Year of construction: 2003, Condition: used, System 68 IV Number of tools 29 St. Bore 50 mm Gold Window Tools Cobu Howgwmbeg Nksrb IV68 Wood and Wood-Aluminum as well as IV 68 Wood Front Doors Used on a Weinig Unicontrol 6. Complete drawings available, see PDF. (For your information, the drawings also list the molding tools that were used on a Weinig Unimat. These are NOT included in the scope of delivery.) (Technical specifications and drawings according to the manufacturer - no guarantee!)

Condition: good (used), Year of construction: 1990, cut-off saw 3 KW Spindle diameter 40 mm Spindle length 185 mm Crjbu Hgowgi Abo Nkjb

Condition: good (used), Code: 0074 Brand: OMGA Model: CTF 220 - CE Standard Crjbsv Rxlhou Hg Nkjb Automatic bench for reading and cutting 45 degree glass beads for window frames - CE Standard Features: A pneumatic system of measurement and simultaneous positioning of the blades ensures maximum precision when cutting the glass beads In each individual cycle two beads may be be cut at the same time The plane of the CTF table may also be used for other operations (e.g. touching up or grouting the sash or as a sanding table) Technical data: Processing capacity min/max mm 250/2220 Blade diameter mm 150 F 30 Motor power each Kw 1,18 Compressed air 6 bar Overall dimensions mm 3000 x 1840 x 950 h Weight kg 325

Condition: used, Year of construction: 1990, Expert Eda450 Size of table plate 450 mm weight of the machine ca. 380 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Crebu Hef Nlrqog Nkeb +++++

Condition: used, Year of construction: 1985, Weight: approx. 3000 kg Dimensions: approx. 3700 x 2000 x 1600 mm Crjbu Hsvvi Tteg Nkeb Storage location: Supplier

Condition: ready for operation (used), Functionality: fully functional, Used window milling machine, fully functional (still in use, so could be inspected), cross-cutting saw, slotting spindle, profile spindle (see photos), machine individually or with tools (complete window set Leitz IV66 upgraded with sash seal, with and without rain gutter, Profile IV 78 Aigner with and without rain gutter) Cebu Hg Nswgnn Aokjrb

Condition: used, cut-off saw 3 KW Spindle diameter 50 mm Spindle length 300 mm Number of tools variabel St. Control CNC Dimensions (L/W/H) 2500x1700x2100 mm weight 1700 kg HABERKORN - FZS-2 Electronic Slotting Machine with Stepless Slotting Spindles and Automatic Roller Table ----- Crosscut Saw ----- Spindle Positioned at the Top Three-Phase Motor 3 KW Spindle Diameter 30 mm Speed ??2800 rpm Cobu Howgwlkjg Nkorb Saw Blade Diameter 400 mm * Automatic Brake with Speed ??Monitoring * Stepless Saw Positioning with Siko Display * Guard and Extractor Hood with 100 mm Diameter Extractor Nozzle 2 Slotting Spindles 50 mm Diameter ----- Power 2 x 7.5 KW Speed ??4200 rpm Spindle Diameter 50 mm Max. Tool Diameter Approx. 360 mm Usable Length 300 mm * Both slotting spindles can be positioned via ball screw * Freely programmable 19 programs, display with function keys * Protective and extraction hood with 180 mm diameter extraction nozzle * Automatic brake with speed monitoring Studio table ----- * Swivel range +/- 65° * Automatically changing counter wood (programmable) * Pneumatic clamp * High-precision electrical degree indicator * Automatic length compensation * Counter wood at any angle setting in the cutting plane Special features ----- Continuously adjustable roller table feed Laser for workpiece positioning Manual length stop LA 2000 Length 2500 mm Extraction nozzle diameter: 2 x 180 mm for slotting spindles 1 x 100 mm for crosscut saw ----- Price of the above-mentioned machine upon request! ----- Images show the same model. Original images not yet available. (Technical specifications according to the manufacturer - no guarantee!) All prices quoted are net, plus statutory VAT.

Condition: used, Year of construction: 2004, double end profiling machine for the door and windows production working width 4000 mm 3 aggregates on each side 1 x saw 2 x vertical miling aggregate - spindle stroke 800 mm! Csbu Hodfx Hcjg Nkerb long side profiling machine with 16 spindles machine comes with a lot of spare parts! further technical data on demand Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Year of construction: 2019, Workpiece length max: 3.000 mm Workpiece thickness max: 140 mm Number of tenoning spindles: 1 Number of moulding spindles: 2 Drilling aggregate: Yes Seperate fitting groove shaft: Yes Cutting glazing beads: Yes Length of tenoning spindle: 320 mm Crjbu Hovrltnjg Nkjb Length of profiling spindle: 320 mm Spindle diameter: 50 mm Spindle stroke stepless: Yes Radial spindle adjustment: pneumatic Controlled length stop: electronic Atelier window: Yes Mitre difference measure adjustment: Yes Equipped for outer profiling: Yes Splinter protection for outer profiling: Down-cut spindle Workpiece return: Inclined roller conveyor Main motor power: 11 kW Tool clamping system: HSK-85S SCM T-Set: Yes Tool set for window production: IV 54, IV 64, IV 74, IV 84, Holz-Alu Feedrate max: 10 m/min Continuously variable feed: Yes Control: PC control SCM Rotaten: Yes SCM Duo aggregate: Yes Profilsplitting: Yes SCM Jolly: Yes SCM OPTIMA 1: Yes Control: SCM CONTROL 100 PC Conformity marking: CE mark

Condition: excellent (used), Catalog number 7382 TECHNICAL DATA tenting trolley: - electric trolley feed with smooth speed regulation - trolley adjustable at an angle - feed motor 0.46kW - table size L/W 700x450mm with extension up to 1150mm - transverse gear on the trolley - cutting length on the extendable telescope 1860mm - rotating block in the gear - 2 pneumatic clamps saw for cutting to length: - max. blade diameter 380mm - max. cutting height 110mm - blade adjustable up/down, front/back and at an angle - blade guard - saw motor 2.2kW tenting mandrel: - pneumatic mandrel stroke - mandrel adjustment up/down and stroke using knobs - max tool diameter 320mm - spindle diameter 40mm - spindle working height 220mm - spindle lock - 7.5kW motor profiling mandrel: - pneumatic mandrel stroke - mandrel adjustment up/down and stroke using knobs - max tool diameter 200mm - spindle working height 220mm - spindle diameter 54mm - spindle lock - steady rest extendable from the table - 7.5kW motor saw for cutting out glazing bead: - max disc diameter 200mm - disc hole diameter 30mm - adjustable disc front/back, top/bottom - disc cover - 2.2kW motor feed: - number of rollers 8pcs - motor approx. 0.55kW - roll size 110x50mm - 8 types of feed speed 4,6,8,10,12,15,20,30m/min - diameter of the exhaust port 60mm, 2x130mm, 110mm, 100mm - working pressure 6-8 bar - dimensions length/width/height 3600x2100x1600mm, weight about 2500kg ADVANTAGES - for window production - pneumatic mandrel stroke - trolley with electric feed - saw for cutting to length Csbu Hgjtx T Dxe Nksrb - tenoning mandrel - unpainted, used machine, very good condition Net price: PLN 27,900 Net price: EUR 6,560 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: ready for operation (used), Year of construction: 2001, Additional Equipment System design FFAII 1300 includes: Brushing machine DBM (chain brushes) / Thermal oil heater 36 kW / Hardener application machine DAH + complete hardener circulation system with monitoring / Conveyor line + IR zones with temperature sensors / DAK adhesive applicator + automatic level sensing / Cooling unit for DOW cooling / Glue feeder / TKE cone transport line / EKM laminating calender, D = 500 mm + film unwinding station + cutting station + belt transport line with operating bridge for FVE / Expansion shafts / GKL smoothing calender, D = 500 mm at the conveyor belt infeed / 96 kW thermal oil heater for laminating calender and smoothing calender / Central cabinet / I.S.E. Optimat ISL 111 / Bargstedt stacking station This BÜRKLE FFAII 1300 laminating press was manufactured in 2001. Ideal for various laminating applications, it ensures consistent performance and reliability. Consider the opportunity to buy this BÜRKLE FFAII 1300 laminating press. Contact us for more information. Application Types Pressing / Laminating Cobev Nb Hrju Hg Nkorb

Condition: good (used), Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -Dufix: Nr/Var 46616 Cebu Hgjb A Np No Nkerb -Socket: Ø 50 mm -Weight: 6.8 kg

Condition: used, Working width 3500 mm Working height 2550 mm Number of cylinders 6 St. loading dimensions L x W x H 4500x950x2900 mm weight 1800 kg Hess Speedy frame press ----- will be checked Insertion dimension / pressing length max. 3,500 mm Insertion dimension / pressing height max. 2,550 mm Sliding carriage for width adjustment locking in 50 mm Double hole grid system Electric height adjustment of the long-stroke cylinders (hydraulic) Insertion height of the abutment plates can be preselected in 4 positions 3 vertical printing cylinders stroke 1000 mm Pressure force per cylinder 2000 kN / 20000 N Crsbu Hg Nsvnwalokjb 3 horizontal printing cylinders stroke 80 mm Pressure force per cylinder 1250 kN / 12500 N Printing plate depth 100 mm width 140 mm Grid for cylinder fixation/rear bearing 50 mm Medium pressure beam with shut-off valve Final pressure switch-off and pressure control Control and pressing process in touch button operation Adjustable pressing pressure min. 25 – max. 160 bar Electrical connection 2.2 kW / 400V Image and video not original, show identical model ----- (technical data according to the manufacturer - no guarantee!)

Condition: used, Year of construction: 2002, Technical data: Max. workpiece length (measured by stop) 4500 mm. Min. workpiece length (clearance) 200 mm. Max. workpiece height 150 mm Min. workpiece height 30 mm. Max. workpiece width 200 mm. Min. workpiece width 30 mm. Tenoning table feed speed 0-25 m/min. Profiler feed speed 4-20 m/min. Csbjwfg R Teu Hg Nkjrb TEENNING SECTION: Pos. 1 Saw unit: Motor power: 4 kW (5.5 HP) Speed: 3000 rpm. Spindle diameter: 40 mm. Max. saw blade/chipper diameter: 450 mm with arbor hole 80 mm Pos. 2 Penny shaft: Clamping length: 620 mm with shaft diameter 50 mm, equipped with upper bearing. Power: 11 kW (15 HP) Speed: 3500 rpm. Max. tool diameter: 370 mm. Stroke to under the machining table: 575 mm. Equipped with anti-splinter device: model JOLLY Free programming for vertical positioning: Adjustment 1 mtr./min. Pos. 3 Corner rounding unit: Power: 3 kW (4 HP) Speed: 6000 rpm. Shaft dimensions: 130 mm with shaft diameter 40 mm Electronically horizontally positionable. Pos. 3 under Corner rounding unit: Power: 3 kW (4 HP) Speed: 6000 rpm Axis dimension: 130 mm with 40 mm shaft diameter Electronic and vertical horizontal positionable. Free space Pos. 4 Pin shaft: Clamping length: 620 mm with 50 mm shaft diameter, equipped with top bearing Power: 7.5 kW (10 HP) Speed: 3500 rpm Max. tool diameter: 320 mm Stroke to under the machining table: 575 mm Equipped with anti-splinter device: model JOLLY Free programming on vertical positioning: Adjustment 1 mtr./min. MODIFICATIONS: • This machine will be delivered in a special version, which is suitable for processing workpieces up to 4500 mm in length, 150 mm in height (saw blade / chipper diameter 450 mm.) and automatic turning of the workpiece. • When processing lengths up to 3200 mm, it is possible to process 2 workpieces simultaneously, but for lengths from 3200 to 4500 mm, only 1 workpiece can be processed (automatically). • The machine is equipped with "ROTATEN" for the first and second pin axis. (CNC interpolation of the X and Y axis of the pin table). This is for the production of beveled connections from -60º to +60º • The corner rounding units cannot be used in combination with "Rotates". • Interpolating movement "Rotates" for 2 pin aggregates. - Device for automatic machining of bevel joints with -/+ 60°. - Motor power of both pin units 11 kW (15 HP). - Max. tool diameter for both pin units 370 mm. - Hardware and software adjustments. PROFILE SECTION: Pos. 6 (right) Profile spindle Spindle dimensions: 620 x 50 mm Motor power: 11.5 kW (15 HP) Speed: 6000 rpm. Min./max. tool diameter: 130-250 mm Vertical movement: 575 mm Vertical CNC-controlled axis: 1 m/min Horizontal CNC-controlled axis: 1 m/min Pos. 7 (right) Profile spindle Shaft dimensions: 620 x 50 mm Motor power: 11.5 kW (15 HP) Speed: 6000 rpm Min./max. tool diameter: 130-250 mm Vertical movement: 575 mm Vertical CNC-controlled axis: 1 m/min Horizontal CNC-controlled axis: 1 m/min Pos. 8 (right) Profile spindle Shaft dimensions: 620 x 50 mm Motor power: 11.5 kW (15 HP) Speed: 6000 rpm TOOLING INCLUDED! MORE INFORMATION ON REQUEST!

Condition: excellent (used), Year of construction: 1980, REX Tenoning and Slotting Machine Type: ZS-400, Year 1980 Machine No. 18.943 Very good condition 380 Volt / 50 Hz Saw unit Mill unit Sliding table Length stop Crobu Hg Nowctu Hskjb Holder Location: From stock, 54634 Bitburg - Available immediately -

Condition: excellent (used), CATALOGUE NUMBER 5503 TECHNICAL DATA - 2.2kW engine - 380V power supply - dimensions length/width/height 1870x1050x1220mm - weight 846kg Machine equipped with: - 2 tables with angles measuring 380x330mm - pneumatic clamps Crebod Snfgsu Hg Nksb - tables adjustable angularly in two planes - tables allow for making long and round tenons - tables adjustable up/down - tenon width adjustment - central lubrication - unpainted - Italian production - two stations - pneumatic - solid machine Net price: PLN 18900 Net price: EUR 4450 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of greater exchange rate fluctuations the price may change)

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 16480, working width: 230 mm, planing height: 125 mm, jointer table length: 2,000 mm, spindle diameter: 40 mm, power of feed motor: 1,300 W, overall weight: 1,600 kg, total length: 3,225 mm, total height: 1,515 mm, intake manifold diameter: 120 mm, number of spindles: 4, shaft speed: 6,000 rpm, total depth: 1,500 mm, The machine was rarely used, serviced by a branded service In excellent technical condition The machine is equipped with planing razor rollers Motor power lower horizontal spindle 4 kW Motor power upper horizontal spindle 4 kW Motor power left and right vertical spindle 5.5 kW Tool diameter MIN 100mm - MAX 180mm Cjbu Hg Nswd E Uzjkjrb Feed speed 4 - 22 m/s Additional table lubrication Can be tested on site

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, Pen machine - saw group * saw diameter 500 mm * max. cutting width 200 mm * 2.2 kW motor - horizontal milling head above * tool diameter 200 mm * max pin length 150 mm * motor 2.2 kW - horizontal milling head bottom * diameter of the tool 200 mm * max. tenon length 150 mm * 2.2 kW motor - milling spindle * diameter of spindle 50 mm * max tool diameter 350 mm * length of spindle 180 mm Crebu Hg Newdw Hiskob * 5.5 kW motor - swiveling table +/- 60° - pneumatic pusher - stop bar max. 3000 mm - counter profile rotatable - Swinging of the stop bar +/- 45°

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm control Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and completely checked before delivery Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Electronic cross-cut saw, infinitely adjustable horizontally > Number of tools: 1 piece > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser aiming light for detecting the saw section > NC length stop, mounted on slot table included Positioning of the cross-cut saw integrated in the control system. > Length 3500 mm Cebu Hjvu Hfqjg Nkerb Item 2: tenoning spindle ----- > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (synchronous spindle and counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool flight circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Rung guide consisting of: Guide ruler in the stop (area of ??synchronous spindle), Rung support bar from above in the area of ??profile milling unit vertical right and profiling spindle. Pos. 5: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??5,850 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions using pneumatic turret > Radial adjustment range 125 mm, 8 positions using pneumatic turret Pos. 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions using pneumatic turret > Radial adjustment range 100 mm, 8 positions using pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool flight circle: 210 mm > Motor power: 3.0 kW Other features ----- > online-capable > rebating device for tear-free rebating > double parts package > return conveyor for 1-man operation: slat conveyor > screen control > inclined window device > electronic angle display for inclined windows > industrial PC, PC control/NEXUS > Weinig type production program > without processing tools No original images available yet. Images show identical machines from our archive. ----- Price of the above-mentioned machine upon request! ----- Optional with additional charge: Note on used tools: We currently have used Gold...

Condition: excellent (used), Year of construction: 1992, beautiful machine in good condition as it came from a small business with little use. with IV 68 tool is still in operation ready for demonstration Crjbu Hg Nju S Afcjkjb

Condition: used, Year of construction: 1994, Used machine Year of construction: 1994 Technical data: Crosscut saw: largest tool diameter: 300 mm shaft diameter: 30 mm Motor: 1.5 kW Speed: approx. 3000 rpm Crebujriiruo Hg Nkjb Cutting thickness: 125 mm Cutting width: 900 mm with Festo-LAS stop profile Milling arbor: Milling arbor diameter: 40 mm Height: 150 mm Largest tool diameter: 420 mm Motor: 5.5 kW Speed: 3000 rpm Largest tenon length: 170 mm Dimensions: 1650x1600x1500 mm Weight: 550 kg Availability: short term Location: Hochheim Hochheim

Condition: like new (used), Year of construction: 2018, Functionality: fully functional, Pen machine - inclinable guide +/- 45° Cjbuswdw Ers Hg Nkerb - 2 pneumatic pushers - saw * 3 kW motor power * saw blade diam. 400 mm - pin heads * motor strength 2.2 kW * diam. heads 160 mm * heads length 150 mm * max. opening 185 mm - toupie * shaft length 190 mm * shaft diam. 50 mm * motor strength 5.5 kW * max tool diam. 320 mm

Condition: used, Tenoning spindle 1 St Number of milling agregates 3 St. Spindle diameter 50 mm Gubisch type EST-H 2000/2 ----- !Machine still in use and can be viewed! Including Aigner tools built 2010: IV68/78/88 wood-wood-aluminum Eurofold + 4mm rebate clearance Manufacturer description: ----- one-sided angle combination for window and door production consisting of tenoning and slotting machine, angle transfer and milling machine Crosscut saw: ----- P = 3 kW U = 3000-1 Saw diameter: 400 mm Flange diameter: 80 mm Adjustment: horizontal: man. adjustable, readable from mechanical digital display Adjustment range: 0-120 mm Length stop LAS ----- Adjustment: manual Length: extended to 3.2 m Crobu Hjv Dmqrog Nkob Slotting unit (cross machining) ----- P = 9.2 kW U = max. 4500 depends on your tools and is adjusted accordingly Clamping height: 300 mm Useful height: 300 mm Shaft diameter: 50 mm Largest tool diameter: 400 mm max., 240 mm min. Adjustment: vertical Adjustment range: vertical 210 mm under table Number of tools: 3 tool sets of 100 mm each provided by customer 0-height 10 mm Shortest workpiece: 320 mm + tenon Narrowest workpiece: 48 mm Widest workpiece: 170 mm 1. Profile spindle ----- Position of the spindle: vertical right Function: profile production and automatic synchronous immersion P = 9.2 kW U = 6000 rpm Clamping height: 100 mm Useful height: 100 mm Diameter: 50 mm Flight circle diameter: 100 - 240 mm Adjustment range: horizontal 70 mm, tool 0-height 10 mm Number of tools: 1 a 100 mm clamping length max. 2. Profile spindle ----- Position of the spindle: vertical right Function: profile production P = 9.2 kW U = 6000 rpm Clamping height: 300 mm Useful height: 300 mm Diameter: 50 mm Flight circle diameter: 100 - 240 mm Adjustment range: horizontal 70 mm, vertical 100 mm for tool 0-height 10 mm Number of tools: 3 at 100 mm clamping length max. 3. Profile spindle ----- Position of spindle: vertical right Function: profile production P = 9.2 kW U = 6000 rpm Clamping height: 300 mm Useful height: 300 mm Diameter: 50 mm Cutting circle diameter: 100 - 240 mm Adjustment range: horizontal 70 mm, vertical 100 mm for tool 0-height 10 mm Number of tools: 3 at 100 mm clamping length max. 4. Profile spindle (glass bead saw unit) ----- Position of spindle: horizontal top, right P = 3.0 kW U = 3000 rpm Cutting circle diameter: 250 mm Clamping flange mount: 60 mm diameter Hydraulic adjustment: automatic up/down, forward/backward for 1 Basic height and 1 basic depth Other technical details ----- Clamping table slot unit ----- On ball guide bushing and roller guides Manual swivel range: 60 degrees in both directions Speeds: 0 - 28 m/min. continuously adjustable 4 speed ranges fast feed in front of slot unit slow feed in cutting area adjustable fast feed for transfer fast return Counter wood: counter wood changes automatically with spindle stroke Transfer type in profile area: occurs automatically Operating mode: individual part production, frame by frame Production and series production possible Longitudinal profiling -----...

Condition: good (used), Year of construction: 1995, Angle unit for window production , consisting of : Slotting unit for 8 tools with hydraulic stroke 75 mm (clamping height 600 mm) Crsbuotqft Ie Hg Nkeb Milling unit for 4 tools with hydraulic stroke 80 mm (clamping height 320 mm) with return with IV 68 tools

Condition: used, Year of construction: 1989, Used machine Year of construction 1989 Technical data: Crsbuju Tyv Is Hg Nksb Length of the dressing table 2100 mm Diameter of the tool spindle 30 mm Diameter of the planing heads 100 mm Speed of the planing shafts 6000 rpm Working width: 30 - 180mm Working height: 6 - 120mm with optionally available smaller planing head for the left shaft plus narrower feed rollers, a minimum width of 15 mm can be achieved Motor power bottom, left, right: 3.7kW each Motor power top (thicknessing shaft): 5.5kW Feed speed: 6 and 12 m/min Electric height adjustment with 1/10 inching control Incl. planing heads 160/120/120/140 mm extraction socket Availability: by arrangement Storage location: Flörsheim