox limit switch - Presser bar - Very robust Weima WAP gearbox Recommended accessories - Log spacer (free-cutting hopper) - 2nd knife row Available from stock in 54634 Bitburg - immediately available -

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, power: 45 kW (61.18 HP), overall weight: 4,700 kg, color: grey, Maximum chipping height: mm 200 Feed-in width: mm 650 Lrodpfjynzg Hjx Aiien Feed rollers: units 3 Rotor fly circle: mm 600 Chip length approx.: mm 20–30 Output capacity: 18–22 cubic meters/hour of wood chips Chipping knives: units 2 Feed motors: kW 2 x 3 Net weight approx.: kg 4700 Feed: horizontal Machine frame: steel, gas-shielded welded Rotor: steel, gas-shielded welded, dynamically balanced Bearings: oversize roller bearings Bearing housing: steel, flange housing Feed rollers: steel, special toothed Chip discharge: located below the machine Machine grate: (sieve) for post-shredding of oversized pieces Drive pulley: matched to main motor, N = 1500 rpm Hydraulic system: comprising hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting the upper feed roller Feed system: by 2 geared motors, manufacturer NORD GETRIEBE

Condition: refurbished (used), functionality: fully functional, Erjo 90 HSMU 802 – Fully refurbished and in like-new condition. Lrjdpfxjzc Iuyo Aiion

Condition: reconditioned (used), functionality: fully functional, Bruks 803CS chipper in very good condition. Lrodjzc It Aepfx Aiion

Condition: ready for operation (used), Year of construction: 2018, operating hours: 550 h, functionality: fully functional, power: 16.92 kW (23.00 HP), fuel type: gasoline, We offer you: Chipper – Garden Chipper Eliet Super Prof Max on wheeled chassis Ljdpfxoy D I I Re Aiisrn Year of manufacture: 2018 520 operating hours Equipped with a powerful 23 HP Vanguard EFI engine Hydraulic wheel drive Hydraulic feed roller with forward & reverse Up to 13 cm branch diameter Folding discharge chute, swivels 280 degrees Electromagnetic engagement of knives 24 knives distributed over 6 discs Feed opening: 500 x 700 mm Approx. 6.5 m³ of chips per hour Noise level: 116 dB(A) Weight: 441 kg The machine is also available for rent.

Condition: excellent (used), CATALOGUE NUMBER 8013 TECHNICAL DATA - inlet width 450mm - inlet height 210mm - shaft width 450mm - shaft diameter 550mm - number of knives 2 pcs - traction shaft, toothed, top and bottom 2 × 2.2kW - additionally, a toothed traction roller at the bottom, in front of the traction shaft - electric auto-reverse (with adjustable settings) - reverse gear - belt conveyor - conveyor length 2260mm - conveyor belt width 430mm - main motor 45kW - overall dimensions of the conveyor (length/width/height) 4900x1700x1700mm - weight approximately 3000kg ADVANTAGES – with belt conveyor – electric auto-reverse – reverse gear – used shredder, very good condition Lrsdpfxezbb H Hj Aiijn Net price: 76900 PLN Net price: 18310 EUR, depending on an exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Condition: new, Year of construction: 2025, Overbelt magnetic separator, magnetic tape, overbelt magnet, magnet separator, metal detection, demetallization plant Our all-round talent - overbelt magnetic separator is for sale Permanent overbelt magnetic separator TYPE PEM1200 1200x550x200mm ===== 4x ring screw for suspension PU conveyor belt endless GB30 black matt Magnet dimensions: 700x230x120mm 7 x T20 studs high-frequency welded Ledpfxjhupkmj Aiisrn High-quality triple aluminum construction Inner bearing lubrication for 10,000 operating hours. Degree of protection: IP-55 0.18 KW three-phase gear motor GEMOTEG 2 pcs. side protection plates V4A Magnetic core encased in soft iron, so that a very high permeability can be guaranteed. Underbody tightly closed and sealed with stainless steel plate and pole pieces.

Condition: new, Year of construction: 2026, Aluminum angled conveyor with substructure Including adjustable feet as well as machine feet for leveling uneven surfaces Horizontal section: 3,500 mm Inclined section: 2,100 mm Inclination angle at bend: 45° Total conveyor length measured on the floor: 5,000 mm Discharge height: 2,000 mm Height of horizontal section: 500 mm Design: Aluminum structural construction - Triple-reinforced profile 135x45 mm - Full-surface discharge sheet 2.0 mm, galvanized Drive drum + tail drum made from S235 steel, welded and machined Ø150x820 mm, crowned, shaft mounted in plummer blocks. Drive: Shaft-mounted gear motor 1.1 kW, belt speed 0.77 m/sec Connection 230/400V, 50Hz, protection class IP54 Drive prewired to motor terminal box (Commissioning must be performed by qualified electricians) PVC conveyor belt DM 15/4 0+007 PVC including PVC wave edge, green Belt width: 800 mm 2 pcs. wave edges, 80 mm high, 50 mm wide, high-frequency welded 32 pcs. T-50 cleats, approx. 355 mm spacing Belt material: 2-ply, especially cross-stable At the bend, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on each side. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 490 mm, calculated as follows: (top view) transverse arrangement 100+50+5+490+5+50+100 mm Discover custom solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailored solutions for the recycling, food, and processing industries. Our extensive product portfolio ranges from conveyor systems and flat conveyors to incline conveyors, angled conveyors, and Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnetic separators, drum magnetic separators, and dosing bunkers – all according to our customers’ specific requirements. Lrodpfx Asyhzhusiisn We understand that every industry and project is unique. That’s why we customize our solutions to your individual needs and specifications. Complex projects are an exciting challenge for us, and we look forward to working with you to develop innovative solutions. With us, there is no such thing as a special solution – we find the right solution for every problem! Challenge us! Contact us and discover how we can transform your requirements into customized solutions. Together, we will shape the future of your production processes! Conveyor, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grate, metal separator, block magnet, filter systems, dosing bunker, feed bunker, filling systems

Condition: new, Year of construction: 2026, Aluminum Angled Conveyor Belt with Substructure including adjustable feet and machine feet for leveling uneven surfaces Horizontal section: 2,500 mm Inclined section: 6,000 mm Incline angle at the bend: 45° Height of the horizontal section: 350 mm Total conveyor length measured on the floor: 6,750 mm Discharge height at the end of the conveyor: 4,500 mm Design: Aluminum construction - Double profile reinforced 90x45 mm - Full-surface discharge sheet 2.0 mm galvanized Drive drum and return drum S235 steel, welded and machined Ø100x620 mm crowned and turned, shaft fixed with pillow block bearings. Drive: Shaft-mounted gear motor 1.10 kW, belt speed: 0.53 m/sec Electrical connection 230/400 V, 50 Hz, IP54 protection class Drive supplied ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte Belt width: 600 mm 2 pcs wave edges 50 mm high, 25 mm wide, high-frequency welded Lodpfxeyhzhzs Aiisrn 42 pcs T-40 cleats, 400 mm long, approx. 401 mm spacing Belt material: 2-ply, highly cross-stable In the bend area, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on both sides. Due to the wave edges, the usable belt width is reduced: Usable width: 300 mm, as follows: (top view) cross section 70+25+5+400+5+25+70 mm Special features: Belt guidance via PVC wedge strip on the running surface profile - 10x6 mm - Including widened substructure for improved stability against top-heaviness - Including cut-out in the discharge sheet - Including sliding guides in drive and return drums - Including magnet-free zone in the area of the overbelt magnet separator - Including bracket for DMPM1200 in the inclined section Discover customized solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailor-made solutions for the recycling, food, and further processing industries. Our comprehensive product portfolio includes everything from conveyor belt systems, flat conveyors, inclined conveyors, and angled conveyors to Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnet separators, drum magnets, and dosing bunkers – all custom-built to our customers' specific requirements. We understand that each industry and project is unique. That is why we individually adapt our solutions to your specifications and requirements. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. For us, there are no special designs – we find the right solution for every challenge! Put us to the test! Contact us and discover how we can transform your requirements into bespoke solutions. Let’s shape the future of your production processes together! Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnet separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grates, metal separator, block magnet, filter systems, dosing hoppers, feed hoppers, filling systems

Condition: excellent (used), CATALOG NUMBER 7611 Technical specifications: - Inlet dimensions: 460x180mm - Outlet diameter: 300mm - Shaft width: 550mm - Shaft diameter: 350mm - Number of knives: 10 pcs - Knives arranged in 2 rows Lsdozbavaspfx Aiiorn - Autoreverse function - Knife setting device - Sieve diameter: 30mm - Feeding conveyor from top and bottom - Bottom pull shaft - Feeding conveyor length: 4400mm - Main motor: 37kW - Upper feed motor: 1.5kW - Lower feed motor: 2.2kW - Dimensions (L/W/H): 6100x1150x1000mm - Weight approx: 3500kg ADVANTAGES – German-made – Autoreverse function – Feeding conveyor from top and bottom – Knife setting device – Very good condition – Used shredder Net price: 98,900 PLN Net price: 23,550 EUR Net price calculated at 4.2 PLN/EUR (Price may change with significant currency fluctuations)

Condition: excellent (used), Year of construction: 2017, CATALOGUE NUMBER 8014 TECHNICAL DATA - inlet width 540mm - inlet height 260mm - roller width 560mm - roller diameter 590mm - number of knives on the roller 4 pcs - feed rollers, geared, top and bottom 2x4kW - screen 40x35mm - electric auto-reverse (adjustable) - reverse gear - vibrating feeder 2.2kW - vibrating feeder length 6000mm - vibrating feeder width 500mm - capacity approximately 12-16 m³/h (depending on the type of material being shredded and the screen opening) - main motor 75kW - automatic hydraulic lifting function for the upper feed roller - overall dimensions of the vibrating feeder 6000x950x1600mm - overall dimensions of the machine L/W/H 3400x1700x2000mm - total weight approximately 6000kg ADVANTAGES - vibrating feed table 6000mm - electric auto-reverse (adjustable) - reverse gear - manufactured by the Polish brand OSKA - electrical diagram, DTR documentation + CE - unpainted - used shredder, very good condition Net price: 179900 PLN Lredpfxeza Tvdj Aiien Net price: 42834 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to higher fluctuations)

Condition: excellent (used), CATALOG NO. 7191 Ledpoza Erdjfx Aiijrn TECHNICAL DATA - loading hopper inlet: 870x735mm - rotor working width: 720mm - main motor: 18.5kW - pump motor: approx. 0.75kW - number of knives: 17 pcs - knife size: 80x40mm - screen: 20mm - pressing drawer - electric auto-reverse - outlet for shredded wood: Ø250mm - dimensions (L/W/H): 2000x1350x1370mm - weight: 1586kg ADVANTAGES – pressing drawer – very good condition – used chipper Net price: 33,900 PLN Net price: 8,070 EUR based on an exchange rate of 4.2 EUR (Prices may vary with larger fluctuations)

Condition: excellent (used), Catalogue number 7291 TECHNICAL DATA - Infeed width: 500mm Lrsdpoza Ek Hefx Aiien - Infeed height: 200mm - Shaft width: 630mm - Knife length: 630mm - Number of knives: 2 pcs - Sieve dimensions: 60x60mm - Lower toothed feed shaft - Lower shaft motor: 4kW - Upper toothed feed shaft - Upper shaft motor: 4kW - Feed belt length: 4100mm - Feed belt width: 400mm - Feeder motor approx. 2kW - Main motor: 55kW - Autoreverse - Feeder dimensions (L/W/H): 4670x760x720mm - Machine dimensions (L/W/H): 2550x1800x1300mm - Weight approx. 4000kg – German-made – Autoreverse – Used chipper, in very good condition Original photos Net price: 118,900 PLN Net price: 28,300 EUR (based on exchange rate of 4.2 EUR) (Prices may vary with significant fluctuations)

Condition: excellent (used), Catalogue number 7687 TECHNICAL DATA - Inlet width: 540 mm - Inlet height: 300 mm - Shaft width: 630 mm - Shaft diameter: 700 mm - Knife length: 630 mm - Number of knives: 2 pcs - Screen size: 40x40 mm - Bottom driven serrated shaft - Lower shaft motor: 4 kW - Top driven serrated shaft - Upper shaft motor: 4 kW Lodpfx Aieza Ei Njiern - Belt feeder - Feeder belt length: 4720 mm - Feeder belt width: 500 mm - Main motor: 75 kW - Autoreverse (adjustable) - Overall machine dimensions (L/W/H): 3100x2000x1830 mm - Overall feeder dimensions (L/W/H): 4800x780x980 mm - Weight: approx. 5000 kg ADVANTAGES – German-made – Autoreverse – Used chipper, in very good condition Net price: 120,900 PLN Net price: 28,780 EUR depending on exchange rate at 4.2 EUR (Prices may vary in case of significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7614 Technical data: - Inlet width: 550 mm - Inlet height: 220 mm - Shaft width: 630 mm - Knife length: 630 mm - Number of knives: 2 pcs - Sieve dimensions: 60x60 mm - 2 lower toothed feed shafts - Lower shaft motor approx. 1.5 kW - Upper toothed feed shaft - Upper shaft motor approx. 1.5 kW - Vibrating chute - Vibrating chute length: 4750 mm Lodpfx Aieza Eipeiern - Vibrating chute width: 450 mm - Main motor: 45 kW - Vibrating chute motor: 1.5 kW - Auto-reverse - Reverse mode - Overall machine dimensions L/W/H: 3200x1700x1400 mm - Overall machine dimensions L/W/H: 4750x800x1100 mm - Weight approx.: 4500 kg ADVANTAGES – Auto-reverse (adjustable) – Reverse mode – Used chipper, in very good condition Net price: 120,900 PLN Net price: 28,780 EUR (depending on the 4.2 EUR exchange rate) (Prices subject to change with significant exchange rate fluctuations)

Condition: new, The price/performance ratio of this model is very good; it is easy to operate, reliable, and inexpensive to maintain. Modern PLC control including control cabinet & cable (5 m) Segmented push floor Screening basket with interchangeable screen Foreign object detection/overload protection Automatic shut-off Potential-free contact CE Motor power: 15.0/18.5/22.0 kW, 400 V, 50 Hz Rotor width: approx. 915 mm Lsdpeza Erkofx Aiisrn Rotor diameter: 325 mm Cutting blades: 40 pcs., (30 x 30 mm) Counter blade: steel, 1 pcs. standard Screen size: 7 - 40 mm (other screen sizes available upon request) Standard size feed hopper 920 x 1220 mm Flange adapter for extraction 200 x 200 mm Dimensions (L x W x H): approx. 2,320 x 1,500 x 1,890 mm Weight: approx. 1,980 kg OPTIONAL: additional row of cutting blades on the rotor second counter blade Cutting blades, screen, counter blade made of special steel Hopper dimensions according to customer requirements Hopper with pneumatically opening lid Note on used machines: • Errors and omissions in technical data and prior sale reserved. • The stated prices are ex-works prices, collection only – free loading! • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machines on site. • Special agreements are only possible in written form. (We will only answer inquiries if you provide your address and telephone number!)

Condition: excellent (used), CATALOG NUMBER 6943 TECHNICAL DATA - loading hopper inlet: 1600x1500mm - rotor working width: 1500mm - main motor: 45kW - pump motor: 5.5kW - number of knives: 44 pcs - knife size: 50x50mm - screen: 59mm - pusher drawer - autoreverse feature - dimensions (L/W/H): 3430x2800x2850mm - weight approx. 9000kg ADVANTAGES Lredpfx Aoza Efqoiijn – French production - New knives installed – Autoreverse – Pusher drawer – Very good condition – Used shredder Net price: 139,900 PLN Net price: 33,300 EUR Net price calculated at the rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number 7268 TECHNICAL DATA - Loading hopper dimensions (top) L/W: 1000x600mm - Loading hopper dimensions (bottom) L/W: 650x600mm - Rotor width: 570mm - Motor: 15kW - Screen: 16x12mm - Knife size: 40x70mm - Number of knives: 18 pcs - Autoreverse - Pressure drawer - Pump motor: 0.75kW - Dimensions L/W/H: 1900x1450x1450mm - Weight: 1040kg ADVANTAGES – German production – Not repainted – Very good condition – Used shredder Lrjdpfxjza Eabs Aiijn Original photos Video of machine start-up: youtube.com/watch?v=fSKMkMPlp-8 Net price: 29,900 PLN Net price: 7,120 EUR (based on rate 4.2 PLN/EUR) (Prices may vary with currency fluctuations)