Used welding sets for sale (421)

Condition: new, welding current 20 - 60 A cutting capacity 1 - 20 mm open-circuit voltage 104 V Required air-pressure min. 4 bar connected load 7,9 kW connected load frequency 400 V weight 16 kg Dimensions (LxWxH) 480 x 260 x 360 mm Digital display. Surge protection. Plasma torch. Earth cable. Reducing valve with moisture separator. Equipped with IGBT technology "Delivered without CEE plug". Gkodpfxsupxuvo Ag Def

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, warranty duration: 3 months, type of cooling: air, welding current (min.): 40 A, welding current (max.): 350 A, For sale: Lascentrum Mig 350 DP 40-350 AMP 400 Volt Gas-cooled Pulse Synergic 2/4 Step 4 Roller drive Fixed programs Gkjdpfx Asxbcqxeg Dsf Program memory Steel, Stainless Steel, and Aluminum weldable Refurbished, tested, and serviced. Including MIG/MAG Welding torch, earth work lead, gas cable, and 3 months warranty. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, weight of the machine ca. 110 kg dimensions of the machine ca. 950 x 435 x 980 mm ESS's newly developed "mti inverter series" for single-phase welding equipment, , which has already proven itself thousands of times over, is now being expanded to include a three-phase system. The combination of semiconductor technology, resonant inverter circuits and classic transductor technology also offers thepossibility of integrating the respective advantages into future- orientated welding devices in this case. --> Technical data Mains connection: 3/PE AC 400 V --> Maximum primary power: 14 kVA Gedpswf Rg Ssfx Ag Dokf --> Mains fuse: T 16 A --> Setting range: 5 - 300 A --> Stick electrodes: Ø 1.5 - 5 mm --> Protection class: IP 23 --> Water cooling unit for the welding torch: built-in

Condition: like new (used), Year of construction: 2024, REHM P 300 W 0.8/1.0 with Profi trolley Condition: Demonstration machine Scope of delivery: - Abicor Binzel 401, 4m - Ground cable 5m Gkedpfx Agoxamgbj Dof - Pressure regulator - Basket spool adapter

Condition: like new (used), Exceptional machine for professional TIG welders WELDKAR The TIG 320 AC/DC Pulse features a 320 Amp power source (60% duty cycle) at 400 Volts. Under continuous operation, the maximum welding current is 250 Amps. This TIG welder is perfectly suited for (medium to) heavy industrial work and series production. - WK TIG 320 AC/DC Pulse power source with EMC - WK MIG 5040F / WK TIG 320 AC/DC water cooler – 5 liters - Chassis for WK TIG 320 AC/DC Pulse - Tig welding torch WK 18 – 4 meters, water-cooled - Inline water unit WK MIG 5040F / WK TIG 320 AC/DC - Wireless remote control for WK TIG 320 AC/DC Pulse - Foot pedal for WK TIG 320 AC/DC Pulse - Welding cable set 300A WKP 35-70, 35mm² - Ground cable set 300A WKP 35-70, 35mm² NET PRICE: 10,500 GROSS PRICE: 12,915 Gkodpfx Agexf Nvpj Dof

Condition: excellent (used), Year of construction: 1996, ESAB LHF 400 Welding Rectifier / Electrode Welder Infinitely variable welding current range up to 400 A, power 400 A at 35% duty cycle, 315 A at 60% duty cycle, weight 165 kg, ... Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Gedpsv N Hkcofx Ag Djkf

Condition: new, welding current 5 - 160 A connected load frequency 230 V weight 7,9 kg Dimensions (LxWxH) 310 x 140 x 230 mm ESAB inverter TIG welding machine Rogue ET 180i CE TIG DC An excellent high-frequency TIG ignition ensures a faultless welding start, as well as even and stable Godpjvkiwbsfx Ag Dokf arc properties. Easy to use - setting up the welding parameters is simple and intuitive. Robust design IP23S housing for applications in production plants and on construction sites. Comprehensive TIG functions for optimal process control for every application and a pulse function of up to 500Hz to control the ideal heat input. A PFC module ensures a stable arc and insensitivity to mains fluctuations - even when working with long extension cables of up to 100 meters (PRO version only). Optionally, the welding current can be set from the TIG torch, foot pedal or hand-held remote control. technical data: Primary voltage, 1-phase 230 VAC ±15%, 1 Ph, 50/60 Hz Maximum welding current 180 A Nominal apparent power in kVA 8 kVA Energy saving mode 30 W Open circuit voltage 63 V DC MMA - max. load at 20% duty cycle 170 A/26.8 V at 60% duty cycle 97 A/23.9 V at 100% duty cycle 75 A/23.0 V TIG - max. load at 25% duty cycle 180 A/17.2 V at 60% duty cycle 116 A/14.6 V at 100% duty cycle 90 A/13.6 V Current range 10-180 A Operating temperature -10 to +40 °C Housing protection class IP23S Test mark CE Dimensions, L x W x H 403 x 153 x 264 mm Weight 8.7 kg Scope of delivery: Shoulder strap, 4 m TIG torch type SR-B 26, a wear part set, including tungsten electrode 2.4 mm and 3 m workpiece cable with clamp

Condition: good (used), Remote control for inert gas welding device, inert gas device, welding rectifier, hand controller -Manufacturer: Fronius, remote control RCU5000i .: 4,046,098 Gedpsgrlppofx Ag Dskf -Voltage: U1 24 V -Dimensions: 180/260/H50 mm -Weight: 1.5 kg

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). Godewf Rgropfx Ag Djkf --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 0000243380, type of input current: DC, Very good welding machine from EWM. Was used as a replacement unit in our operation, therefore only lightly used. Here are some details: • TIG and MMA inverter DC welding machine • Mobile, water-cooled, 5m power supply cable • Faster and higher-quality welding thanks to EWM activArc technology • COMFORT control: proven convenience; all essential welding parameters directly accessible, up to 8 JOBs (welding tasks) can be programmed by the user for recurring welding operations • Maximum efficiency and outstanding quality thanks to fully digital inverter welding technology • Suitable for production and repair work in the food and chemical industry, pipeline, vessel, plant, vehicle, and mechanical engineering, as well as robotic applications • Intelligent enclosure design with optimized airflow for better cooling performance and reduced internal contamination • Excellent mobility: easy to move thanks to large wheels, fits through standard doors, and easy loading/unloading due to equal wheel track width Gsdpsxfgg Sofx Ag Dokf • TIG welding with HF ignition and Liftarc • Spot mode, 2-stroke, 4-stroke, tacking, pulsing, and kHz pulsing (2.5 kHz) • Adjustable parameters: start, welding, downslope, and end current; pre- and post-gas flow time; up and down slope time; pulse and pause times; ignition management • MMA welding: adjustable hot start current and time, arc force, anti-stick • Digital display for welding voltage, current, and parameters • High-performance cooling system with centrifugal pump and large 12-litre tank, pressure switch, pump and fan are temperature-controlled

Condition: like new (used), New industrial welding machine WELDKAR Multi-GMAW 400S DP Multi-GMAW 400S DP Features: TIG HF, LIFT TIG, MMA, MIG Double-pulse MIG Synergic operation Input voltage: 3-phase AC 400 V ± 10% Selectable water/air cooling IGBT module High duty cycle MCU control system Enhanced protection Tested at 550 V Generator-friendly Power supply: 3-phase Duty cycle: 60% at 400 A / 100% at 310 A Enables activation of dedicated pulse curves for aluminium, mild steel, and CuSi3 Waveform control for additional arc stability, even at low currents Digital control of all welding parameters Gkodpfxexf Nvis Ag Dof Generator-friendly design allows cooperation with diesel generators, preventing failures caused by voltage spikes Protections include phase loss, overheating, overvoltage, undervoltage, and overcurrent NET PRICE: 10,000 GROSS PRICE: 12,300

Condition: good (used), machine/vehicle number: 202 0239, range of control current flow: 25 - 190 A range of control alternating flow: 25 - 190 A current flow 60% ED: 190 A current flow 100% ED: 160 A alternating flow 60% ED: 170 A alternating flow 100%ED: 160 A Gsdpjcvbu Rsfx Ag Djkf space needed: 1200 x 600 x 800 mm weight: 300 kg

Condition: new, welding current max. 70 A cutting capacity max. 25mm mm open-circuit voltage 120 V Gkedpfx Agowfyq Hj Def Required air-pressure min. 4 bar connected load 9,2 kW connected load frequency 400 V weight 0,28 kg Dimensions (LxWxH) 1,7 x 1,0 x 1,2 mm

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. Gsdpfxjwf Rg Ee Ag Dekf In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: like new (used), The MULTIMIG F SYN series welding machines feature state-of-the-art technology. Instead of the conventional 50 Hz frequency used in transformers, these welders operate at frequencies ranging from 20 kHz to 50 kHz. This provides the equipment with excellent dynamic response, portability, compact size, low weight, reduced energy consumption, and more. Gkjdpfx Agoxfln Uj Djf The MULTIMIG F SYN welding machines are suitable for welding various materials such as stainless steel, carbon steel, alloyed steel, etc. Therefore, they can be used in general metalworking industries, machinery and equipment repair, construction, production and repair of installations in the petrochemical industry, DIY workshops, and more. Features of the MULTIMIG F SYN series welders: - Digital control system with accurate welding parameter display - High-performance multifunctional power source (MIG/MAG) - Dynamic control and stable welding parameters - IGBT technology for low energy consumption - Rated duty cycle: MULTIMIG 500F SYN = 500A at 60% (40°C) Specification: - Input voltage (V): 3~380/400/440±10% - Frequency (Hz): 50/60 - Input current (A): MIG 43; TIG 32; MMA 43 - Output power (kW): MIG 23; TIG 18; MMA 23 - Welding current (A): 40-500 (MIG) - Welding voltage (V): 10-50 (MIG) - Open circuit voltage (V): 63 - Duty cycle (40°C): 60% at 500A, 100% at 400A - Wire diameter (mm): Fe: 0.6/0.9/1.0/1.2/1.6; SS: 0.8/0.9/1.0/1.2/1.6; Flux-cored: 0.6/0.8/0.9/1.0/1.2/1.6 - Protection class: IP23 - Insulation class: H - Dimensions (mm): 605x240x445 - Weight (kg): 31.5 - Power factor: 0.7 Includes cooler, trolley, torch, and ground cable. Set includes: 500F SYN power source, cooler, trolley, power supply box, MB 500 4m water-cooled torch, and ground cable. Net price: 9,500 Gross price: 11,685

Condition: ready for operation (used), welding circuit at 60% ED: 310 A welding circuit at 100% ED: 235 A electrical connection: 400 V Gsdpfx Ajd R S Dfjg Dokf space needed: 1000 x 750 x 630 mm

Condition: new, Year of construction: 2012, welding current 20 - 100 A cutting capacity max. 35mm mm open-circuit voltage 250 V Required air-pressure min. 4 bar connected load 20 KVA connected load frequency 400 V weight 0,7 kg Dimensions (LxWxH) 1,0 x 0,6 x 0,8 mm Plasma cutting machine with cart Gkjdpfx Asw En E Esg Dsf - Includes 7m hose package - Spare nozzles

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 Gjdpowf Rgxofx Ag Dskf --> Cooling type: F --> Protection class: IP 23

Condition: excellent (used), machine/vehicle number: 4220.515, range of control: 20 - 180 A welding circuit at 100% ED: 135 A electrical connection: 380 V Gjdpfxod Hn Ufj Ag Djkf space needed: 650 x 550 x 850 mm weight: 118 kg

Condition: new, welding current max. 300 A open-circuit voltage 55 - 76 V connected load frequency 400 V weight 150 kg Dimensions (LxWxH) 900 x 400 x 900 mm Accessories for inert gas welding machine: Hose package 4m. Earth cable 4m Accessories for inert gas welding machine: Hose package 4m. Ground cable 4m Gkedpfx Ajvn U Erjg Dof

Condition: good (used), machine/vehicle number: 75804, Welding current range AC Tig: 7 - 390 A Welding current range direct current Tig: 6 - 230 A Gedpfx Ajb Nv Ireg Djkf Electr. connection: 380 V, 45 A space requirement: 1100 x 600 x 1370 mm

Condition: new, welding current max. 300 A open-circuit voltage 55 - 76 V connected load frequency 400 V weight 75 kg Dimensions (LxWxH) 950 x 560 x 880 mm Inert gas welding machine: - with pulse function - 300 amps - 400 volts Gkodpfsu Aw Shsx Ag Def - hose package 3m. - ground cable - Wire feed rolls for 0.8 - 0.9 - 1.0 - 1.2 - 2.5 - 3.2 - 4.0 and 5.0mm

Condition: new, welding current 10 - 180 A open-circuit voltage V connected load frequency 230 V weight 6,8 kg Dimensions (LxWxH) 403 x 153 x 264 mm Electrode welding machine with accessories: Electrode cable Gedovkixfepfx Ag Djkf Ground cable 4m Shoulder strap

Condition: new, Year of construction: 2023, welding current 30 - 100 A cutting capacity max. 50mm mm open-circuit voltage 170 V Required air-pressure min. 4 bar connected load frequency 400 V weight 0,75 kg Dimensions (LxWxH) 1,2 x 0,7 x 1,0 mm Plasma cutting machine with cart Gsdpfew En Erjx Ag Dekf - 105 RTX torch - Includes 7m hose package - Spare nozzles - Like new, ready for immediate use

Condition: new, current intensivity 200 A capacity at 100% load 150 A 230 V weight of the machine ca. 9,0 t dimensions of the machine ca. 0,46 x 0,15 x 0,32 m TIG welding system - New - 3m hose package - Additional 8m hose package - Ground cable Gksdpfx Agowrzrxj Dof - Gas connection hose - Documentation