Used welding smoke suction for sale (146)

Condition: good (used), Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, welding fume extractors -Welding fume extraction: welding fume extraction arm Fodsztwgrspfx Akvjgf -Extraction arm: Ø 200 mm x 4700 mm -Transport dimensions: 2490/800/H290 mm -Weight: 31 kg

Condition: used, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, overall weight: 1,695 kg, input voltage: 400 V, total width: 3,405 mm, total length: 3,900 mm, total height: 1,310 mm, volume flow: 29,000 m³/h, space requirement height: 1,310 mm, space requirement width: 3,405 mm, space requirement length: 3,900 mm, filter area: 540 m², suction capacity: 29,000 m³/h, compressed air connection: 4 bar, power: 45 kW (61.18 HP), input frequency: 50 Hz, transport length: 3,900 mm, transport width: 3,405 mm, Plymovent MDB-36 PRO central extraction system for welding fume and dust extraction. Year of manufacture: 2022, used. For sale is a complete central extraction system consisting of a filter unit, fan, frequency converter, piping system, extraction arms, spark arrestors, shut-off dampers, sensors and other accessories. The system will be sold as a complete package according to the scope of the offer. Technical data: - Manufacturer: Plymovent - Type: MDB-36 PRO - Year of manufacture: 2022 - Filter area: 540 m² - Extraction volume flow: approx. 29,000 m³/h - Fan power: 45 kW - Weight: approx. 1,695 kg - Dimensions: approx. 3,900 x 3,405 x 1,310 mm - Filter cartridges cleaned with compressed air - Frequency converter included Scope of supply: - MDB-36 PRO filter unit - 36 filter cartridges CART-PTFE/15 - 45 kW fan in soundproofing box - Frequency converter VFD-45 Fgedpfxoztmw To Akvef - Pressure sensor PT-2500 - 2 x SparkShield-500 spark arrestors - Piping system - 7 x KUA-160/4H extraction arms - ERC-5.8 extraction rail with support consoles - Automatic shut-off dampers - Switching devices and sensors - Exhaust/recirculation switchover - Louvre silencer - Other accessories according to the scope of the offer Inspection possible by appointment. The system is sold in its current condition. The system was used for the extraction of welding fumes and grinding dust and is sold as a complete unit. Collection of the system by the buyer is highly desirable. Sale in current condition. Note: The system is currently disassembled and not connected. Before being taken out of service, the system operated perfectly and without any known functional faults. An inspection is of course possible, but a demonstration under power cannot be carried out at present. The system was used for the extraction of welding fumes and grinding dust and is sold as a complete unit. Collection of the system by the buyer is highly desirable. The information on documentation and certification, operating hours and machine/vehicle number will be supplemented and provided later. If you have any questions or are interested, please send us a message. We will gladly provide further information and additional pictures upon request.

Condition: used, Year of construction: 2009, filter area: 80 m², suction capacity: 8,000 m³/h, DANTHERM dust extractor, welding fume extraction, automatic self-cleaning cartridge filter, pneumatic, vacuum type for plasma cutting, laser, sandblasting, soda blasting, shot blasting, plastics and catalytic converters, mineral processes, and all types of dry dust. The filter is cleaned pneumatically with compressed air pulses during operation, ensuring high device efficiency. The fan is located on the clean air side, minimizing explosion risk. Fan power: 11 kW with frequency inverter. Airflow capacity: 8,000 m³/h – 10,000 m³/h Filtration surface area: 80 m² Inlet diameter: 250 mm Stock no.: 1090 Fsdpfx Aoyq Nygekvegf

Condition: used, functionality: fully functional, type of input current: three-phase, filter area: 150 m², suction capacity: 9,000 m³/h, Dust extraction, welding fume extraction, self-cleaning cartridge filter, pneumatic and vacuum-operated, suitable for plasma cutting, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. The filter is cleaned pneumatically by compressed air pulses during operation, ensuring high device efficiency. The fan is located on the clean air side, which reduces explosion risk to a minimum. Fgsdoy H Hkvjpfx Akvof Brand: Plymovent / Euromate Model: SCS Cartridge filter elements – 2 pcs Filtration area: 150 m² Fan enclosed in a soundproof casing with noise silencer, power 7.5 kW. Fan model: CHB16LG03 Capacity up to 9,000 m³/h Inlet diameter: 400 mm Filtration efficiency: 99.8%

Condition: good (used), Year of construction: 2008, Welding fume extraction system / Kemper – used: Fgodpezp Rw Nsfx Akvsf Price ex works: €750.00 (net)! Manufacturer: Kemper Type: EFF 86100 Year of manufacture: 2008 Machine number: 208245 Volume flow rate: 1,200 m³/h Max. static pressure: 1,350 Pa 230V, 7.6A, 1.1kW, control voltage: 24V High voltage: ionizer: 11.5 kV / collector: 5.8 kV IP 54 Weight approx. 105 kg Condition: good Available: immediately Location: Leipzig

Condition: used, Year of construction: 2012, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, filter area: 100 m², suction capacity: 8,000 m³/h, negative pressure: 3,000 Pa, input frequency: 50 Hz, Equipment: type plate available, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. Brand: TEKA Model: Filtercube 4H Year of manufacture: 2012 The filter is cleaned by a microprocessor controller with pulses of compressed air during operation, resulting in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. The central Filtercube filter ventilation unit, equipped with cartridge filters, is an ideal solution for almost all problems in the field of fume and dust filtration. The fan is located on the clean side, which minimizes the risk of explosion. The Filtercube production series is certified by a German institute according to DIN EN ISO 15012-1 and approved for welding class W3 as a stationary welding fume extraction unit. Applications: central extraction system for multiple welding stations Fedpfx Akjzp H Nbsvjgf extraction system for welding robots extraction system for thermal cutting and grinding tables system for general ventilation of a hall (push-pull system, buoyancy system) extraction system in combination with an extraction table extraction system for grinding non-explosive materials Parameters: *Fan in a soundproof housing with a power of 11 kW. *Capacity 8000 m3/h *Vacuum max 3000 Pa *Filtration area 100 m2 *Built-in frequency converter. *Control cabinet with electrical documentation *Includes a TEKA FVS7000-12000 water-based spark trap. *New filter cartridges Warehouse number: 1154

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, suction capacity: 1,100 m³/h, negative pressure: 3,200 Pa, Welding fume extractor, dust extraction unit, self-cleaning, pneumatic, vacuum type by KEMPER. Suitable for welding, grinding, and all types of dry dust. Self-cleaning welding fume filter with contamination-free dust collection. The mobile KEMPER MaxiFil Clean cartridge filter is designed for continuous operation, suitable for high-concentration welding fumes and dust filtration. Appropriate for all welding methods with carbon steel, low-alloy and high-alloy steel, as well as aluminium. Cost-effective operation thanks to the long service life of the filter cartridge. Due to IFA-W3 certification, the basic version of the filter can be used for welding high-alloy steels. Specifications: Airflow capacity: 1,100 m³/h Maximum negative pressure: 3,200 Pa Three-phase fan motor: 1.5 kW Fgjdpfetq E Sisx Akvsf Filter surface area: 15 m² Year of manufacture: 12/2023 Cartridge filter element with PTFE membrane Filtration efficiency: > 99.97% Built-in delay time controller for start-stop operation. With the optional start-stop sensor connected, the extraction delay after welding can be set between 5 to 60 seconds. Stock no.: 1071

Condition: used, functionality: fully functional, type of input current: three-phase, filter area: 20 m², suction capacity: 3,500 m³/h, negative pressure: 3,000 Pa, Mobile welding fume extractor, dust extraction unit, self-cleaning pneumatic vacuum filter TEKA. Model: TK-PF Mobile filtration and ventilation unit. Suitable for welding, grinding, and all types of dry dust. The filter is cleaned pneumatically by compressed air pulses during operation, ensuring high efficiency. Fan power: 1.1 kW – three-phase Max. capacity – 3500 m3/h Max. negative pressure – 3000 Pa 2 extraction arms, each 4.00 m long. Stock no. – 1106 Fgodpfxoy Hq Rto Akvsf

Condition: excellent (used), Year of construction: 2022, Description *EUROMATE 4300C DUST EXTRACTION UNIT - WELDING/GRINDING FILTRATION - 1.1 kW* *DESCRIPTION* Mobile EUROMATE 4300C dust extraction unit, model 2022. Dutch professional brand specializing in welding fume extraction. Ideal for source capture on MIG/TIG welding stations, grinding, and fine dust. Replaces an extraction arm or complements a workshop. *TECHNICAL SPECIFICATIONS* Feature Detail Brand / Model EUROMATE 4300C Year 2022 Airflow ~1250 m³/h Vacuum ~2000 Pa Power 1.1 kW Power supply 230V Single-phase Filtration Cartridge + metal pre-filter Filter area 20 m² Sound level ~72 dB(A) Dimensions W 700 x D 750 x H 1100 mm approx. Weight ~95 kg *GENERAL CONDITION* Few hours of operation. Main cartridge and pre-filter in place. Wheels and handle: easy handling. *KEY BENEFITS* 1. *230V Single-phase*: Plugs into a standard 16A domestic socket. 3. *Mobile*: Braked wheels, fits through all workshop doors. 4. *EUROMATE*: Professional brand, readily available after-sales service and filters. *INCLUDED* Complete unit with cartridge and pre-filter in place. Without extraction arm, without hose. Standard Ø160 mm outlet. *LOCATION & CONTACT* Available for viewing in the 49 postcode area, 49000. Easy loading by one person: 95 kg on wheels. Fjdpfx Akjzaivgevegf

Condition: used, Year of construction: 2008, functionality: fully functional, type of input current: three-phase, overall weight: 1,200 kg, input voltage: 400 V, total width: 1,050 mm, total length: 1,920 mm, total height: 2,160 mm, filter area: 23.75 m², suction capacity: 1,500 m³/h, Equipment: type plate available, HERDING brand dust extraction and welding fume extraction system. Self-cleaning filter, pneumatic, suitable for plasma, laser, abrasive blasting, grinding gypsum, cement, plastics, and all types of dry dust. The filter is pneumatically cleaned with pulses of compressed air during operation, ensuring high device efficiency. Highly efficient Jet-Pulse cleaning system with low compressed air consumption. Model: Delta Comp 1500-5/9 SB Fan power: 5.5 kW Capacity: 1500 m3/h Filtration area: 23.75 m2 Inlet diameter: 150 mm Fodpezpxdksfx Akvsgf Height: 2.16 m Width: 1.05 m Depth: 1.92 m Weight: 1200 kg Stock number: 1158

Condition: used, type of input current: three-phase, filter area: 40 m², suction capacity: 4,000 m³/h, negative pressure: 2,500 Pa, Welding fume extractor, dust extraction unit, self-cleaning filter, pneumatic, vacuum type by TEKA. Suitable for welding, grinding, sandblasting, and all types of dry dust. Cartridge filter elements. The filter is cleaned pneumatically with compressed air pulses during operation, ensuring high device efficiency. Fan power: 4 kW Fgsdpfjy Hhd Djx Akvjf Capacity: 4000 m3/h Vacuum: 2500 Pa Filtration surface: 40 m2 Inlet diameter: 315 mm Device dimensions: Height - 2.50 m Width - 1.25 m Depth - 0.97 m Stock no. - 1116

Condition: like new (used), Year of construction: 2017, volume capacity 1450 m³/h Fgedpjy Hxqzsfx Akvof 3000 mm tube diameter 160 mm total power requirement 0,75 kW weight of the machine ca. 110 kg dimensions of the machine ca. 675 x 905 x 939 mm

Condition: used, Year of construction: 2012, functionality: fully functional, type of input current: three-phase, overall weight: 800 kg, input voltage: 400 V, filter area: 84 m², suction capacity: 4,000 m³/h, Welding fume extraction unit, dust collector, self-cleaning filter, pneumatic, vacuum-type, manufactured by Donaldson Torit. Suitable for welding, grinding, sandblasting, and all types of dry dust. Cartridge-type filter elements. The filter is cleaned pneumatically with pulses of compressed air during operation, resulting in high device efficiency. Brand: Donaldson Torit Model: 2DFP4-SPRK Year of manufacture: 2012 Fan power: 5.5 kW Capacity: 4000 m3/h Filtration area: 84 m2 Filter elements: Donaldson Ultra WEB Inlet diameter: 200 mm Equipped with a "SparkTrap" spark arrestor system Dimensions: Width: 1.40m x 1.44m Height: 3.00m Fgjdpfxozm Ux So Akvof Stock number: 1150

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, overall weight: 1,250 kg, input voltage: 400 V, total width: 1,515 mm, total length: 2,060 mm, total height: 3,310 mm, volume flow: 15,000 m³/h, noise level: 77 dB, filter area: 160 m², suction capacity: 15,000 m³/h, negative pressure: 2,800 Pa, ESTA FILTOWER F-160 W3 Filter Ventilation Tower Industrial filter ventilation for welding halls – suitable for a variety of technological processes in manufacturing facilities. Application area: dust extraction, dry, granular material Top suction and draft-free bottom discharge – precisely at the work areas. Layered filter ventilation principle; no ductwork installation required. Cartridge filter elements – self-cleaning via compressed air pulses during operation. Filter cleaning based on differential pressure – no compressed air losses. Layered ventilation principle: contaminated air is extracted from above, filtered, and then released at floor level as clean, breathable air, without generating drafts. Precisely where workers breathe. Year of manufacture: 2016 Technical specifications: - Motor: 2 x 4.0 kW - Max. air flow rate: 15,000 m³/h - Max. negative pressure: 2,800 Pa - Sound pressure level: 77 dB(A) - Number of filters: 4 - Filter surface area: 160 m² - Dimensions (L/W/H): 2,060 x 1,515 x 3,310 mm - Weight: approx. 1,250 kg Stock no.: 1127 Fgsdpfx Akjy D Nhfovsf

Condition: used, Year of construction: 2002, functionality: fully functional, type of input current: three-phase, overall weight: 1,700 kg, filter area: 286 m², suction capacity: 10,000 m³/h, Dust extractor, welding fume extractor, self-cleaning pneumatic vacuum filter for continuous operation by renowned brand Donaldson Torit. Suitable for plasma, laser, sandblasting, soda blasting, welding and all types of dry dusts. The fan is installed after the filter on the clean air side, which minimizes explosion risks. Ultra Web filter cartridges are cleaned pneumatically with compressed air pulses during operation, ensuring high efficiency of the unit. Model – DF+12 SPKTRP Fan power: 11 kW Capacity up to 10,000 m3/h Connection diameter: 315 mm 12 filter cartridges Filter area: 286.8 m2 Fedjy D Scljpfx Akvsgf Year of manufacture: 2002 Equipped with "SparkTrap" spark arrestor system Stock number: 1121

Condition: excellent (used), Year of construction: 2021, operating hours: 22,000 h, functionality: fully functional, type of input current: three-phase, overall weight: 1,300 kg, input voltage: 400 V, total width: 1,700 mm, total length: 2,050 mm, total height: 3,300 mm, filter area: 106 m², suction capacity: 5,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction unit, fume extraction for welding, self-cleaning cartridge filter, pneumatic, vacuum-based, for plasma, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. The filter is cleaned pneumatically with pulses of compressed air during operation, resulting in high device efficiency. The fan is located on the clean side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Model: DFPRO 6 - SPRK-R / W3 Year of manufacture: 2021 The unit is in the "R" version – reinforced construction with additional grounding. Filtration area: 106 m2 Fan power: 5.5 kW Capacity: 5000 m3/h Inlet diameter: 215 mm Equipped with an EX ATEX check valve and a Hoerbiger explosion relief valve. Dimensions: Fgjdpfozl Sv Eox Akvjf Height: 3.30 m Width: 2.05 m x 1.70 m Base: 1.50 m x 1.10 m Weight: 1300 kg Stock number: 1156

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: three-phase, overall weight: 1,100 kg, input voltage: 400 V, total width: 1,650 mm, total length: 2,000 mm, total height: 4,000 mm, filter area: 140 m², suction capacity: 3,800 m³/h, negative pressure: 3,500 Pa, Dust extraction unit, fume extraction for welding, self-cleaning filter, suitable for plasma cutting, laser cutting, sandblasting, shot blasting, and all types of dry dust. The filter is pneumatically cleaned with compressed air pulses during operation, resulting in high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Year of manufacture: 2003 Motor power: 7.5 kW Capacity: 3800 m3/h Fgjdpfxozlzv Ij Akvsf Inlet diameter: 280 mm Filter cartridges: 9 pcs. Filtration area: 140 m2 Fire damper Noise silencer Dimensions: Height: 4.00 m Width: 1.65 m Depth: 2.00 m Base: 1.33 m x 1.84 m Stock number: 1148

Condition: used, Year of construction: 1995, PlymoVent EMK-1602 Weld Fume Extractor with Flexi Arm. S/No. 4715-1041-2 (1995) Fsdpfx Akjzn Uxhevsgf Location: These lots are located in Cardiff, Wales, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, type of input current: three-phase, volume flow: 9,900 m³/h, power: 11 kW (14.96 HP), Füchtenkötter dust extraction system for sale. Comes with various accessories, including piping and automatic control for self-cleaning. The system has 2 suction inlets and one outlet for the filtered air. Fgodpjzn Uk Defx Akvjf I acquired 2 systems from an insolvency auction. One system will be used for my own purposes. The other system is for sale. The condition of the systems is excellent. Dimensions: approximately 4 x 2.5 x 3 m.

Condition: used, Welding Fumes Extractor CAPTAIR Year of construction: 1995 Voltage: 380 V Tubing Length: 3000 mm Width: 600 mm Depth: 500 mm Total height: 1300 mm Fgsdpfxozn Hlge Akvef

Condition: used, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, suction capacity: 1,000 m³/h, negative pressure: 3,000 Pa, Welding fume extraction, dust extraction, self-cleaning filter, pneumatic, vacuum-based KEMPER. For welding, grinding, sandblasting and all types of dry dust. The filter is pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. Device for wall mounting. Fan power: 1.5 kW Fedpfezlqkhex Akvsgf Flow rate: 1000 m3/h Maximum vacuum: 3000 Pa Extraction arm length: 3.00 m Stock number: 0391

Condition: new, Year of construction: 2026, CORMAK OS3500 is a mobile welding fume extractor designed for effective removal of welding fumes and exhaust gases directly at the source. The unit combines high suction power with a large airflow rate, while the sound-insulated fan chamber ensures quiet, smooth operation. Additional advantages include an integrated pneumatic filter cleaning system, airflow regulation at the suction inlet, and a robust, industrial-grade construction. Automatic Filter Cleaning – Consistent Performance The CORMAK OS3500 is designed with user convenience and long-term performance stability in mind. For this reason, it is equipped with an automatic pneumatic filter cleaning system. In practice, this means that accumulated contaminants are regularly knocked off the filter without the need for frequent manual intervention. The result is twofold: first, the extractor maintains a constant level of efficiency; second, service downtime and operating costs are reduced. In a production environment, this is crucial—any unplanned interruption or loss of suction affects workflow and the quality of working conditions at the workstation. Adjustable Suction Power Tailored to the Task Another key advantage is airflow regulation at the suction inlet. This solution allows the extraction force to be adjusted to actual working needs: different for short spot welds, different for long continuous welding, and different again for grinding operations. Regulation at the inlet enables quick, operator-friendly adjustment without time-consuming configuration changes. This makes it easier to maintain a balance between effective extraction and operator comfort (for example, when working with smaller parts where excessive suction could hinder handling). Robust Construction and Mobility The OS3500 is designed for everyday use, which is why great emphasis has been placed on build quality. Its solid construction performs reliably in workshop and industrial environments—where equipment is frequently moved, operates for many hours a day, and must withstand intensive use. Its mobility allows the extractor to be used at multiple workstations without investing in a permanent installation throughout the entire hall. This is a practical solution for both companies with several workstations and those that frequently change layouts or carry out varied jobs. Fgjdpfx Aksygt Utjvsf Wide Range of Applications In practice, the OS3500 is suitable wherever air contaminants are generated: welding (MIG/MAG, TIG), metalworking, grinding, and other processes producing dust and fumes. Its purpose is to improve working conditions by reducing pollutants in the operator’s breathing zone. This solution positively impacts employee health, work comfort, and the perception of the facility as a modern and safe workplace. Technical Specifications Model Airflow (m³/h) Pressure (Pa) Filter Efficiency (%) Power (kW) Voltage (V) Weight (kg) OS2400 2400 2000 99.9 2.2 400 80 OS3500 3500 2000 99.9 3.0 400 122 *The power cable and plug are not included due to varying connection infrastructures and customer requirements.

Condition: new, Year of construction: 2026, CORMAK OS-4000M Mobile Welding Fume Extractor The CORMAK OS-4000M is an industrial mobile welding fume extractor designed for effective removal of welding fumes, dust, and fine contaminants generated during welding and related processes. The OS4000S features a new, lower-profile housing. The unit operates locally at the workstation, capturing contaminants before they spread throughout the workshop or production hall. This significantly improves working comfort, visibility in the welding area, and helps maintain workplace health and safety standards. Specifications Parameter Value Model OS4000M Power Supply 400 V Power 4.0 kW Airflow Capacity 3000–4000 m³/h Operating Pressure 3050–2600 Pa Filtration Efficiency 99.00% Number of Filter Cartridges 4 pcs Filter Specification Ø325 × 600 mm Filter Material Polyester Filter Cleaning Method Pneumatic, pulse cleaning Dust Container Capacity 50 l Fgodpfjy Sgbrjx Akvjf Noise Level ≤ 78 dB(A) Dimensions 900 × 900 × 2300 mm Why Choose the OS-4000M? High extraction performance – effective suction of fumes and dust near the welding arc. Large-surface cartridge filtration system – highly efficient separation of fine particles. Automatic pneumatic filter cleaning – stable operation with fewer maintenance interruptions. Mobile construction – easy movement between workstations (workshop/production). Dust collection container – fast and convenient emptying without mess. Easy operation – user-friendly controls and quick access to consumable components. Effective Filtration and Consistent Suction Power The OS-4000M uses a multi-stage filtration system based on cartridge filters. This allows the unit to efficiently capture fine dust and welding fume particles. Additionally, the pneumatic pulse cleaning system shakes dust off the filter surfaces, which: maintains constant suction efficiency, extends filter service life, reduces performance loss during intensive operation. Comfort and Safety at the Workstation Extracting contaminants directly at the source provides immediate benefits: less smoke in the operator’s working zone, improved weld visibility and more stable working conditions, cleaner workshop environment and reduced dust accumulation on machines and installations. Applications The CORMAK OS-4000M is suitable for: MIG/MAG, TIG, and MMA welding, metalworking and maintenance operations in production facilities, grinding and deburring near the workstation, light cutting and processing operations that generate dust and fumes.

Condition: new, Year of construction: 2026, CORMAK OS-4000S Welding Fume Extractor The CORMAK OS-4000S is an industrial welding fume extractor designed for effective removal of welding fumes, dust, and fine contaminants generated during welding and related operations. The OS4000S features a new, lower-profile housing. The unit operates locally at the workstation, capturing contaminants before they spread throughout the workshop or production hall. This significantly improves working comfort, visibility in the welding area, and helps maintain workplace health and safety standards. Specifications Parameter Value Model OS4000S Power Supply 400 V Power 4.0 kW Airflow Capacity 3000–4000 m³/h Fsdpfx Akey Sgc Aevogf Operating Pressure 3050–2600 Pa Filtration Efficiency 99.00% Number of Filter Cartridges 4 pcs Filter Specification Ø325 × 600 mm Filter Material Polyester Filter Cleaning Method Pneumatic, pulse cleaning Dust Container Capacity 50 l Noise Level ≤ 78 dB(A) Dimensions 900 × 900 × 1950 mm Why Choose the OS-4000S? High extraction performance – effective suction of fumes and dust near the welding arc. Large-surface cartridge filtration system – highly efficient separation of fine particles. Automatic pneumatic filter cleaning – stable operation with fewer maintenance interruptions. Dust collection container – fast and convenient emptying without mess. Easy operation – user-friendly controls and quick access to consumable components. Effective Filtration and Consistent Suction Power The OS-4000S uses a multi-stage filtration system based on cartridge filters. This allows the unit to efficiently capture fine dust and welding fume particles. Additionally, the pneumatic pulse cleaning system shakes dust off the filter surfaces, which: maintains constant suction efficiency, extends filter service life, reduces performance loss during intensive operation. Comfort and Safety at the Workstation Extracting contaminants directly at the source provides immediate benefits: less smoke in the operator’s working zone, improved weld visibility and more stable working conditions, cleaner workshop environment and reduced dust accumulation on machines and installations. Applications The CORMAK OS-4000S is suitable for: MIG/MAG, TIG, and MMA welding, metalworking and maintenance operations in production facilities, grinding and deburring near the workstation, light cutting and processing operations that generate dust and fumes.

Condition: new, Year of construction: 2026, The CORMAK ODL6K extraction and filtration system is a modern solution that provides safe working conditions for operators and effective protection of laser system components against contamination and damage. Filtration at a level of 99.9% removes harmful particles and fumes, guaranteeing clean air in the workplace. The ODL6K is distinguished by an automatic filter cleaning system, an efficient fan, and a compact, solid design that allows for easy integration with various cutting systems. An additional advantage is the ergonomic waste drawer, which allows for quick and convenient emptying of collected waste. This is a comprehensive solution that increases safety, improves work efficiency and extends the service life of laser systems. The ODL6K combines automatic filter cleaning with compressed air, an efficient fan generating high negative pressure and filtration at a level of 99.9% for particles of 0.3 μm thanks to the use of appropriate filters. The system is equipped with an ergonomic dirt drawer, which allows for quick and convenient removal of accumulated dust without the need for disassembly. Additionally, thanks to the modular design, it is possible to mount extraction nozzles on both the left and right side of the device, which allows for flexible adjustment of the installation to the layout of the production hall. ODL6K is a compact, efficient and reliable solution for any laser cutting system - increasing safety, comfort and work efficiency. The main functions of the exhaust gas extraction and filtration system in the laser processing process are: Removal and neutralization of laser smoke. Ensuring work safety at the laser station and in its immediate vicinity. Extending the service life of laser systems by keeping them clean and protecting important components from contamination. The most important advantages of the CORMAK ODL6K extraction system: The extraction system has automatic filter cleaning using compressed air. Under the influence of pressure, the filter is "shaken off", which effectively cleans the filter cartridge and thus extends its service life. Thanks to this, the system maintains its efficiency for a longer period of time. The filter element used in the system is imported and made of high-quality material. The Nano-type fireproof filter has high filtration efficiency, retaining particles of 0.3 μm in more than 99.9%. Fgsdpewcd I Refx Akvjf The large dust collection drawer allows convenient dust collection and cleaning, which makes the system easy to maintain. The motors used in the system are equipped with overload protection, thus ensuring a high level of protection and trouble-free operation. The specially developed high-performance fan wheel generates a large negative pressure, which allows effective removal of laser exhaust gas and ensures high airflow efficiency. The total purification efficiency of the system is 0.3 μm, and the efficiency is more than 99.9%, which shows the high efficiency of the exhaust in removing harmful particles from the air. In addition, it is characterized by a compact structure, which makes it easy to operate and maintain. Technical parameters Number of filter cartridges 6 Air flow 6000 m³/h Air pressure 3000 Pa Filtration efficiency 99.99% Filter size 350x660 mm Fan power 7.5 kW Inlet diameter 300 mm Weight 590 kg Dimensions (L x W x H) 1150 x 1950 x 2250 mm