Used wood shredder for sale (293)

Condition: excellent (used), Year of construction: 1995, Quiet box conveyor belt. Length 7.0 m. Belt width 350 mm. With scraper. 1.5 kW drive. The same belt is also available in a 6.0 m length. Crsdpfxowl Htbj Akcjb Both belts are 3 years old.

Condition: used, Year of construction: 2019, functionality: fully functional, overall weight: 5,500 kg, fuel type: electric, – Manufactured in Poland – Year of manufacture: 2019 – Vibratory feeder Csdpfx Aksyw Sqijcorb TECHNICAL SPECIFICATIONS: – Inlet width: 650 mm – Inlet height: 250 mm – Shaft diameter: 600 mm – Shaft width: 650 mm – Main motor: 110 kW – Number of knives: 2 pcs. – Knife length: 650 mm – 4 lower driven toothed shafts – Lower shafts motor: 4 kW – 3 upper driven toothed shafts – Upper shafts motor: 4 kW – Vibratory feeder length: 5000 mm – Vibratory feeder width: 620 mm – Vibratory feeder motor power: 4 kW – Feed forward / reverse – Screen: 100 x 80 mm – Hydraulic lifting of shafts and cover – Hydraulic pump motor power: 1.1 kW – Transport dimensions (L/W/H): 820 / 180 / 190 cm – Weight: ~5400 kg

Condition: good (used), functionality: fully functional, DRUM CHIPPER BRUKS 602 CS opening size: 540 x 300 mm Drum diameter 600 mm Crsdpfx Akoywgfuecob Motor 26 kwh Capacity 20 m3 of chips/hour. Good condition

Condition: excellent (used), Bruks 602 CS Drum Chipper - Inlet opening size: 540 x 300 mm - Drum diameter: 600 mm - Number of knives: 2 - Maximum wood thickness: 180/100 mm - Main motor power: 26 kW - Fan motor power: 11 kW - Capacity: up to 20 m³ of chips/hour - Standard chip length: 20-35 mm - Net weight: 1400 kg Crodpfx Aksxmbidscsb - Manufacturer: BRUKS (Sweden) Condition: tested, in working condition Conveyors are also available

Condition: excellent (used), Bark shredder HBS 1260 Type: 1260-32-EU / n= 324 Model 1260 Capacity: 75-100 m³/h Power requirement: 110-132 kW RPM: 1045 rpm Weight: 2400 kg Chips, dust, and bark conveyors with bark shredder Chips, dust and bark conveyors (several different ones) Manufacturer Tähkä Codpfx Asxmld Sskcorb Year of purchase 1996-2005

Condition: new, operating hours: 2 h, Special, patented shape of the ROTOR! Crsdpehq T Udofx Akcjb Motor power: 11/ 15/ 18 kW, 400 V, 50 Hz Rotor width: 595 mm Rotor speed: approx. 45 rpm Rotor diameter: 280 mm Sieve: hole size 7 to 30 mm (optionally hardened special steel) Cutting crowns: 34 pieces 25×25 mm (hollow ground, 4-way reversible, hardened special steel) Counter blade: up to 2 pieces (2-way reversible, optionally hardened special steel) Throughput*: up to 2 m3/h (*depending on material) Material feed opening approx.: 600 x 350 mm Solid main bearings compact control cabinet with modern PLC control & 5m cable length Suction diameter: 200 x 200 mm Dimensions L x W x H approx.: 1,050 x 1,180 x 1,890 mm Weight: approx. 900 kg 2000 hour guarantee on the high-performance gearbox

Condition: new, Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) Csdpfx Aegw Sxzskcjrb Power: 18,5 kW Shaft length: 550 mm Shaft diameter: 222 mm Shaft RPM: 120 rpm Number of cutting knives: 14 Granulation: 10-30 mm Capacity: up to 4 m3/h (depending on the wood) Material discharge opening: 160 mm Material: Plastics, cardboard, wood (chipboards, MDF boards, waste,...) Filling opening: 946 x 567 mm Dimensions L/W/H: 1880/1120/1670 mm Weight: approx. 1250 kg 2 years warranty or 2000 working hours Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), functionality: fully functional, We are selling a mobile auger chipper type HP50 from the manufacturer Sasmo/Laimet. It is powered by an 8-cylinder Scania diesel engine. The machine has a tracked chassis. The chipper can chip trunks up to a diameter of 60 cm. Credpfx Ajt Id Ixjkceb

Condition: new, Year of construction: 2026, CORMAK RPL380 Firewood Processor (Saw–Splitter Machine) Key features and functions: Performance: Efficient operation with capacity of up to 8 m³ of wood per hour, depending on wood type. Multifunctionality: Combines a chainsaw, log splitter, and conveyor belt in one machine, increasing efficiency and saving time. Versatility: Suitable for both professionals and individual users; capable of processing various types of wood. Engine: 15 HP petrol engine delivers high power for efficient cutting and splitting. Time-saving: Wood processing time is significantly reduced thanks to the integration of three functions in one unit. Reliability: Designed for use in sawmills, the wood industry, and for firewood or construction wood production. Equipment: Features a STIHL chainsaw guide bar and an oil tank located at the rear of the housing. Precision: Cross wedge enables effective splitting, while cutting can be performed to the desired length. Adjustment: Wedge height can be easily adjusted to match log diameter using a lever. Safety: Built-in safety systems protect the operator. Mobility: Equipped with wheels and a tow hitch for easy transport between work sites. Conveyor system: The belt feeds wood into the splitter and then carries away split logs. It can be folded in half and positioned vertically. Certifications: CE certified and supplied with full technical documentation (DTR). Powerful 24L hydraulic system drives: ✅ Feed conveyor ✅ Cutting saw ✅ Splitting cylinder with up to 20 tons of force ✅ Output conveyor The machine is equipped with a 9-stage adjustable splitting wedge, allowing logs of different diameters to be split into 2 or 4 pieces. ✅ Adjustable cutting length ✅ Log holding clamp ✅ Central chain lubrication system Technical Specifications Engine Model: Lancin G420F Power: 9.0 kW (15 HP) Displacement: 420 cc Fuel: Petrol Fuel tank capacity: 5.4 L Starting system: Electric / manual (recoil) Recommended engine oil: 15W40 (1.7 L) Hydraulic System Hydraulic oil tank capacity: 24 L Recommended hydraulic oil: HL46 / HL32 Performance & Cutting Parameters Max splitting force: 20 t Splitting wedge: 4-way Max log diameter: 380 mm Min / max cutting length: 190–600 mm Chainsaw bar length: 18” (45 cm) Credpfx Akoyw I Epjcjb Capacity: approx. 8 m³/h Feed Conveyor Length / height: 1000 mm / 910 mm Dimensions (L × W): 1040 × 254 mm Max incline angle: 40° Output Conveyor Dimensions (L × W): 3200 × 254 mm Speed: 27 m/min Wheels & Tires Size: 135/70R12 Pressure: 2.5 bar Dimensions & Weight Machine dimensions: 6600 × 1380 × 2000 mm Weight: 680 kg

Condition: new, Year of construction: 2024, Brand New - available immediately Dimensions LR1000 WxHxD 1805 / 2005x1630x1706 mm Rotor diameter 300 mm Shredder chamber opening 1000 x 1050 mm Hopper capacity approx. 1000 L. Drive Drive power 1x30 kW Construction Flexible belt drive, Elastomer shock absorbers Power of the hydraulic aggregate 2.2 kW Rotor speed 96 U / min Gear Bauweise 2-speed oil-bath transmission. Cutting tools Number of knives 54 Pieces Control Cable length. engine - control cabinet 4 m Cabinet dimensions WxHxD 600 / 760x760x210 Requirements for the electrical installation Air temperature + 0ºC to + 40ºC Power Voltage and voltage stability 0.9 - 1.1 of the rated voltage Frequency 0.99 - 1.01 Rated frequency 0.98 1.02 short-term. cos φ = 0.90 - 1.00. Limits for voltage fluctuations - unbalanced, voltage drop and overvoltage In accordance with EN60204-1; 1997 Fuses [A] 1x30 kW: 100 Service space The service space necessary for good machine operation is 700 mm on each side! Lifting equipment Extraction connection Ø 250 mm The minimum speed of sucked air. 28 m / s Additional data weight About 3000 kg Csdoidiyvopfx Akcjrb Noise level (DIN 45635-31): Workplace sound pressure level (LpA, 1m) Acoustics Level (LWA) ca. 82 dB (A) ca. 90 dB (A)

Condition: new, Year of construction: 2024, The LR700 is a single-shaft shredder that was designed for a broad range of applications. Customers appreciate its compact design and universal application opportunities. The tried-and-tested UNTHA cutting system and the powerful, wear-free swivelling pusher ensure the reliable shredding of different types and volumes of wood. The robust machine frame and high-grade components have a particular long service life. Thanks to the compact design, the machine only has a small footprint. The powerful drive system and the high speed of the pusher ensure a high throughput. The homogeneous Cedpfx Akolrvr Ascjrb final product is extremely well suited for use in a wood-chip heating system or for manufacturing wood briquettes. Areas of application » Hard and soft wood » OSB » Chipboard panels » MDF panels » Veneers » Cap pieces » etc. The machine is equipped with one row of knives and an 18.5KW motor. Machine available from stock.

Condition: like new (used), engine power 18.5 kW feed hopper Crjdpeyw Hxzjfx Akcjb press drawer 2 cm screen year 2011 380 V

Condition: ready for operation (used), Year of construction: 1993, power: 30 kW (40.79 HP), Shredder Manufacturer: Piranha For plastics and cables Motor: 37 kW Shaft length: 600 mm With 3 x 5 pcs. cutting knives With 40 mm screen With control unit Dimensions (L/W/H): 2.5 x 2.5 x 2.6 m Weight approx. 4.5 t Crjdpfjyh Narjx Akcjb

Condition: new, Year of construction: 2026, functionality: fully functional, power: 18.5 kW (25.15 HP), overall weight: 1,820 kg, 1 new hopper-type shredder DH 600, 18.5 kW Rotor width: 600 mm Rotor diameter: 220 mm Crsdpfemv Eh Nsx Akcsb Number of knives: 28, concave ground, four-way reversible Motor power: 18.5 kW Electrics: 400V, 50 Hz Control: control cabinet, fan-cooled, Siemens PLC Hopper opening: extended hopper Hopper volume: approx. 0.60 m³ Screen: 20/25 mm or as required Hydraulics: 40-liter tank, external gear pump Dimensions: 1750 x 1280 x 1650 mm Weight: 1820 kg Throughput: 1–3 m³/h, depending on material and screen size Extraction nozzle: 160 mm Extraction capacity: min. 28 m/s

Condition: new, Year of construction: 2023, Capacity: 15 - 70 kg/h Briquette diameter: 60 mm Automatic run: Yes Oil preheating system: Yes Material humidity: max 15% Tank size: octagonal, diameter 750mm Cjdok Utq Depfx Akcerb Hopper height: Dimension: 1500mm x 900mm x 1065mm (L x W x H) Motor power: 5,5 kW Control cabinet: electronically controlled via SPS Weight: 450 kg

Condition: new, Year of construction: 2025, Performance: 40 and 60 kg/h Automatic start: yes Oil cooler: Yes Briquette size: 50 mm diameter Briquette length: 35 mm Container volume: 0.38 m³ Power consumption: 5.5 kW Machine length: 1860 mm Machine width: 890 mm Codpfx Akewhuulecerb Machine height: 1100 mm Weight: 400 kg

Condition: new, Year of construction: 2025, Capacity: 25 and 40 kg/h Credpfx Akjpfatpsceb Briquette size: 50 mm diameter Briquette length: 20 - 40 mm Container size: 0.38 m³ Power consumption: 4 kW Machine length: 1860 mm Machine width: 890 mm Machine height: 1100 mm Weight: 400 kg

Condition: new, Year of construction: 2023, Capacity: 15 - 55 kg/h Briquette diameter: 55 mm Tank size: octagonal, diameter 750mm Hopper height: Dimension: 1500mm x 900mm x 1065mm (L x W x H) Motor power: 4 kW Crjdpfok Utqyex Akcjb Control cabinet: electronically controlled via SPS Weight: 450 kg

Condition: excellent (used), Hammer mill 75kW, about 292 hammers and large grinding chamber. Credoxmu D Ijpfx Akcjb

Condition: excellent (used), Gisiger hammer mill currently GT Zesor AG, high-capacity, model USZ 1250 / 1950 manufactured by 355kW Crjdpfjwcb Tkjx Akcsb Additional sieves and hammers included

Condition: new, Year of construction: 2022, Shredder 630 motor: 18,5 kW; 400 V - 50 Hz - 3 ph knives: 30 pieces concave, multiple rotatable Codpfx Ajku Abiokcjrb rotor diameter: 260 mm Rotor design: EcoRings Control system: PLC Siemens S7-1200 cutter opening 630 x 820 mm filling volume approx. 0,6 qbm screen perforation: 10 - 12 mm Suction nozzle Ø 160 mm

Condition: used, Year of construction: 2017, operating hours: 8,222 h, first registration: 12/2017, We are offering this used UNTHA LR1000 wood shredder, year of manufacture 2017. Title: Shredder Model: LR1000 Serial number: LR106442 Year of manufacture: 11/2017 Crjdpfjyhzwpjx Akcsb Power: 30.0 kW Voltage: 400 V Frequency: 50 Hz If you have any questions or need further information, please send us a message or contact us by phone.

Condition: ready for operation (used), Year of construction: 2007, power: 55 kW (74.78 HP), Fully functional single-shaft wood shredder - currently in operation in our factory. Including electrical control system (PLC), switch cabinet (Rittal/Sarell), anti-vibration foundation and enlarged hopper. Technical data Crsdera Ex Espfx Akceb Rotor working length: 1,500 mm Rotor diameter: 485 mm Motor: 55 KW Rotor speed: 100 RPM Rotor knives: 76 pieces concave / 35x35 mm 4-fold rotating cutting crowns Screen size: 60 mm (new) Weight: approx. 9,000 kg Further details on request. Errors and omissions excepted.

Condition: new, Year of construction: 2023, functionality: unexamined, overall weight: 0 kg, Müteck wood shredder MRZ1530 with 55 kW motor. Brand new, unused Only the shredder is for sale. Cedpfx Akoyt Rriocsrb

Condition: used, Untha LR700 shredder 18.5 kW motor, Codpfx Aksyt Htpscjrb rotor length: 700 mm, 21 knives on the rotor, hydraulic drawer, 15 mm screen, autoreverse, Knives in good condition.